የዴካ ፓርቫ 145E የብየዳ ማሽን መመሪያ መመሪያ

1. መግቢያ

Thank you for choosing the Deca Parva 145E Welding Machine. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your new welding equipment. Please read this manual thoroughly before using the machine and keep it for future reference.

The Deca Parva 145E is designed for various welding tasks, offering reliable performance for both hobbyists and professionals. Proper understanding and adherence to these instructions will ensure optimal results and prolong the life of your machine.

2. የደህንነት መመሪያዎች

ማስጠንቀቂያ፡ ብየዳ አደገኛ ሊሆን ይችላል። ከባድ ጉዳት ወይም ሞት እንዳይደርስ ለመከላከል ሁልጊዜ የደህንነት ጥንቃቄዎችን ይከተሉ።

• የኤሌክትሪክ ድንጋጤ Welding current can cause fatal electric shock. Ensure proper grounding. Do not touch live electrical parts. Wear dry, insulated gloves.
• ጭስ እና ጋዞች; Welding fumes and gases can be hazardous to your health. Work in a well-ventilated area. Use a fume extractor if necessary.
• አርክ ጨረሮች፡ የአርክ ጨረሮች ዓይንንና ቆዳን ሊያቃጥሉ ይችላሉ። ተገቢውን የጥላ ማጣሪያ እና የመከላከያ ልብስ ያለው የብየዳ የራስ ቁር ይልበሱ።
• እሳት እና ፍንዳታ; የብየዳ ብልጭታዎችና ትኩስ ብረት እሳት ወይም ፍንዳታ ሊያስከትሉ ይችላሉ። ተቀጣጣይ ቁሳቁሶችን ከብየዳው አካባቢ ያርቁ። የእሳት ማጥፊያ በቀላሉ ይገኛል።
• ይቃጠላል፡ ትኩስ ብረት እና ስላግ ከባድ ቃጠሎ ሊያስከትሉ ይችላሉ። መከላከያ ጓንት እና ልብስ ይልበሱ።
• Pace Makers: የልብ ምት ማስተካከያ ያላቸው ሰዎች ይህንን መሳሪያ ከመጠቀምዎ በፊት ሀኪማቸውን ማማከር አለባቸው።
• ማንኛውንም ጥገና ወይም አገልግሎት ከማከናወንዎ በፊት ሁል ጊዜ ኃይልን ያላቅቁ።

3. የጥቅል ይዘቶች

ሳጥኑን በጥንቃቄ ይክፈቱ እና ሁሉም እቃዎች መኖራቸውን እና ያልተበላሹ መሆናቸውን ያረጋግጡ። ማንኛቸውም እቃዎች ከጠፉ ወይም ከተበላሹ ወዲያውኑ ቸርቻሪዎን ያነጋግሩ።

• Deca Parva 145E Welding Machine
• የኤሌክትሮድ መያዣ ከኬብል ጋር
• መሬት ክሊamp ከኬብል ጋር
• Welding Mask (Handheld)
• Chipping Hammer / Wire Brush
• መመሪያ መመሪያ

4. ምርት አብቅቷልview

The Deca Parva 145E is a compact and robust welding machine designed for various arc welding applications. Below is an image illustrating the main unit and its included accessories.

ምስል 1፡ Deca Parva 145E Welding Machine and included accessories. The image displays the yellow main welding unit, a black handheld welding mask, a black chipping hammer with a wire brush, an electrode holder, and a ground clamp.

ቁልፍ አካላት፡-

• ዋና ክፍል፡ ቢጫ ሐasing with control panel.
• የኃይል መቀየሪያ የማብራት/የማጥፋት መቆጣጠሪያ።
• አሁን ያለው የማስተካከያ ቁልፍ፡ For stepless welding current regulation.
• Thermal Protection Indicator: Illuminates when the machine overheats.
• የውጤት ተርሚናሎች Connections for electrode holder and ground clamp.
• የኤሌክትሮድ መያዣ፡ Secures the welding electrode.
• መሬት ክሊamp: የኤሌክትሪክ ዑደትን ለማጠናቀቅ ከስራ ቦታው ጋር ይገናኛል።
• የብየዳ ጭንብል፡ Provides eye and face protection from arc rays and sparks.
• Chipping Hammer/Wire Brush: Used for removing slag and cleaning welds.

5. ማዋቀር

1. አቀማመጥ፡- Place the welding machine on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure adequate space around the machine for air circulation.
2. የኃይል ግንኙነት; Connect the machine's power cord to a suitable grounded electrical outlet. Ensure the power supply matches the machine's requirements (refer to specifications).
3. Ground Cl ያገናኙamp: መሬቱን ያያይዙት clamp cable to the appropriate output terminal on the welding machine. Securely attach the ground clamp ወደ workpiece ወይም ብየዳ ጠረጴዛ፣ ጥሩ የኤሌክትሪክ ግንኙነትን ያረጋግጣል።
4. የኤሌክትሮድ መያዣን ያገናኙ፡ Attach the electrode holder cable to the other output terminal on the welding machine. Insert a suitable electrode into the electrode holder. The recommended electrode size for this machine is 1.6mm to 3.2mm.
5. የግል መከላከያ መሣሪያዎች (PPE)፡- Before turning on the machine, ensure you are wearing all necessary PPE, including a welding helmet, welding gloves, and protective clothing.

6. የአሠራር መመሪያዎች

1. ማዞር፥ Switch the main power switch to the "ON" position.
2. Set Welding Current: Adjust the current adjustment knob to the desired welding current. The appropriate current setting depends on the electrode diameter and the material thickness being welded. Start with a lower setting and increase as needed.
3. የሥራውን ክፍል ያዘጋጁ; Ensure the workpiece is clean and free of rust, paint, or grease to ensure a good weld.
4. ቅስትን ይምቱ፦ While wearing your welding helmet, gently tap or scratch the electrode against the workpiece to strike an arc. Once the arc is established, maintain a consistent arc length and travel speed.
5. ብየዳ፡ Move the electrode along the joint, maintaining a steady hand and angle. Observe the weld pool and adjust your technique as necessary.
6. የሙቀት መከላከያ; If the thermal protection indicator illuminates, the machine has overheated. Turn off the machine and allow it to cool down before resuming operation. Do not bypass this safety feature.
7. የማጠናቀቂያ ብየዳ፡ When finished, lift the electrode from the workpiece to break the arc. Turn off the welding machine.
8. Post-Weld Cleaning: Use the chipping hammer to remove slag from the weld bead, then use the wire brush to clean the weld.

7. ጥገና

መደበኛ ጥገና የብየዳ ማሽንዎ ረጅም ጊዜ እና ደህንነቱ የተጠበቀ አሠራር ያረጋግጣል።

• ማጽዳት፡ የማሽኑን ውጫዊ ክፍል በደረቅ ጨርቅ በየጊዜው ያጽዱ። ከአየር ማናፈሻ ክፍተቶች አቧራ እና ፍርስራሽ ለማስወገድ የተጨመቀ አየር ይጠቀሙ። ከማጽዳትዎ በፊት ማሽኑ መሰኪያውን መነቀሉን ያረጋግጡ።
• የኬብል ምርመራ; ሁሉንም ኬብሎች (ኃይል፣ ኤሌክትሮድ፣ መሬት) በየጊዜው ይመርምሩ፣ መቆራረጥ፣ መቆራረጥ ወይም ጉዳት እንዳይደርስባቸው ያድርጉ። የተበላሹ ኬብሎችን ወዲያውኑ ይተኩ።
• የተርሚናል ግንኙነቶች፡- Ensure all terminal connections are tight and free of corrosion.
• ማከማቻ፡ Store the welding machine in a dry, clean environment, away from moisture and extreme temperatures.
• የኤሌክትሮድ መያዣ እና የመሬት ክላርamp: Keep these accessories clean and in good working condition. Replace if damaged.

8. መላ መፈለግ

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact customer support.

9. ዝርዝሮች

ማሳሰቢያ፡ ለምርት መሻሻል ያለ ማስታወቂያ መግለጫዎች ሊለወጡ ይችላሉ።

10. ዋስትና እና ድጋፍ

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Deca products are manufactured to high-quality standards, and support is available for any operational issues or technical inquiries.

If you require technical assistance or have questions regarding your Deca Parva 145E Welding Machine, please contact the authorized Deca service center or your point of purchase. When contacting support, please have your model number (0400193 / 322006) and purchase date available.