ፊሊፕስ 280909

Philips 17W 24in T8 Bright White Fluorescent Tube User Manual

ሞዴል፡ 280909

መግቢያ

This manual provides essential information for the safe and effective use of your Philips 17W 24in T8 Bright White Fluorescent Tube, Model 280909. Please read these instructions carefully before installation and retain them for future reference.

የደህንነት መረጃ

  • የኤሌክትሪክ አደጋ; Always disconnect power to the fixture before installing, removing, or servicing the fluorescent tube. Failure to do so may result in electric shock or injury.
  • Fragile Item: Fluorescent tubes are made of glass and can break. Handle with care to prevent injury.
  • የሜርኩሪ ይዘት፡- This product contains mercury. Dispose of in accordance with local, state, and federal laws. Visit www.epa.gov/mercury ለበለጠ መረጃ።
  • ተኳኋኝነት Ensure the fluorescent tube is compatible with your fixture's ballast and socket type (G13 Medium Bi-Pin).
  • የቤት ውስጥ አጠቃቀም ብቻ; ይህ አምፖል የተሰራው ለቤት ውስጥ ትግበራዎች ነው.

ምርት አልቋልview

The Philips 17W 24in T8 Bright White Fluorescent Tube is designed to provide efficient and bright illumination. It features a T8 bulb shape and a G13 (Medium Bi-Pin) base for standard fluorescent fixtures.

Philips 17W 24in T8 Bright White Fluorescent Tube

Figure 1: Philips 17W 24in T8 Bright White Fluorescent Tube. This image shows the cylindrical glass tube with bi-pin connectors at each end.

ዝርዝሮች

ባህሪዝርዝር
የምርት ስምፊሊፕስ
የሞዴል ቁጥር280909
ዋትtage17 ዋት
አምፖል ቅርጽ መጠንT8
አምፖል ቤዝG13 (መካከለኛ ባይ-ፒን)
ፈካ ያለ ቀለምብሩህ ነጭ
የቀለም ሙቀት5000 ኬልቪን
ብሩህነት1300 Lumens
የቀለም አቀራረብ መረጃ ጠቋሚ (ሲአርአይ)82
ጥራዝtage240 ቮልት (ኤሲ)
ርዝመት24 ኢንች
ዲያሜትር1 ኢንች
የተገመተ ሕይወት24,000 hours (approx. 22.2 years based on 3 hrs/day)
የቤት ውስጥ / የውጭ አጠቃቀምየቤት ውስጥ

ማዋቀር እና መጫን

  1. የኃይል ግንኙነት መቋረጥ; Before beginning installation, ensure the power supply to the fluorescent light fixture is completely turned off at the circuit breaker or fuse box.
  2. የድሮ ቱቦን ያስወግዱ (የሚመለከተው ከሆነ) If replacing an existing tube, carefully twist the old tube approximately 90 degrees and gently pull it out of the sockets. Dispose of the old tube properly according to local regulations.
  3. መጋጠሚያን ይፈትሹ; Check the fixture's sockets and wiring for any damage. Ensure the ballast is compatible with T8 fluorescent tubes.
  4. Install New Tube: Align the two pins at each end of the Philips T8 fluorescent tube with the slots in the fixture's sockets. Gently push the tube into the sockets until it is fully seated, then twist it approximately 90 degrees until it locks into place. Do not force the tube.
  5. ኃይልን ወደነበረበት መልስ Once the tube is securely installed, restore power to the fixture from the circuit breaker.
  6. ሙከራ፡- ትክክለኛውን አሠራር ለማረጋገጥ መብራቱን ያብሩ።

If the tube does not light, ensure it is properly seated and twisted into the sockets. If issues persist, refer to the Troubleshooting section.

የአሠራር መመሪያዎች

Operating the Philips T8 fluorescent tube is straightforward. Once installed in a compatible fixture with power restored, simply use the fixture's wall switch or integrated switch to turn the light on and off.

  • ፈጣን በርቷል፡ This fluorescent tube is designed for quick illumination.
  • ምርጥ አፈጻጸም፡ For optimal performance and lifespan, avoid frequent on/off cycling.

ጥገና

  • ማጽዳት፡ To clean the fluorescent tube, ensure the power is off and the tube is cool. Gently wipe the tube with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as these can damage the tube.
  • መተካት፡ Replace the tube when it reaches the end of its life (indicated by flickering, dimming, or failure to light). Follow the installation instructions in reverse to remove the old tube and install a new one.
  • የቤት ዕቃዎች ጥገና; Periodically inspect the light fixture for dust accumulation, loose wiring, or damaged sockets. Clean the fixture as needed.

መላ መፈለግ

ችግርሊሆን የሚችል ምክንያትመፍትሄ
Tube does not light
  • ለማቋቋም ምንም ኃይል የለም።
  • Tube not properly seated
  • Faulty tube
  • Faulty ballast or starter (if applicable)
  • የወረዳ የሚላተም / ፊውዝ ይመልከቱ.
  • Ensure tube is twisted and locked into sockets.
  • Replace tube with a new one.
  • ባላስት/ማስጀመሪያውን ለመመርመር/ለመተካት ብቃት ያለው የኤሌክትሪክ ባለሙያ ያማክሩ።
Tube flickers
  • ቲዩብ ወደ ሕይወት መጨረሻ እየተቃረበ ነው።
  • የላላ ግንኙነት
  • Incorrect ballast
  • Replace tube.
  • Ensure tube is securely seated.
  • Verify ballast compatibility.
ፈዘዝ ያለ የብርሃን ውጤት
  • ቲዩብ ወደ ሕይወት መጨረሻ እየተቃረበ ነው።
  • Dust/dirt on tube or fixture
  • Replace tube.
  • Clean tube and fixture.

የማስወገጃ መረጃ

This fluorescent tube contains a small amount of mercury. It is important to dispose of it responsibly to protect the environment. Do not dispose of fluorescent tubes in regular household trash.

  • እንደገና ጥቅም ላይ ማዋል; Many communities offer recycling programs for fluorescent bulbs. Check with your local waste management authority for recycling options in your area.
  • Hazardous Waste Facilities: Some areas require fluorescent bulbs to be taken to special household hazardous waste collection sites.
  • For more information on mercury-containing products and disposal, please visit the U.S. Environmental Protection Agency (EPA) webጣቢያ፡ www.epa.gov/mercury.

ዋስትና እና ድጋፍ

For warranty information and customer support regarding your Philips fluorescent tube, please refer to the documentation provided with your purchase or visit the official Philips lighting website. Philips products are designed for quality and reliability.

Contact Philips: For technical assistance or product inquiries, please visit www.lighting.philips.com ወይም በምርት ማሸጊያው ላይ የቀረበለትን የእውቂያ መረጃ ይመልከቱ።

© 2026 ፊሊፕስ. ሁሉም መብቶች የተጠበቁ ናቸው።

ይህ ማኑዋል ያለማስታወቂያ ሊለወጥ ይችላል ፡፡

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.