Behringer DI800 V2 Signal Direct Box Instruction Manual

1. መግቢያ

The Behringer DI800 V2 is a professional 8-channel direct injection (DI) box designed to connect instruments or other audio sources directly to a mixing console or amplifier. It converts unbalanced, high-impedance signals into balanced, low-impedance signals, suitable for long cable runs without signal degradation. The DI800 V2 offers flexible power options, including mains power or phantom power from a mixing console, and features an ultra-flat frequency response for transparent audio reproduction.

2. ጠቃሚ የደህንነት መመሪያዎች

• መሳሪያውን ከመጠቀምዎ በፊት እነዚህን መመሪያዎች በደንብ ያንብቡ።
• ለወደፊት ማጣቀሻ እነዚህን መመሪያዎች ያስቀምጡ.
• በምርቱ እና በመመሪያው ላይ ሁሉንም ማስጠንቀቂያዎች ያዳምጡ።
• ይህንን መሳሪያ በውሃ ወይም እርጥበት አጠገብ አይጠቀሙ.
• በደረቅ ጨርቅ ብቻ አጽዳ.
• የአየር ማናፈሻ ክፍተቶችን አያግዱ። በአምራቹ መመሪያ መሰረት ይጫኑ.
• እንደ ራዲያተሮች፣ ሙቀት መመዝገቢያዎች፣ ምድጃዎች፣ ወይም ሌሎች መሳሪያዎችን (ያጠቃልለው) ካሉ የሙቀት ምንጮች አጠገብ አይጫኑ። ampማሞቂያዎች) ሙቀትን ያመነጫሉ.
• የፖላራይዝድ ወይም የመሠረት አይነት መሰኪያ የደህንነት ዓላማን አያሸንፉ። የፖላራይዝድ መሰኪያ አንዱ ከሌላው የሚበልጥ ሁለት ቢላዎች አሉት። የመሠረት ዓይነት መሰኪያ ሁለት ቢላዎች እና ሦስተኛው የመሠረት ፕሮንግ አለው። ለደህንነትዎ ሲባል ሰፊው ምላጭ ወይም ሶስተኛው ዘንበል ተዘጋጅቷል. የቀረበው መሰኪያ ወደ መውጫዎ የማይገባ ከሆነ፣ ጊዜው ያለፈበትን መውጫ ለመተካት የኤሌትሪክ ባለሙያ ያማክሩ።
• የኤሌክትሪክ ገመዱን ከመራመድ ወይም ከመቆንጠጥ ይከላከሉ, በተለይም በፕላጎች, ምቹ መያዣዎች እና ከመሳሪያው የሚወጡበት ቦታ.
• በአምራቹ የተገለጹ አባሪዎችን/መለዋወጫዎችን ብቻ ይጠቀሙ።
• ይህንን መሳሪያ በመብረቅ አውሎ ንፋስ ጊዜ ወይም ለረጅም ጊዜ ጥቅም ላይ በማይውልበት ጊዜ ይንቀሉት።
• ሁሉንም አገልግሎቶች ብቁ ለሆኑ የአገልግሎት ሰራተኞች ያመልክቱ። አፓርትመንቱ በማናቸውም መንገድ ጉዳት ከደረሰ በኋላ ማገልገል ያስፈልጋል፣ ለምሳሌ የኃይል ማስተላለፊያ ገመድ ወይም መሰኪያ ሲበላሽ፣ ፈሳሽ ሲፈስ ወይም ዕቃው ውስጥ ሲወድቅ፣ መሳሪያው ለዝናብ ወይም ለእርጥበት ሲጋለጥ፣ መደበኛውን የማይሰራ ከሆነ። , ወይም ተጥሏል.

3. ማሸግ እና የመጀመሪያ ምርመራ

Upon receiving your Behringer DI800 V2, carefully unpack the unit and inspect it for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately. The package should contain the DI800 V2 unit and a power cable. Ensure all components are present before proceeding with setup.

4. ማዋቀር

4.1 የፊት ፓነል በላይview

ምስል 1፡ Front panel of the Behringer DI800 V2. Each of the 8 channels features an input jack, a link output, a -20dB pad switch, and a ground lift switch. LED indicators show signal presence and phantom power status.

• INPUT (1-8): 1/4" TS/TRS input jacks for connecting instruments or line-level sources.
• LINK (1-8): 1/4" TS/TRS output jacks for connecting the input signal to an amplifier or monitor. This output is parallel to the input.
• -20dB PAD (1-8): Attenuates the input signal by 20dB. Use this for high-output sources to prevent clipping.
• GROUND LIFT (1-8): Disconnects the ground connection between the input and output, which can help eliminate hum or ground loops.
• የኃይል መቀየሪያ; ክፍሉን ያበራል ወይም ያጠፋል.
• PHANTOM POWER LED: Illuminates when phantom power is detected on an XLR output.
• ሲግናል LED፡ የግቤት ምልክት ሲኖር ያበራል።

4.2 የኋላ ፓነል በላይview

ምስል 2፡ Rear panel of the Behringer DI800 V2. It features eight balanced XLR outputs and the AC power input.

• BAL OUT (1-8): Balanced XLR outputs for connecting to a mixing console's microphone inputs.
• AC ግብዓት Standard IEC power connector for connecting the included power cable.

4.3 ክፍሉን ማብቃት

The DI800 V2 can be powered in two ways:

1. ዋና ኃይል; Connect the supplied AC power cable to the AC INPUT on the rear panel and then to a suitable wall outlet.
2. የፍሬም ኃይል The unit can also be powered by 48V phantom power supplied from a mixing console via the XLR outputs. If phantom power is present on at least one XLR output, the unit will power on automatically. The PHANTOM POWER LED on the front panel will illuminate.

ማስታወሻ፡- If both mains power and phantom power are connected, the unit will prioritize mains power. It is recommended to use mains power for consistent operation, especially if phantom power sources are unreliable or vary.

4.4 ግንኙነቶች

• Connect your instrument (e.g., guitar, bass, keyboard) to an ግቤት jack on the front panel using a 1/4" TS or TRS cable.
• If you need to send the signal to an amplifier or monitor on stage, connect a 1/4" TS or TRS cable from the corresponding LINK ጃክ ወደ የእርስዎ ampየሊፋየር ግቤት.
• ያገናኙት። BAL ውጣ XLR output on the rear panel to a microphone input on your mixing console using a balanced XLR cable.

5. የአሠራር መመሪያዎች

5.1 የምልክት ፍሰት

The DI800 V2 takes an unbalanced, high-impedance signal from your instrument, converts it to a balanced, low-impedance signal, and sends it to your mixing console. The LINK output provides a direct, unprocessed copy of the input signal for local monitoring.

5.2 Using the -20dB Pad

If your instrument or audio source has a very high output level, the input signal to the DI800 V2 might be too strong, leading to distortion. In such cases, engage the -20ዲቢ PAD switch for the corresponding channel. This will reduce the input signal level by 20 decibels, preventing clipping and ensuring a clean signal to the mixing console.

5.3 Ground Lift Function

Ground loops can cause an audible hum or buzz in your audio system. The የአፈር ማንሻ switch disconnects the ground connection between the input and output stages of the DI800 V2. If you experience hum, try engaging the GROUND LIFT switch for the affected channel. This often resolves ground loop issues without affecting the audio signal.

5.4 Monitoring Signal Presence

የ ምልክት LED for each channel illuminates when an audio signal is detected at the input. This provides a quick visual confirmation that your instrument is connected and sending a signal to the DI box.

6. ጥገና

• ማጽዳት፡ ከማጽዳትዎ በፊት መሳሪያውን ከኃይል ያላቅቁ። ውጫዊውን ክፍል ለማጽዳት ለስላሳ እና ደረቅ ጨርቅ ይጠቀሙ። ፈሳሽ ማጽጃዎችን ወይም መሟሟቶችን አይጠቀሙ።
• ማከማቻ፡ Store the DI800 V2 in a cool, dry place away from direct sunlight and extreme temperatures.
• አገልግሎት፡ There are no user-serviceable parts inside the DI800 V2. Refer all servicing to qualified service personnel.

7. መላ መፈለግ

8. ዝርዝሮች

9. ዋስትና

For detailed warranty information, please refer to the official Behringer website or contact Music Tribe US support. The warranty typically covers manufacturing defects for a specified period from the date of purchase. Keep your proof of purchase for warranty claims.

የዋስትና መግለጫ፡- Musictribe. Support.

10. ድጋፍ

If you encounter issues not covered in this manual or require further assistance, please visit the official Behringer support website or contact Music Tribe US customer service. You can find contact details and additional resources on their official webጣቢያ.

የመስመር ላይ ድጋፍ Music Tribe Support