MEAN WELL RSP-750-24 Single Output Power Supply

1. መግቢያ

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the MEAN WELL RSP-750-24 Single Output Power Supply. The RSP-750-24 is a 751.2W power supply providing a 24V output at 31.3A, featuring a Power Factor Correction (PFC) function. Please read this manual thoroughly before using the product.

2. የደህንነት መመሪያዎች

ማስጠንቀቂያ: የኤሌክትሪክ ንዝረት አደጋ. ተከላ እና አገልግሎት መከናወን ያለባቸው ብቃት ባላቸው ባለሙያዎች ብቻ ነው.

• Ensure the power supply is disconnected from the AC mains before any installation, wiring, or maintenance procedures.
• የግቤት ጥራዝ መሆኑን ያረጋግጡtage range matches the specifications of the power supply.
• ከተጠቀሰው ክልል ውጭ ከመጠን በላይ እርጥበት፣ አቧራ ወይም ከፍተኛ የሙቀት መጠን ባለባቸው አካባቢዎች ውስጥ መሳሪያውን አይጠቀሙ።
• Ensure proper ventilation to prevent overheating. The unit relies on air cooling.
• Connect the protective earth (FG) terminal to ground to prevent electric shock.
• የኃይል አቅርቦቱን አይክፈቱ ሐasinሰ. በውስጥም ለተጠቃሚ አገልግሎት የሚሰጡ ክፍሎች የሉም።

3. ባህሪያት

• Universal AC input / Full range (85~264VAC).
• Built-in active PFC function, PF>0.97.
• High efficiency, up to 92%.
• መከላከያዎች: አጭር ዙር / ከመጠን በላይ መጫን / ከቮልtagሠ / ከመጠን በላይ ሙቀት።
• የውጤት ጥራዝtage can be trimmed between 40 ~ 110% by 2 ~ 5.5VDC external control signal.
• Output current can be trimmed between 40 ~ 110% by 2 ~ 5.5VDC external control signal.
• Forced air cooling by built-in DC fan with speed control function.
• Built-in remote ON-OFF control.
• አብሮ የተሰራ የርቀት ስሜት ተግባር።

4. ምርት አብቅቷልview

The MEAN WELL RSP-750-24 power supply is designed for industrial and scientific applications, providing stable and reliable DC power.

ምስል 4.1: የፊት view of the RSP-750-24 power supply, showing the main casing and fan grille.

ምስል 4.2: ጎን view illustrating the input and output terminals, along with control connectors.

Figure 4.3: Product label showing model number, electrical ratings, and general dimensions.

5. መጫን እና ማዋቀር

5.1 ሜካኒካል መጫኛ

The RSP-750-24 unit measures 9.84 x 5 x 1.61 inches (250 x 127 x 41 mm) and weighs 3.61 pounds. Ensure adequate space for air circulation, especially around the fan intake and exhaust. Mount the unit securely using appropriate fasteners. Refer to the mechanical drawing for detailed mounting hole positions.

Figure 5.1: Mechanical specifications and terminal layout. Note the air flow direction for proper cooling.

5.2 AC Input Connection (TB1)

Connect the AC mains power to the input terminal block (TB1) as follows:

• Pin 1: AC/L (Live)
• Pin 2: AC/N (Neutral)
• ፒን 3፡ FG (የፍሬም መሬት)

Ensure all connections are tight and use appropriate wire gauges for the current rating. The unit accepts a universal AC input range of 85~264VAC.

5.3 የዲሲ ውፅዓት ግንኙነት

Connect the load to the DC output terminals. The RSP-750-24 provides a 24V DC output. Observe correct polarity (+V and -V). Use appropriate cabling for the 31.3A output current.

5.4 Control Pin CN50 Connection

The CN50 connector provides various control and monitoring functions. Refer to the pin assignment table below and the detailed function descriptions for proper connection.

Figure 5.2: Detailed function description for each pin on the CN50 control connector, including a basic wiring diagram for the shorting connector.

CN50 Pin Assignment:

5.5 የርቀት ማብራት/ማጥፋት ተግባር

The PSU can be turned ON/OFF by using the "Remote ON/OFF" function via CN50 pins 13 (ON/OFF) and 14 (12V-AUX).

• SW close (Short): PSU በርቷል
• SW open (Open): PSU ጠፍቷል

Figure 5.3: Wiring diagrams for Remote ON/OFF control and DC_OK signal monitoring.

5.6 የርቀት ስሜት ተግባር

The remote sensing function compensates for voltage drop across the load wiring, ensuring accurate voltage at the load terminals. Connect +S (pin 1) to the positive load terminal and -S (pin 3) to the negative load terminal. Ensure sense lines are twisted in pairs to minimize noise pickup.

5.7 የውጤት ጥራዝtagሠ ትሪም

የውጤት ቁtage of the RSP-750-24 can be trimmed between 40% and 110% of its rated value (24V) using an external DC source (2-5.5VDC) connected between PV (pin 5) and GND (pin 10, 11) on CN50.

Figure 5.4: Diagrams illustrating the connections and characteristics for Output Voltage TRIM and Output Current TRIM functions.

5.8 Output Current Trim

The output current of the RSP-750-24 can be trimmed between 40% and 110% of its rated value (31.3A) using an external DC source (2-5.5VDC) connected between PC (pin 7) and GND (pin 10, 11) on CN50.

6. ኦፕሬሽን

6.1 ማብራት / ማጥፋት

Once all connections are secure and verified, apply AC input power. The unit will power on, and the fan will activate. To turn off the unit, remove AC input power or use the Remote ON/OFF function if configured.

6.2 DC_OK Signal Monitoring

The DC_OK signal (CN50 pin 9) is an open collector signal that indicates the output status of the PSU. It is low when the PSU output is within specification (ON) and high impedance when the PSU is off or in fault condition. This signal can be used for external monitoring or control systems.

• 0 ~ 1V: PSU በርቷል
• 3.3 ~ 5.6V: PSU ጠፍቷል

7. ጥገና

The RSP-750-24 power supply is designed for long-term reliability and requires minimal maintenance. However, regular checks can extend its lifespan and ensure optimal performance.

• ማጽዳት፡ Periodically inspect the fan and ventilation openings for dust accumulation. Clean with compressed air or a soft brush to ensure unobstructed airflow.
• የአየር ማናፈሻ; Ensure the operating environment maintains adequate air circulation around the unit. Avoid blocking the fan or air vents.
• ግንኙነቶች፡ Periodically check all input, output, and control wiring connections for tightness and signs of wear or corrosion.

8. መላ መፈለግ

የኃይል አቅርቦቱ እንደተጠበቀው የማይሰራ ከሆነ የሚከተሉትን መሰረታዊ ምርመራዎች ያድርጉ፡

• ምንም ውጤት የለም Voltage:
  • Verify AC input power is present and within the specified range (85-264VAC).
  • Check all input and output wiring for correct connections and tightness.
  • If using the Remote ON/OFF function, ensure it is configured correctly to turn the unit ON.
  • Check for any short circuits or overloads on the output. Disconnect the load and test the power supply independently.
• የውጤት ቁtage መለዋወጥ፡
  • Ensure the load is stable and not drawing intermittent current spikes.
  • If Remote Sense is used, verify the connections are correct and secure.
  • Check for proper ventilation; overheating can cause instability.
• ከመጠን በላይ ማሞቅ;
  • Ensure the fan is operating and not obstructed.
  • የአካባቢ ሙቀት በተወሰነው የክወና ክልል ውስጥ መሆኑን ያረጋግጡ (-25°C እስከ +70°C)።
  • Ensure the load is not exceeding the power supply's rated output. Refer to the derating curve in the specifications section.

If issues persist after performing these checks, contact MEAN WELL technical support or your distributor for further assistance.