LEPOTEC L54-2-warm

LEPOTEC 54-LED Motion Sensor Cabinet Light

Model: L54-2-warm

Wireless USB Rechargeable Under-Cabinet Lighting

መግቢያ

Thank you for choosing the LEPOTEC 54-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting solution. Please read this manual thoroughly before use and retain it for future reference.

የጥቅል ይዘቶች

  • 2 x LEPOTEC 54-LED Motion Sensor Cabinet Lights
  • 2 x Iron Sheets (for magnetic mounting)
  • 1 x የዩኤስቢ ባትሪ መሙያ ገመድ
  • 2 x ተለጣፊ ቴፖች
  • 1 x የተጠቃሚ መመሪያ

ምርት አልቋልview

The LEPOTEC 54-LED Motion Sensor Cabinet Light features 54 lamp beads for bright, soft, and non-glare illumination. Constructed from aluminum alloy, it boasts a slim profile and versatile functionality.

LEPOTEC 54-LED Motion Sensor Cabinet Light with dimensions and charging details
ምስል፡ አልቋልview of the LEPOTEC 54-LED Motion Sensor Cabinet Light, showing its dimensions (12.5"L x 1.6"W x 0.4"H), 2500mAh battery capacity, quick charge capability (fully charged in 3 hours), and charging status indicators (red for charging, green for fully charged). It also highlights that it's rechargeable, eliminating the need for frequent battery exchange.

መጫን

The light features a built-in magnet for easy attachment and removal. Follow these steps for installation:

  1. መግነጢሳዊ አባሪ፡ The light has a built-in magnet. It can be directly absorbed onto any ironwork surface.
  2. ተለጣፊ መጫኛ; For non-iron surfaces, use the included adhesive tape to attach the iron sheet to your desired location. Once the iron sheet is secured, the light can be magnetically attached to it.
  3. ማስወገድ፡ When charging or relocating, simply detach the light from the magnetic strip or ironwork.
Installation steps for the LEPOTEC Motion Sensor Cabinet Light
ምስል፡ Step-by-step guide illustrating the installation process. It shows attaching the iron piece to the desired surface using adhesive tape, then magnetically securing the light to the iron piece. This method allows for easy removal for charging or repositioning.

የክወና ሁነታዎች

The light features a 3-mode switch (On-Off-G) to adjust its operation:

  • ሁነታ ላይ መብራቱ ያለማቋረጥ እንደበራ ይቆያል።
  • የጠፋ ሁነታ ፦ መብራቱ ጠፍቷል።
  • G (Motion Sensor) Mode: In dark environments, the light automatically senses human motion within a 10ft/120° range and turns off after 20 seconds of no movement.
LEPOTEC Motion Sensor Cabinet Light 3-mode switch
ምስል፡ Close-up of the light's control panel, highlighting the Type-C charging port, charging indicator, and the 3-mode switch (G, OFF, ON) for motion sensing, no light, and continuously lighting modes.

Motion Sensor Conditions

Under G (Motion Sensor) Mode, the sensor is only activated in low-light conditions. It will not turn on if sufficient ambient light is detected.

Auto-induction condition for LEPOTEC Motion Sensor Cabinet Light
ምስል፡ Illustration of the auto-induction condition. In a bright light environment (daytime), the inductor will not be triggered, and the light will remain off. In a low light environment (night), it turns on automatically if motion is sensed within a 10ft/120° range and extinguishes after 20 seconds of no movement.

በመሙላት ላይ

The light features a built-in 2500mAh high-capacity rechargeable battery. It is easily charged via the included USB cable.

  • የኃይል መሙያ ጊዜ: ለሙሉ ክፍያ በግምት 3 ሰዓታት።
  • የባትሪ ህይወት፡ About 3 hours in ON mode, and 2-4 weeks in G (Motion Sensor) mode (activating 10 times a day).
  • የኃይል መሙያ አመልካች፡- A red light indicates charging, and a green light indicates a full charge.

የአጠቃቀም ሁኔታዎች

This versatile light can be used in various indoor locations to provide convenient illumination:

Various usage scenarios for LEPOTEC Motion Sensor Cabinet Light
ምስል፡ Examples of where the light can be used, including handheld, in a car trunk, on stairs, and in a children's room. Icons also suggest use in children's rooms, washrooms, kitchens, cupboards, stairs, car trunks, garages, and outdoors.

መላ መፈለግ

  • Light not turning on in G Mode: Ensure the environment is dark enough. The sensor will not activate if sufficient ambient light is detected.
  • Interference between lights: Do not place two motion-activated LED night lights too close to each other, as they can interact and cause one or both products to malfunction.

ዝርዝሮች

ባህሪዝርዝር
የምርት ስምLEPOTEC
የሞዴል ቁጥርL54-2-warm
ቀለምSilver-warm White Light
ቁሳቁስአሉሚኒየም
የምርት ልኬቶች12.5"ኤል x 1.6" ዋ x 0.4" ኤች
የኃይል ምንጭበባትሪ የተጎላበተ (USB ዳግም ሊሞላ የሚችል)
የባትሪ ዓይነትሊቲየም ፖሊመር (2500 ሚአሰ)
የብርሃን ምንጭ ዓይነትLED (54 lamp ዶቃዎች)
ብሩህነት300 Lumens
የቀለም ሙቀት3500 Kelvin (Warm White Light)
ልዩ ባህሪየእንቅስቃሴ ዳሳሽ
የመጫኛ ዓይነትSurface Mount (Magnetic/Adhesive)
የቤት ውስጥ / የውጭ አጠቃቀምየቤት ውስጥ
የእቃው ክብደት13.3 አውንስ

የደንበኛ ድጋፍ

For any questions, concerns, or technical assistance, please refer to the contact information provided with your purchase or visit the official LEPOTEC webጣቢያ.

© 2023 LEPOTEC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.