Brother LS2125, LS2125i, LS2129 Sewing Machine Instruction Manual

1. ማዋቀር እና የመጀመሪያ ዝግጅት

Before operating your Brother sewing machine, ensure it is properly set up and prepared for use. Follow these steps carefully.

1.1 ማሸግ እና የኃይል ግንኙነት

• Carefully remove the machine from its packaging. Retain all packing materials for future transport or storage.
• ማሽኑን በተረጋጋ, ጠፍጣፋ መሬት ላይ ያስቀምጡት.
• የእግር መቆጣጠሪያ መሰኪያውን ከማሽኑ የእግር መቆጣጠሪያ መሰኪያ ጋር ያገናኙ።
• Insert the machine's power cord into the power supply socket, then plug the other end into a suitable wall outlet.

ምስል 1.1፡ Illustration of connecting the power cord and foot controller to the sewing machine. Ensure all connections are secure before powering on.

1.2 የቦቢን መጠምዘዝ

1. በሾለኛው ፒን ላይ የሾለ ክር ያስቀምጡ.
2. Guide the thread through the upper thread guide and around the pre-tension disc.
3. Insert the empty bobbin onto the bobbin winder spindle.
4. Wrap the thread clockwise around the bobbin several times.
5. የቦቢን ዊንደር ስፒል ወደ ቀኝ ይግፉት።
6. Press the foot controller gently to start winding. Stop when the bobbin is full and push the spindle back to the left.
7. Trim the thread.

ምስል 1.2፡ Visual guide for correctly winding the bobbin. Proper bobbin winding is crucial for consistent stitch quality.

1.3 የላይኛውን ክር ማሰር

1. የእጅ መንኮራኩሩን ወደ እርስዎ በማዞር መርፌውን ወደ ከፍተኛው ቦታ ከፍ ያድርጉት።
2. የመጫኛውን እግር ማንሻ ከፍ ያድርጉ ፡፡
3. የክር ስፖሉን በስፖን ፒን ላይ ያስቀምጡት።
4. በላይኛው ክር መመሪያ በኩል ክር ይምሩ.
5. ክርውን ወደ ቀኝ ቻናል፣ ወደ ግራ ቻናል እና ከቀኝ ወደ ግራ በሚወስደው ሊቨር በኩል ያዙሩት።
6. ክርውን ወደ መርፌ አሞሌ ክር መመሪያው መምራትዎን ይቀጥሉ።
7. Thread the needle from front to back. Pull about 6 inches of thread through the needle eye.

ምስል 1.3፡ The complete upper threading path. Incorrect threading can lead to skipped stitches or tangled thread.

1.4 ቦቢን ማስገባት

1. የቦቢን ሽፋን ሳህን ይክፈቱ።
2. የቁስሉን ቦቢን በቦቢን መያዣ ውስጥ ያስገቡት፤ ክርው በተቃራኒ ሰዓት አቅጣጫ እየተዘረጋ።
3. Guide the thread into the tension spring slot.
4. የቦቢን ሽፋን ሰሃን ይዝጉ.
5. Hold the upper thread lightly and turn the handwheel towards you to bring the bobbin thread up through the needle plate hole.
6. ሁለቱንም ክሮች (የላይኛውን እና የቦቢን) ከፕሬስ እግር ስር እና ወደ ማሽኑ ጀርባ ይጎትቱ።

2. የልብስ ስፌት ማሽንዎን ማስተዳደር

This section covers the basic operations and functions of your Brother LS2125, LS2125i, or LS2129 sewing machine.

2.1 ስፌቶችን መምረጥ

• Turn the stitch selector dial to choose your desired stitch pattern (e.g., straight stitch, zigzag stitch).
• Refer to the stitch chart on the machine or in this manual for available patterns.

ምስል 2.1፡ The stitch selector dial. Rotate this dial to choose from various stitch patterns.

2.2 የስፌት ርዝመት እና ስፋት ማስተካከል

• Use the stitch length dial to adjust the length of your stitches. Longer stitches are suitable for basting, shorter for fine work.
• Use the stitch width dial (if available for the selected stitch) to adjust the width of zigzag or decorative stitches.

2.3 የስፌት መሰረታዊ ነገሮች

1. Place the fabric under the presser foot, aligning the edge with a seam guide line on the needle plate.
2. የፕሬስ እግር ማንሻውን ዝቅ ያድርጉ ፡፡
3. Gently press the foot controller to start sewing. The machine will begin stitching.
4. Guide the fabric gently with both hands, but do not push or pull it forcefully.
5. ስፌቱን ለመቀልበስ (ስፌቶቹን ለማሰር)፣ የተገላቢጦሽ ማንሻ/አዝራሩን ተጭነው ይያዙ።
6. When finished, raise the needle to its highest position, raise the presser foot, and pull the fabric towards the back.
7. በማሽኑ ላይ ያለውን የክር መቁረጫ ወይም መቀስ በመጠቀም ክሮቹን ይቁረጡ።

ምስል 2.2፡ The primary sewing area, showing the needle, presser foot, and feed dogs. Always keep fingers clear of the needle.

3. ጥገና እና እንክብካቤ

መደበኛ ጥገና የልብስ ስፌት ማሽንዎ ረጅም ዕድሜ እና ጥሩ አፈፃፀም ያረጋግጣል።

3.1 የቦቢን አካባቢን ማጽዳት

• ማሽኑን ያጥፉት እና ከኃይል ማመንጫው ይንቀሉት.
• መርፌውን እና የፕሬስ እግርን ያስወግዱ.
• Open the bobbin cover plate and remove the bobbin.
• Remove the bobbin case and the feed dog cover plate (if applicable).
• Use the small brush provided with your machine to remove lint and dust from the bobbin case, feed dogs, and surrounding areas.
• ሁሉንም ክፍሎች እንደገና ይሰብስቡ.

ምስል 3.1፡ Steps for cleaning the bobbin and feed dog area. Regular cleaning prevents thread jams and improves stitch quality.

3.2 መርፌውን መተካት

• ማሽኑን ያጥፉት እና ይንቀሉት.
• መርፌውን ወደ ከፍተኛው ቦታ ከፍ ያድርጉት.
• መርፌውን ይፍቱ clamp በተቃራኒ ሰዓት አቅጣጫ በማዞር ዊንጣውን ይከርክሙት።
• አሮጌውን መርፌ ያስወግዱ።
• ጠፍጣፋው ጎን ከማሽኑ ጀርባ ጋር የሚሄድ አዲስ መርፌ ያስገቡ፣ እስከሚችለው ድረስ ወደ ላይ ይግፉት።
• መርፌውን በጥብቅ ይዝጉት clamp ደህንነቱ በተጠበቀ ሁኔታ ይንጠፍጡ።

3.3 ዘይት መቀባት (የሚመለከተው ከሆነ)

Your Brother LS2125 series machine is designed to require minimal oiling. Refer to your specific model's detailed manual for oiling points, if any are recommended. Over-oiling can cause issues.

4. የተለመዱ ጉዳዮችን መላ መፈለግ

This section provides solutions for common problems you might encounter during operation.

5. ዝርዝሮች

General specifications for the Brother LS2125, LS2125i, and LS2129 sewing machine models.

• የሞዴል ቁጥሮች፡- LS2125, LS2125i, LS2129
• Stitch Functions: 10-14 built-in stitches (varies by model), including straight, zigzag, and buttonhole.
• የመርፌ አይነት፡ HAx1 (130/705H)
• የቦቢን ዓይነት፡- Class 15 (metal or plastic)
• የኃይል አቅርቦት; AC 110-120V ፣ 60Hz
• መጠኖች (በግምት): 15.4" W x 6.7" D x 11.6" H (39 cm x 17 cm x 29.5 cm)
• ክብደት (ግምታዊ) 13 ፓውንድ (5.9 ኪ.ግ)
• ከፍተኛ የስፌት ፍጥነት፡ በደቂቃ 750 ጥልፍ

6. ዋስትና እና ድጋፍ

For specific warranty information and customer support, please refer to the warranty card included with your original purchase or visit the official Brother support webጣቢያ.

• የዋስትና ሽፋን፡ Typically includes limited warranty on parts and labor. Duration may vary by region and model.
• የደንበኛ ድጋፍ፡ Contact Brother customer service for technical assistance, parts, or service.
• የመስመር ላይ መርጃዎች፡- ጎብኝ www.brother-usa.com/support for FAQs, video tutorials, and downloadable manuals.