SmallRig Universal Bottom Mount Plate with 15mm Rod Support System DBC2272B Instruction Manual

1. መግቢያ

The SmallRig Universal Bottom Mount Plate with 15mm Rod Support System DBC2272B is designed for mirrorless and DSLR cameras, providing a versatile platform for mounting accessories. This baseplate is height-adjustable to ensure compatibility with various camera setups, adhering to the LWS standard.

It features an Arca-compatible quick release (QR) plate and receiver for efficient camera attachment and detachment. The system supports 15mm rods, allowing for the integration of accessories such as lens supports, shoulder pads, matte boxes, and follow focus systems. Multiple 1/4"-20 and 3/8"-16 threaded holes on the bottom enable attachment to tripod plates.

Figure 1: SmallRig Universal Bottom Mount Plate DBC2272B, showing the main baseplate, the detachable quick release plate, and the two included hex spanners.

2. የማዋቀር መመሪያዎች

Follow these steps to set up your SmallRig Universal Bottom Mount Plate:

1. ፈጣን የመልቀቂያ ሳህን ያያይዙ፡ Secure the Arca-compatible quick release (QR) plate to your camera's tripod socket or SmallRig cage using the appropriate screw. Ensure it is tightened firmly.
2. Mount Camera to Baseplate: Drop the QR plate (with the camera/cage attached) into the receiver on top of the baseplate. Tighten the knob screw on the side of the receiver to secure the QR plate in place.
3. ቁመትን አስተካክል; To adjust the height of the baseplate to align with the LWS standard for your specific camera, unscrew the wingnut on the side of the baseplate. Adjust the height as needed, then tighten the wingnut to lock it.
4. Attach 15mm Rods: Insert SmallRig 15mm Rods (e.g., SmallRig 1053) into the rod clamps on the baseplate. Tighten the locking screws on the rod clamps to secure the rods.
5. መለዋወጫዎችን ያክሉ Once 15mm rods are in place, you can attach various accessories such as lens supports (e.g., SmallRig 2152), shoulder pads (e.g., SmallRig 2077), matte boxes, or follow focus systems to the rods.
6. Mount to Tripod (Optional): If desired, attach a tripod plate to the bottom of the baseplate using the available 1/4"-20 and 3/8"-16 threaded holes.

3. የአሠራር መመሪያዎች

Once the baseplate is set up, operating it involves making minor adjustments and utilizing its quick-release functionality.

• ፈጣን የመልቀቅ ተግባር፡ To quickly detach your camera or cage from the baseplate, loosen the knob screw on the QR receiver until the QR plate can be lifted out. To re-attach, simply drop the QR plate back into the receiver and tighten the knob screw.
• የከፍታ ማስተካከያ; If you change cameras or accessories that require a different height alignment, repeat step 3 from the Setup Instructions to adjust the baseplate's vertical position.
• Rod Accessory Adjustment: Loosen the locking screws on your 15mm rod accessories to slide them along the rods for optimal positioning, then re-tighten.

4. ጥገና

Proper maintenance ensures the longevity and reliable performance of your SmallRig baseplate.

• ማጽዳት፡ Use a soft, dry cloth to wipe down the baseplate after use. For stubborn dirt, a slightly damp ጨርቅ መጠቀም ይቻላል, ከዚያም ወዲያውኑ ማድረቅ. ኃይለኛ ኬሚካሎችን ወይም ገላጭ ቁሳቁሶችን ያስወግዱ.
• ማከማቻ፡ Store the baseplate in a clean, dry environment, away from extreme temperatures and humidity.
• ምርመራ፡- Periodically inspect all screws, knobs, and moving parts for tightness and wear. Use the provided hex spanners to tighten any loose screws.
• ቅባት፡ No lubrication is typically required for this product. If any moving parts feel stiff, contact support.

5. መላ መፈለግ

If you encounter issues with your SmallRig Universal Bottom Mount Plate, consider the following:

• ካሜራ ደህንነቱ ያልተጠበቀ፡
  • Ensure the QR plate is properly attached to your camera/cage and the screw is tight.
  • Verify the knob screw on the baseplate's QR receiver is fully tightened after dropping the QR plate in.
• Rods Not Holding Firmly:
  • Check that the 15mm rods are fully inserted into the clamps.
  • Confirm the locking screws on the rod clampዎች ተጣብቀዋል።
• Height Adjustment Issues:
  • Ensure the wingnut for height adjustment is sufficiently loosened before attempting to adjust.
  • Tighten the wingnut firmly after adjustment to prevent slippage.
• አጠቃላይ አለመረጋጋት፡
  • Double-check all connection points, including camera, cage, QR plate, baseplate, and tripod connections, for tightness.
  • Ensure all components are correctly aligned and seated.

6. ዝርዝሮች

7. የዋስትና መረጃ

This SmallRig product comes with a የ1-ዓመት ዋስትና from the date of purchase. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official SmallRig webጣቢያ ወይም የደንበኛ ድጋፍን ያነጋግሩ።

8. ድጋፍ እና ግንኙነት

For technical assistance, product inquiries, or warranty support, please contact the manufacturer or authorized distributors.

• አምራች፡ SHENZHEN LEQI CO LTD, 4th Floor Building 12, Asian Industrial Park Bantian Shenzhen, China.
• አስመጪ (ህንድ)፦ Shetala Agencies Pvt Ltd, 27, 5th Street, Bharathi Ave, Kaveri Nagar, Kottivakkam, Chennai, Tamil Nadu 600041.
• Packer (India): Shetala Agencies Pvt Ltd, 27, 5th Street, Bharathi Ave, Kaveri Nagar, Kottivakkam, Chennai, Tamil Nadu 600041.
• SmallRig Official Webጣቢያ፡ www.smallrig.com