Leviton 1222-2W Double-Pole AC Quiet Switch Instruction Manual

1. ምርት አብቅቷልview

The Leviton 1222-2W is a 20 Amp, 120/277 Volt, Toggle Double-Pole AC Quiet Switch designed for extra heavy-duty applications. This industrial-grade switch features a self-grounding design and supports both back and side wiring for flexible installation. It is built with high-quality materials to ensure durability and reliable performance.

ቁልፍ ባህሪዎች

• Industrial Quality: Constructed for demanding environments.
• Heavy Gauge Copper Alloy Arm: Ensures top performance and longevity.
• Large Silver Cadmium-Oxide Contacts: Designed for long life, preventing sticking, welding, and excessive pitting.
• Fully Enclosed Switch Mechanism: Housed in a rugged enclosure for strength, track, and arc resistance.
• Wire Lead Switches: Facilitates fast and easy installation.

ምስል 1: የፊት view of the Leviton 1222-2W Double-Pole AC Quiet Switch. Shows the white toggle and the metal mounting strap.

2. የደህንነት መረጃ

ማስጠንቀቂያ፡- To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that the power is off before wiring! This device must be installed in accordance with all national and local electrical codes.

• Always disconnect power at the service panel before working on any electrical circuit.
• እንደ የደህንነት መነጽር እና የተዘጉ ጓንቶች ያሉ ተገቢ የግል መከላከያ መሳሪያዎችን (PPE) ይጠቀሙ።
• ስለነዚህ መመሪያዎች ማንኛውም ክፍል እርግጠኛ ካልሆኑ ብቃት ያለው ኤሌክትሪክ ያማክሩ ፡፡
• Do not use this switch with loads exceeding its specified ratings (20 Amps, 120/277 Volts AC).
• ይህ ምርት በካሊፎርኒያ ግዛት ካንሰር፣ የልደት ጉድለቶች ወይም ሌሎች የመራቢያ ጉዳቶችን እንደሚያስከትሉ የሚታወቁ ኬሚካሎችን ይዟል (የፕሮፖዚሽን 65 ማስጠንቀቂያ)። ከተያዙ በኋላ እጅዎን ይታጠቡ።

3. ዝርዝሮች

4. ማዋቀር እና መጫን

Follow these steps carefully to install your Leviton 1222-2W Double-Pole AC Quiet Switch. Ensure all safety precautions are observed.

የሚያስፈልጉ መሳሪያዎች፡-

• Screwdriver (ፊሊፕስ እና ፍላቴድ)
• የሽቦ መለጠፊያዎች / መቁረጫዎች
• ጥራዝtage ሞካሪ
• የኤሌክትሪክ ቴፕ (አማራጭ)

የመጫኛ ደረጃዎች

1. ኃይል አጥፋ፡ Locate the circuit breaker or fuse that controls the power to the switch location. Turn it OFF. Use a voltage tester to confirm that the power is completely off at the switch box.
2. የድሮ ማብሪያ / ማጥፊያን ያስወግዱ (የሚመለከተው ከሆነ) Carefully remove the wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch, noting their positions.
3. ሽቦዎችን ማዘጋጀት; If necessary, strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. Ensure wire ends are clean and straight.
4. ተርሚናሎችን ይለዩ፡ The Leviton 1222-2W switch has four terminals for line and load connections, plus a green grounding screw. For a double-pole switch, there will be two 'LINE' terminals (for incoming power) and two 'LOAD' terminals (for outgoing power to the device). The switch is marked 'LINE' and 'LOAD' on the back.


ምስል 2፡ ተመለስ view of the switch, indicating 'LINE' and 'LOAD' terminals for wiring connections. Note the green grounding screw at the bottom.

5. የመሬት ሽቦን ማገናኘት; Connect the bare copper or green insulated ground wire from the electrical box to the green grounding screw on the switch. Tighten securely.
6. የግንኙነት መስመር ሽቦዎች; Connect the two incoming hot (usually black) wires from the power source to the two 'LINE' terminals on the switch. You can use either the side screw terminals or the back-wire holes. Tighten screws firmly if using side terminals.
7. የጭነት ሽቦዎችን ያገናኙ፡ Connect the two outgoing hot (usually black) wires leading to the fixture or appliance to the two 'LOAD' terminals on the switch. Tighten screws firmly.

ምስል 3: የጎን ፕሮfile of the switch, showing the depth and the toggle in the 'ON' position. This view highlights the robust construction.
8. መቀየሪያውን ይጫኑ፡ Carefully fold the wires into the electrical box, leaving enough room for the switch. Secure the switch to the electrical box using the provided mounting screws.
9. የግድግዳ ሰሌዳን ጫን Attach the wall plate over the switch.
10. ኃይልን ወደነበረበት መልስ Turn the power back ON at the circuit breaker or fuse box. Test the switch to ensure proper operation.

5. ኦፕሬሽን

The Leviton 1222-2W is a simple ON-OFF toggle switch. To operate:

• ለማብራት፡- Push the toggle lever to the 'ON' position (typically upwards).
• ለማጥፋት፡- Push the toggle lever to the 'OFF' position (typically downwards).

ምስል 4: የጎን ፕሮfile of the switch, showing the depth and the toggle in the 'OFF' position. This view highlights the robust construction.

6. ጥገና

The Leviton 1222-2W switch is designed for long-term, maintenance-free operation under normal conditions. However, periodic checks can help ensure continued safety and performance:

• ማጽዳት፡ ማብሪያና ማጥፊያውንና የግድግዳ ሰሌዳውን ለማጽዳት፣ ለስላሳ በሆነ ጨርቅ ይጥረጉ፣ damp ጨርቅ. ገላጭ ማጽጃዎችን ወይም ፈሳሾችን አይጠቀሙ. ከማጽዳትዎ በፊት ኃይል መጥፋቱን ያረጋግጡ።
• ምርመራ፡- Periodically inspect the switch and wall plate for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power and replace the switch.
• ጥብቅነት፡ If the switch feels loose in the wall box, turn off power and gently tighten the mounting screws. Do not overtighten.

7. መላ መፈለግ

If you experience issues with your Leviton 1222-2W switch, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, contact Leviton customer support or a qualified electrician.

8. ዋስትና እና ድጋፍ

የዋስትና መረጃ፡-

This Leviton 1222-2W Double-Pole AC Quiet Switch is covered by a የ10-አመት የተወሰነ ዋስትና. This warranty covers defects in materials and workmanship under normal use and service. For full warranty details, please refer to the official Leviton warranty statement or contact customer support.

የደንበኛ ድጋፍ፡

For technical assistance, product inquiries, or warranty claims, please contact Leviton customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (1222-2W) and purchase date available.