Astralpool Aster 99- Sand Filter with Valve (Ø 500) - Instruction Manual

1. ምርት አብቅቷልview

The Astralpool Aster 99- Sand Filter is a high-performance filtration system designed for swimming pools. Constructed from laminated polyester and fiberglass, this filter ensures durability and efficient water purification. It features a lateral selector valve, a manometer for pressure monitoring, and a drain valve for easy water emptying. This manual provides essential information for the safe and effective installation, operation, and maintenance of your filter.

• ግንባታ፡- Laminated polyester and fiberglass for enhanced durability.
• አካላት፡- Equipped with a manometer, drain valve, and lateral selector valve.
• ከፍተኛ የሥራ ጫና; 2.5 kg/cm².
• Maximum Filtration Capacity: 50 m³/h/m².

2. ማዋቀር እና መጫን

Proper installation is crucial for the optimal performance and longevity of your Astralpool Aster 99- Sand Filter. Ensure all connections are secure and watertight.

2.1. የጣቢያ ምርጫ

Choose a level, solid surface for the filter, preferably close to the pool pump and the pool itself. The location should be protected from direct sunlight and adverse weather conditions, and allow sufficient space for maintenance and operation.

2.2. የማጣሪያ ስብሰባ

1. ማጣሪያውን አቀማመጥ፡ Place the filter tank on its designated base.
2. የማጣሪያ ሚዲያ ያክሉ፦ Carefully fill the filter tank with the appropriate amount and type of filter sand (or other media) as recommended by Astralpool. Ensure the central pipe is protected during this process to prevent sand from entering it.
3. Install Multi-Port Valve: Attach the lateral selector valve to the top of the filter tank. Ensure the O-ring is correctly seated and the clamp ደህንነቱ በተጠበቀ ሁኔታ ተጣብቋል።
4. የቧንቧ ማገናኘት; Connect the pump outlet to the "PUMP" port on the valve, the pool return line to the "RETURN" port, and the waste line to the "WASTE" port. Use appropriate fittings and sealants to prevent leaks.
5. Manometer Installation: Screw the manometer into its designated port on the multi-port valve.
6. የፍሳሽ ማስወገጃ ቫልቭ Ensure the drain valve at the bottom of the filter is closed.

ምስል 1፡ Technical drawing of the Astralpool Aster 99- Sand Filter, illustrating key dimensions (D, H, M, N, K) and overall structure. This diagram helps in understanding the physical layout and connection points of the filter.

3. የአሠራር መመሪያዎች

The multi-port valve controls the filter's operation. Always turn off the pump before changing the valve position to prevent damage.

3.1. Valve Positions

• አጣራ፡ Normal filtration mode. Water flows through the filter media and returns to the pool.
• ባክዋሽ፡ Cleans the filter media by reversing water flow. Water is discharged through the waste line.
• ያጠቡ Used after backwashing to settle the filter media and flush out any remaining debris from the waste line.
• ቆሻሻ/ማስወጣት፡ Bypasses the filter, sending water directly to the waste line. Useful for vacuuming heavy debris or lowering pool water level.
• ይድገሙት፡- ማጣሪያውን አልፎ ውሃውን በቀጥታ ወደ ገንዳው ይመልሳል። ማጣሪያ ሳይደረግ ለኬሚካል ስርጭት ጠቃሚ ነው።
• ዝግ፥ Shuts off all flow to the filter and pool. Use for pump maintenance or when the filter is not in use.

3.2. የመጀመሪያ ጅምር

1. Ensure the filter is filled with sand and all connections are secure.
2. Set the multi-port valve to the "BACKWASH" position.
3. Turn on the pump and backwash for 2-3 minutes, or until the water in the sight glass (if present) runs clear.
4. ፓምፑን ያጥፉ.
5. Set the valve to the "RINSE" position.
6. Turn on the pump and rinse for 30-60 seconds.
7. ፓምፑን ያጥፉ.
8. Set the valve to the "FILTER" position.
9. Turn on the pump. The filter is now operating in normal filtration mode.

4. ጥገና

Regular maintenance ensures efficient filtration and extends the life of your Astralpool Aster 99- Sand Filter.

4.1. Backwashing

Backwash the filter when the pressure gauge reading is 0.2-0.3 kg/cm² (3-5 psi) above the clean filter's starting pressure, or when pool water clarity decreases.

1. ፓምፑን ያጥፉ.
2. ባለብዙ ወደብ ቫልቭን ወደ "BACKWASH" ​​ያቀናብሩት።
3. Turn on the pump and backwash until the water in the sight glass runs clear (typically 2-3 minutes).
4. ፓምፑን ያጥፉ.
5. Set the valve to "RINSE".
6. Turn on the pump and rinse for 30-60 seconds.
7. ፓምፑን ያጥፉ.
8. Set the valve to "FILTER".
9. መደበኛውን ማጣሪያ ለመቀጠል ፓምፑን ያብሩ።

4.2. ክረምት (የሚመለከተው ከሆነ)

In colder climates, proper winterization is essential to prevent freeze damage.

• Drain all water from the filter tank by opening the drain valve.
• Remove the manometer and store it in a warm, dry place.
• Set the multi-port valve handle between two positions (e.g., between "FILTER" and "CLOSED") to relieve pressure on the internal seal.
• Disconnect all plumbing and store pipes if necessary.

5. መላ መፈለግ

This section addresses common issues you might encounter with your sand filter.

6. ቴክኒካዊ ዝርዝሮች

Detailed specifications for the Astralpool Aster 99- Sand Filter (Ø 500 model).

• ሞዴል፡ Aster 99- Ø 500
• የግንባታ ቁሳቁስ፡ Laminated Polyester and Fiberglass
• የቫልቭ ዓይነት: Lateral Selector Valve
• የተካተቱ መለዋወጫዎች፡- Manometer, Drain Valve
• ከፍተኛ የሥራ ጫና; 2.5 ኪ.ግ/ሴሜ²
• Maximum Filtration Capacity: 50 ሜ³ በሰአት/ሜ

6.1. Dimensions (for Ø 500 model)

Note: Dimensions are approximate and subject to manufacturing tolerances. Refer to Figure 1 for visual representation of dimensions.

7. የዋስትና መረጃ

Specific warranty details for Astralpool products are typically provided at the point of purchase or within separate warranty documentation. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, refer to the official Astralpool webጣቢያ ወይም የተፈቀደለት አከፋፋይ ያነጋግሩ።

8. የደንበኛ ድጋፍ

For technical assistance, spare parts, or further inquiries regarding your Astralpool Aster 99- Sand Filter, please contact your local Astralpool dealer or visit the official Astralpool webጣቢያ.

Astralpool Official Webጣቢያ፡ www.astralpool.com