ወንድም LS-1217 የልብስ ስፌት ማሽን መመሪያ መመሪያ

1. ማዋቀር

This section guides you through the initial preparation of your Brother LS-1217 sewing machine before its first use.

1.1 ማሸግ እና አቀማመጥ

Carefully remove the sewing machine from its packaging. Retain all packing materials for future transport or storage. Place the machine on a stable, flat surface with adequate lighting. Ensure there is enough space around the machine for comfortable operation and fabric handling.

1.2 የኃይል ግንኙነት

Connect the power cord to the machine's power input jack, then plug the other end into a standard electrical outlet. Ensure the power switch is in the "OFF" position before connecting. The foot controller also connects to a dedicated jack on the machine.

1.3 የመርፌ መጫኛ

1. መርፌውን ወደ ከፍተኛው ቦታ ለማንሳት የእጅ መንኮራኩሩን ወደ እርስዎ ያዙሩት።
2. መርፌውን ይፍቱ clamp በተቃራኒ ሰዓት አቅጣጫ በማዞር ዊንጣውን ይከርክሙት።
3. ጠፍጣፋው ጎን ከማሽኑ ጀርባ ጋር የሚሄድ አዲስ መርፌ ያስገቡ፣ እስከሚችለው ድረስ ወደ ላይ ይግፉት።
4. መርፌውን በጥብቅ ይዝጉት clamp ደህንነቱ በተጠበቀ ሁኔታ ይንጠፍጡ።

1.4 ቦቢን ጠመዝማዛ

Proper bobbin winding is crucial for even stitching.

1. በሾለኛው ፒን ላይ የሾለ ክር ያስቀምጡ.
2. ክርውን በላይኛው የክር መመሪያ እና በቦቢን ጠመዝማዛ የውጥረት ዲስክ ዙሪያ ይምሩ።
3. Insert the thread end into the small hole on the bobbin, from the inside out.
4. Place the bobbin onto the bobbin winder spindle and push the spindle to the right.
5. Press the foot controller gently to start winding. Stop when the bobbin is full and evenly wound.
6. Cut the thread, push the spindle back to the left, and remove the bobbin.

1.5 ማሽኑን መፈተሽ

Follow these steps for correct upper and lower threading.

የላይኛው ክር;

1. የፕሬስ እግርን እና መርፌውን ወደ ከፍተኛ ቦታቸው ከፍ ያድርጉት።
2. የክር ስፖሉን በስፖን ፒን ላይ ያስቀምጡት።
3. በላይኛው ክር መመሪያ በኩል ክር ይምሩ.
4. Pass the thread down into the tension discs, then up and through the take-up lever from right to left.
5. Guide the thread down through the remaining thread guides and finally through the eye of the needle from front to back.
6. Pull about 6 inches of thread under the presser foot and towards the back.

የታችኛው ክር (ቦቢን ማስገባት):

1. የቦቢን ሽፋን ሳህን ይክፈቱ።
2. Insert the wound bobbin into the bobbin case, ensuring the thread unwinds counter-clockwise.
3. Guide the thread into the tension spring of the bobbin case.
4. የቦቢን ሽፋን ሰሃን ይዝጉ.
5. Hold the upper thread lightly, turn the handwheel towards you to lower and raise the needle, catching the bobbin thread. Pull both threads under the presser foot and to the back.

2. ማሽኑን መስራት

This section details the basic operations for sewing with your Brother LS-1217.

2.1 Basic Stitch Selection

Your machine offers various stitch patterns. To select a stitch, turn the pattern selection dial until the desired stitch symbol aligns with the indicator mark. Refer to the stitch chart on your machine for available options.

2.2 Fabric Placement

Place the fabric under the presser foot, aligning the edge with the desired seam allowance guide on the needle plate. Lower the presser foot using the presser foot lever.

2.3 መስፋት መጀመር

With the presser foot lowered, gently press the foot controller. The machine will begin to sew. Guide the fabric gently; do not pull or push it, as this can bend the needle or affect stitch quality.

2.4 የተገላቢጦሽ ስፌት

To secure the beginning and end of a seam, use the reverse stitch lever. Press and hold the lever while sewing to stitch backward. Release the lever to resume forward stitching.

2.5 ስፌት ማጠናቀቅ

When you reach the end of your seam, perform a reverse stitch for a few stitches, then release the foot controller. Raise the needle to its highest position and lift the presser foot. Pull the fabric towards the back, then cut the threads using the thread cutter on the machine or scissors, leaving about 4-6 inches of thread tails.

3. ጥገና

Regular maintenance ensures the longevity and optimal performance of your Brother LS-1217.

3.1 ማሽኑን ማጽዳት

Lint and dust can accumulate in the bobbin area and feed dogs, affecting stitch quality. Disconnect the machine from power before cleaning.

• መርፌውን፣ የፕሬስ ፉትን እና የመርፌ ፕሌቱን ያስወግዱ።
• Use the small brush provided with your machine (or a soft brush) to remove lint from the bobbin case, feed dogs, and surrounding areas.
• Do not use compressed air, as it can push lint further into the machine.
• የማሽኑን ውጫዊ ክፍል ለስላሳና ደረቅ ጨርቅ ይጥረጉ።

3.2 ቅባት

The Brother LS-1217 is designed to be largely maintenance-free regarding lubrication. Avoid applying oil unless specifically instructed by a qualified service technician, as improper lubrication can cause damage.

3.3 መርፌ መተካት

Replace the needle regularly (approximately every 8-10 hours of sewing or after every major project) and immediately if it becomes bent, dull, or burred. A damaged needle can cause skipped stitches, thread breakage, and fabric damage. Refer to section 1.3 for installation instructions.

4. መላ መፈለግ

ይህ ክፍል ሊያጋጥሙዎት የሚችሉ የተለመዱ ጉዳዮችን ይመለከታል እና መፍትሄዎችን ይሰጣል።

እነዚህ መፍትሔዎች ችግሩን ካልፈቱት፣ እባክዎ የደንበኞች ድጋፍን ወይም ብቃት ያለው የአገልግሎት ቴክኒሻን ያነጋግሩ።

5. ዝርዝሮች

Key technical specifications for the Brother LS-1217 Sewing Machine.

• ሞዴል፡ Brother LS-1217
• የስፌት ዓይነቶች: Multiple utility and decorative stitches (e.g., Straight, Zigzag, Buttonhole)
• የመርፌ ስርዓት፡ HAx1 (130/705H)
• የኃይል አቅርቦት; AC 110-120V, 60Hz (North America) / AC 220-240V, 50Hz (Europe/Asia) - (Note: Actual voltagእንደ ክልል ይወሰናል)
• መጠኖች (በግምት): 15.4" x 6.7" x 11.4" (39 ሴሜ x 17 ሴሜ x 29 ሴሜ)
• ክብደት (ግምታዊ) 11 ፓውንድ (5 ኪ.ግ)
• ከፍተኛ የስፌት ፍጥነት፡ በደቂቃ እስከ 750 ስፌቶች
• መብራት፡ Built-in sewing light

6. ዋስትና እና ድጋፍ

For detailed warranty information, please refer to the warranty card included with your original purchase or visit the official Brother support webጣቢያ. ለዋስትና ጥያቄዎች የግዢ ማረጋገጫዎን ያስቀምጡ።

የደንበኛ ድጋፍ፡ For technical assistance, parts, or service, please contact Brother customer support. Contact details can typically be found on the Brother official webጣቢያ ወይም በምርትዎ ሰነድ ውስጥ።

የመስመር ላይ መርጃዎች፡- Additional resources, FAQs, and video tutorials may be available on the official Brother support webጣቢያ.