1. መግቢያ
Thank you for choosing the LEPOTEC 30-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting product. Please read this manual thoroughly before use and retain it for future reference.
የጥቅል ይዘቶች፡-
- LEPOTEC 30-LED Motion Sensor Cabinet Light (2 units)
- የዩኤስቢ ባትሪ መሙያ ገመድ
- Adhesive Magnetic Strips
- የተጠቃሚ መመሪያ
2. የምርት ባህሪዎች
- የላቀ የ LED ቴክኖሎጂ; Features 30 side-emitting LED lamp beads for bright (up to 200 lumens) yet soft, non-glare illumination. Constructed from durable aluminum alloy.
- ቀላል መጫኛ; Built-in magnet allows direct attachment to iron surfaces. For non-iron surfaces, use the included adhesive tape and metal sheet for secure mounting. Lights can be easily removed for charging or relocation.
- ሶስት የስራ ሁነታዎች; Equipped with a 3-mode switch (ON-OFF-G) for continuous illumination, off, or motion sensor mode.
- ዩኤስቢ ዳግም ሊሞላ የሚችል፡ Integrated 1000mAh high-capacity rechargeable battery, easily charged via the included USB cable. Offers approximately 3 hours of continuous light or 2-4 weeks in motion sensor mode (based on 10 activations per day) on a full charge.
- ሰፊ መተግበሪያ፡ Suitable for various indoor locations such as closets, cabinets, corridors, workshops, basements, garages, and stairwells.
Image: Two LEPOTEC 30-LED Motion Sensor Cabinet Lights, illustrating the product design.
3. ማዋቀር እና መጫን
The LEPOTEC cabinet light offers flexible installation options due to its magnetic design.
የመጫኛ ደረጃዎች
- ቀጥተኛ መግነጢሳዊ አባሪ፡ If installing on an iron surface (e.g., refrigerator, metal cabinet), simply place the light directly onto the surface. The built-in magnet will secure it.
- Adhesive Magnetic Strip Installation (for non-iron surfaces):
- Clean the desired installation surface to ensure it is dry and free of dust or grease.
- Peel off the protective film from one side of the adhesive tape and attach it to the metal plate.
- Peel off the protective film from the other side of the adhesive tape and firmly press the metal plate onto the cleaned surface.
- Attach the LEPOTEC cabinet light to the metal plate. The light will magnetically adhere to the plate.
Image: Illustration of the built-in magnet for direct attachment and the adhesive magnetic strip method for non-metal surfaces.
4. የአሠራር መመሪያዎች
The LEPOTEC cabinet light features a versatile 3-mode switch and motion sensing capabilities.
ሁነታ ምርጫ፡-
Locate the switch on the side of the light bar. Slide the switch to select one of the following modes:
- በርቷል ብርሃኑ ያለማቋረጥ እንደበራ ይቆያል።
- ጠፍቷል መብራቱ ይጠፋል.
- ጂ (የእንቅስቃሴ ዳሳሽ ሁነታ): In a dark environment, the light will automatically detect human motion within a 10ft/120° range. It will turn on when motion is detected and automatically turn off after 20 seconds of no movement. The motion sensor is designed to activate only in low-light conditions to conserve battery life.
ምስል፡ ዝርዝር view of the 3-mode switch (G, OFF, ON) and the Type-C charging port.
Image: Explanation of the auto-induction condition, showing the motion sensor activates only in low light (night) and not in bright light (daytime).
5. ጥገና
ባትሪ መሙላት;
The light is equipped with a built-in rechargeable battery. When the battery is low, the light output may diminish. To charge:
- Connect the included USB charging cable to the Type-C charging port on the light bar.
- የዩኤስቢ ገመድ ሌላኛውን ጫፍ ወደ መደበኛ የዩኤስቢ ኃይል አስማሚ (ያልተካተተ) ወይም የኮምፒተር ዩኤስቢ ወደብ ያገናኙ።
- የኃይል መሙያ አመልካች መብራቱ በሚሞላበት ጊዜ ቀይ ያበራል።
- ሙሉ በሙሉ ከተሞላ በኋላ (በግምት 3 ሰዓታት)፣ የአመላካች መብራቱ ወደ አረንጓዴ ይለወጣል።
- የኃይል መሙያ ገመድ ያላቅቁ።
Image: Visual representation of the 1000mAh battery, quick charge capability, and charging status indicators (red for charging, green for fully charged).
ማጽዳት፡
To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.
6. መላ መፈለግ
If you encounter issues with your LEPOTEC cabinet light, please refer to the following common problems and solutions:
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| Light does not turn on in 'G' (Motion Sensor) mode. | Insufficient darkness; battery low; sensor obstructed. | Ensure the environment is dark enough for the sensor to activate. Charge the battery. Check if the sensor is clean and unobstructed. |
| Light stays on continuously in 'G' mode or flickers. | Constant motion detected; sensor malfunction; switch issue. | Ensure no continuous motion is within the sensor's range. Try switching to 'OFF' and then back to 'G' mode. If the issue persists, contact customer support. |
| ብርሃን አይከፍልም. | Faulty cable; power source issue; charging port damage. | የተለየ የዩኤስቢ ገመድ እና የኃይል አስማሚ ይሞክሩ። የኃይል መሙያ ወደቡ ንጹህ እና ያልተበላሸ መሆኑን ያረጋግጡ። |
| የባትሪ ዕድሜ ከሚጠበቀው በታች ነው። | Frequent activation; continuous 'ON' mode usage. | Battery life varies with usage frequency. Reduce activations in 'G' mode or use 'OFF' mode when not needed. Ensure the light is fully charged. |
7. ዝርዝሮች
| ባህሪ | ዝርዝር |
|---|---|
| የምርት ስም | LEPOTEC |
| የሞዴል ቁጥር | TL030-2 |
| የብርሃን ምንጭ | 30 LED ዶቃዎች |
| ፈካ ያለ ቀለም | ነጭ ብርሃን |
| ብሩህነት | 200 Lumens |
| ዋትtage | 2 ዋት |
| ጥራዝtage | 3.7 ቮልት |
| የባትሪ አቅም | 1000mAh ሊቲየም ፖሊመር |
| የኃይል መሙያ ጊዜ | በግምት. 3 ሰዓታት |
| የእንቅስቃሴ ዳሳሽ ክልል | 10 ጫማ/120° |
| ራስ-ማጥፋት ጊዜ | 20 seconds (after no motion in 'G' mode) |
| ቁሳቁስ | አሉሚኒየም, ብረት |
| የምርት ልኬቶች | 8.2"L x 3.5"W x 0.6"H (7.8 inch length for the light bar itself) |
| የእቃው ክብደት | 9.12 አውንስ |
| የመጫኛ ዓይነት | Magnetic, Adhesive Mount |
| የቤት ውስጥ / የውጭ አጠቃቀም | የቤት ውስጥ |
8. ዋስትና እና ድጋፍ
LEPOTEC is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LEPOTEC 30-LED Motion Sensor Cabinet Light, please contact our customer service team.
እባክዎ የግዢ ሰነድዎን ወይም የችርቻሮውን ይመልከቱ webጣቢያ ለተወሰኑ የዋስትና ዝርዝሮች እና የእውቂያ መረጃ።