PRECISION Professional Tattoo Needle Bars with Round Tip - 100 Count Instruction Manual

1. መግቢያ

This manual provides essential information for the proper use and maintenance of your PRECISION Professional Tattoo Needle Bars with Round Tip. Please read these instructions carefully before use to ensure safety and optimal performance. These needle bars are designed for professional tattoo artists to custom assemble tattoo needles.

2. ምርት አብቅቷልview

The PRECISION Professional Tattoo Needle Bars are crafted from stainless steel, measuring 4 ¾ inches in length. They feature a round tip and a loop end with a diameter of 2mm-2.5mm, designed for attaching to a tattoo machine's nipple. These bars are intended for custom assembly of tattoo needles, allowing artists to create specific needle configurations for various tattooing tasks such as color packing, shading, or fine lines.

Image 1: A single PRECISION Professional Tattoo Needle Bar, showing its stainless steel construction and round tip.

ቁልፍ ባህሪዎች

• ብዛት፡ 100 bars per pack.
• የአሞሌ መጠን፡ 4 ¾ inches (approximately 12.06 cm) long.
• Bar Loop Size: 2mm-2.5mm diameter for secure attachment.
• ቁሳቁስ፡ Stainless steel construction for durability and hygiene.
• ጠቃሚ ምክር አይነት፡ Round tip end.

3. ማዋቀር እና መሰብሰብ

These needle bars are components for custom tattoo needle assembly. They are not pre-assembled needles. The process involves attaching individual tattoo needles to the bar in a desired configuration.

አስፈላጊ መሣሪያዎች እና ቁሳቁሶች (አልተካተቱም)

• Sterile tattoo needles (loose)
• Soldering iron and solder (lead-free, tattoo-grade)
• ማጉላት lamp or loupe
• Sterile gloves and clean workspace
• Appropriate sterilization equipment (autoclave)

የመሰብሰቢያ ደረጃዎች

1. አዘገጃጀት፥ Ensure your workspace is clean and sterile. Wear sterile gloves.
2. የመርፌ ምርጫ፡ Select the desired number and type of loose tattoo needles for your configuration (e.g., liners, shaders).
3. ዝግጅት፡- Carefully arrange the selected needles onto the round tip of the needle bar, ensuring even spacing and alignment according to your desired pattern.
4. መሸጥ፡ Using a soldering iron and tattoo-grade solder, carefully solder the needles to the bar. Ensure strong, smooth joints without excess solder that could impede needle movement or hygiene.
5. ምርመራ፡- Visually inspect the assembled needle for any defects, loose needles, or sharp edges. Ensure the needles are perfectly aligned and securely attached.
6. ማምከን፡ After assembly, the entire needle bar with attached needles MUST be thoroughly cleaned and sterilized using an appropriate method (e.g., autoclave) before any use on skin. Follow strict sterilization protocols.

4. የአሠራር መመሪያዎች

Once assembled and sterilized, the custom tattoo needle bar is ready for use with a compatible tattoo machine.

አጠቃቀም፡

1. የማሽን ተኳኋኝነት Insert the loop end of the assembled needle bar into the nipple of your tattoo machine's armature bar. Ensure a snug and secure fit.
2. Tube Selection: Use a sterile tattoo tube that matches the size and configuration of your custom-assembled needle.
3. የጥልቀት ማስተካከያ; Adjust the needle depth according to your tattooing technique and client's skin.
4. ነጠላ አጠቃቀም፡- Custom-assembled tattoo needles, like all tattoo needles, are strictly for single-use only. Dispose of safely after each client.

5. ጥገና እና እንክብካቤ

Proper handling and storage are crucial for maintaining the integrity of the needle bars before assembly.

ከስብሰባ በፊት፡-

• ማከማቻ፡ Store needle bars in their original packaging in a clean, dry environment, away from direct sunlight and extreme temperatures.
• አያያዝ፡ Handle bars with clean, gloved hands to prevent contamination.
• ምርመራ፡- Before assembly, inspect each bar for any signs of damage, bending, or corrosion. Do not use damaged bars.

After Assembly (Pre-Sterilization):

• ማጽዳት፡ Thoroughly clean the assembled needle bar to remove any soldering residue or contaminants before sterilization. Use appropriate cleaning solutions designed for tattoo equipment.
• ማምከን፡ Sterilize immediately after cleaning. Follow manufacturer guidelines for your sterilization equipment (e.g., autoclave cycles, chemical sterilants).

6. መላ መፈለግ

This section addresses common issues related to the needle bars themselves, prior to or during the assembly process.

Issue: Needles not attaching securely to the bar.

• ሊሆን የሚችል ምክንያት፡- Insufficient heat from soldering iron, incorrect solder type, or improper technique.
• መፍትሄ፡- Ensure soldering iron is at the correct temperature. Use high-quality, lead-free tattoo-grade solder. Practice soldering technique to achieve strong, clean joints.

Issue: Needle bar appears bent or damaged.

• ሊሆን የሚችል ምክንያት፡- Mishandling during storage or assembly.
• መፍትሄ፡- Do not attempt to straighten bent bars as this can weaken the material. Discard and use a new, undamaged bar.

Issue: Loop end does not fit tattoo machine nipple.

• ሊሆን የሚችል ምክንያት፡- Incompatible machine or nipple size.
• መፍትሄ፡- Verify the diameter of your machine's nipple. The needle bar loop is 2mm-2.5mm. If incompatible, consider using a different machine or an adapter if available.

7. ዝርዝሮች

8. ዋስትና እና ድጋፍ

As these are components for custom assembly, specific warranty information for the assembled product is dependent on the artist's workmanship and the components used. For issues related to manufacturing defects of the PRECISION Professional Tattoo Needle Bars themselves, please contact your retailer or the manufacturer directly with your purchase details.

For further support or inquiries, please refer to the contact information provided by your supplier.