Whirlpool WK5911BS Water Dispenser User Manual

መግቢያ

This manual provides detailed instructions for the safe and efficient operation of your Whirlpool WK5911BS Water Dispenser. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper use and to prevent potential hazards. Keep this manual for future reference.

The Whirlpool WK5911BS is designed to provide both hot and cold water on demand. Key features include precise temperature control, a digital display showing temperature in Celsius and time, an automatic on/off function for energy efficiency, and a safety lock to prevent accidental hot water dispensing. It accommodates standard 11-liter and 19-liter water bottles and features a durable compressor cooling system with stainless steel side panels.

ጠቃሚ የደህንነት መረጃ

የኤሌክትሪክ ዕቃዎችን በሚጠቀሙበት ጊዜ ሁልጊዜ የእሳት፣ የኤሌክትሪክ ንዝረት እና በሰዎች ላይ የሚደርሰውን ጉዳት ለመቀነስ መሰረታዊ የደህንነት ጥንቃቄዎችን ይከተሉ።

• መሳሪያውን ከመጠቀምዎ በፊት ሁሉንም መመሪያዎች ያንብቡ.
• ይህ መሳሪያ ለቤት ውስጥ አገልግሎት ብቻ የሚውል ነው ፡፡ ከቤት ውጭ አይጠቀሙ ፡፡
• Ensure the dispenser is placed on a flat, stable, and level surface.
• ማከፋፈያውን፣ ገመዱን፣ ወይም ውሃውን ወይም ሌሎች ፈሳሾችን አታስጠምቁ።
• Keep children away from the hot water dispenser spout to prevent burns. The hot water spout has an anti-scald safety feature.
• Unplug the dispenser from the power outlet before cleaning or performing any maintenance.
• በተበላሸ ገመድ ወይም መሰኪያ፣ ​​ወይም መሳሪያው ከተበላሸ በኋላ ወይም በማንኛውም መልኩ ከተበላሸ በኋላ ማንኛውንም መሳሪያ አይጠቀሙ።
• የኃይል ማመንጫው በትክክል መቆሙን ያረጋግጡ.
• Do not block ventilation openings on the appliance.

ማዋቀር

ማሸግ እና አቀማመጥ

1. Carefully remove the dispenser from its packaging. Retain packaging materials for future transport if needed.
2. Place the dispenser upright on a firm, level surface. Ensure there is at least 10 cm (4 inches) of clearance from walls to allow for proper ventilation.
3. ማከፋፈያውን በቀጥታ የፀሐይ ብርሃን ወይም በሙቀት ምንጮች አጠገብ ከማስቀመጥ ይቆጠቡ።

ከኃይል ጋር በመገናኘት ላይ

Before plugging in, ensure the dispenser is upright and a water bottle is installed. Plug the power cord into a grounded electrical outlet. Allow the dispenser to stand for at least 30 minutes before turning it on to allow the compressor fluids to settle.

Installing the Water Bottle

1. Clean the neck of a new 11-liter or 19-liter water bottle.
2. Remove the protective seal from the water bottle cap.
3. Carefully invert the water bottle and place it firmly onto the bottle support on top of the dispenser. Ensure the bottle is seated correctly and water begins to flow into the dispenser's internal reservoirs.

Initial Flushing

Before first use, or after extended periods of non-use, it is recommended to flush the system:

• Once the water bottle is installed, dispense at least 1 liter of water from both the hot and cold spouts (without turning on heating/cooling) to ensure air is purged from the system.
• After flushing, you can turn on the heating and cooling functions.

This image displays the front of the Whirlpool WK5911BS Water Dispenser. It features a sleek black and silver design with clearly marked hot and cold water dispensing buttons, a digital display for temperature and time, and a removable drip tray at the base of the dispensing area.

የአሠራር መመሪያዎች

በማብራት / በማጥፋት ላይ

Locate the power switches on the back of the dispenser. There are separate switches for hot water heating and cold water cooling. Turn them on as desired. The digital display will illuminate.

ውሃ የሚያሰራጭ

• ቀዝቃዛ ውሃ; Place your cup under the cold water spout. Press the blue cold water button. Release the button to stop dispensing.
• ሙቅ ውሃ; Place your cup under the hot water spout. To dispense hot water, first push the red safety lock button, then press the red hot water button. Release both buttons to stop dispensing. The safety lock prevents accidental hot water dispensing.

Temperature Display and Control

The digital display shows the current water temperature in Celsius and the time. Refer to the control panel buttons for adjusting settings if available, or for activating the automatic on/off function.

ራስ-ሰር የማብራት / የማጥፋት ተግባር

The dispenser features an automatic on/off function to save energy. Consult the control panel for specific instructions on how to program this feature. This allows the dispenser to turn off heating/cooling during periods of non-use and reactivate automatically.

ጥገና

ውጫዊውን ማጽዳት

የማከፋፈያውን ውጫዊ ገጽታዎች ለስላሳ፣ d በመጠቀም ይጥረጉamp cloth. Do not use abrasive cleaners or solvents. For stainless steel surfaces, use a stainless steel cleaner.

የሚንጠባጠብ ትሪን ማጽዳት

The drip tray is removable for easy cleaning. Periodically remove the tray, empty any collected water, and wash it with mild soap and water. Rinse thoroughly and dry before replacing.

ማንፀባረቅ

Over time, mineral deposits may accumulate inside the hot water tank. Descaling should be performed periodically, depending on water hardness. Consult a qualified technician or refer to specific descaling instructions if provided with your unit. Always unplug the dispenser before descaling.

Replacing Water Bottles

When a water bottle is empty, carefully lift it off the dispenser. Dispose of the empty bottle properly and replace it with a new, full bottle following the installation steps in the Setup section.

መላ መፈለግ

If you experience issues with your dispenser, refer to the following common problems and solutions:

• ሙቅ ወይም ቀዝቃዛ ውሃ አለመኖር;
  • Check if the hot/cold power switches on the back of the unit are turned on.
  • Ensure the dispenser is plugged into a working electrical outlet.
  • Verify that the water bottle is not empty and is properly seated.
  • Allow sufficient time for the water to heat or cool (typically 15-30 minutes after turning on).
• የውሃ ማፍሰስ;
  • Ensure the water bottle is not cracked or damaged.
  • Check that the water bottle is properly seated on the dispenser.
  • Inspect the drip tray for overflow.
• ያልተለመደ ድምጽ;
  • ከኮምፕሬሰሩ የሚወጣው ትንሽ የማጉረምረም ድምፅ የተለመደ ነው።
  • Ensure the dispenser is on a level surface and not touching any walls or furniture that could ampህያው ንዝረቶች።
• ውሃ አለማሰራጨት;
  • Check if the water bottle is empty.
  • Ensure the bottle is properly installed and water is flowing into the reservoirs.
  • For hot water, ensure the safety lock is pressed simultaneously with the hot water button.

እነዚህን ነጥቦች ካጣራ በኋላ ችግሩ ከቀጠለ፣ እባክዎ የደንበኛ ድጋፍን ያግኙ።

ዝርዝሮች

This image illustrates the approximate height of the Whirlpool WK5911BS Water Dispenser in relation to an average adult, indicating a height of 44 inches (111 cm) for scale.

ዋስትና እና ድጋፍ

For warranty information, customer service, or technical support regarding your Whirlpool WK5911BS Water Dispenser, please refer to the warranty card or documentation included with your purchase. You may also visit the official Whirlpool webለተጨማሪ እርዳታ እና የእውቂያ መረጃ ጣቢያ።