LEKATO Triple Looper Station M0-1698 Instruction Manual

መግቢያ

Thank you for choosing the LEKATO Triple Looper Station. This compact and versatile guitar effect pedal is designed to enhance your musical creativity with its synchronous recording capabilities, built-in tuner, and extensive looping features. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your device.

ቁልፍ ባህሪያት

• Synchronous Recording & Tuner Function: Enter recording mode at any time during playback to capture ideas instantly. Features a high-sensitivity built-in tuner for accurate tuning.
• የተራዘመ የቀረጻ ጊዜ፡ Three independent loop slots, each capable of storing up to 6 minutes of audio, totaling 18 minutes of recording time. Recorded fileዎች ከኃይል-ጠፍተው በኋላም ቢሆን በራስ-ሰር ይቀመጣሉ።
• Uncompressed Audio Quality: Supports 48K/24-bit sampling rate for professional, lossless, uncompressed sound quality with digital bypass design.
• Lossless Import/Export: Easily transfer WAV loop files to and from a PC via USB. No driver installation required.
• ለተጠቃሚ ምቹ የሆነ አሠራር፡- Clear looping with unlimited overdubbing. Record, Undo/Redo, Stop, and Erase functions are all accessible via a single footswitch. A single knob controls loop playback volume.

የጥቅል ይዘቶች

የጥቅሉን ይዘቶች ከሳጥኑ ሲያወጡ ያረጋግጡ። ማንኛውም እቃ ከጠፋ ወይም ከተበላሸ፣ ቸርቻሪዎን ያነጋግሩ።

• 1 x LEKATO Triple Looper Station (Guitar Effect Pedal)
• 1 x የዩኤስቢ ገመድ
• 1 x የተጠቃሚ መመሪያ

Image: Contents of the LEKATO Triple Looper Station package, showing the pedal, USB cable, and user manual.

መቆጣጠሪያዎች እና በይነገጽ

Familiarize yourself with the various controls and connections on your LEKATO Triple Looper Station.

ምስል፡ ፊት ለፊት view of the LEKATO Triple Looper Station, highlighting the level knob, LED display, and multi-function footswitch.

• LEVEL ማዞሪያ፡ የተቀረጹትን ዙሮች የመልሶ ማጫወት መጠን ያስተካክላል።
• የ LED ማሳያ Shows current loop bank (1-3), recording status (REC), playback status (PLAY), and tuner information (TUNE).
• Multi-Function Footswitch: Controls recording, playback, overdubbing, undo/redo, stop, and erase functions.
• DC 9V ግብዓት፡- Power supply connection (center negative, 9V DC, 100mA minimum).
• የዩኤስቢ ወደብ፡ For connecting to a computer to import/export WAV files.
• ማስገቢያ ጃክ፡ Connect your instrument (guitar, bass, etc.) here.
• የውጤት ጃክ ፦ ከእርስዎ ጋር ይገናኙ amplifier ወይም ሌሎች ተጽዕኖ ፔዳል.

ምስል፡ ዝርዝር view of the LEKATO Triple Looper Station's input/output jacks, power input, and USB port.

ማዋቀር

1. የኃይል ግንኙነት; Connect a 9V DC center-negative power adapter (not included) to the DC 9V input jack. Ensure the power supply meets the specifications (9V DC, 100mA minimum).
2. የመሳሪያ ግንኙነት; Connect your guitar or bass to the INPUT jack of the looper pedal using a standard 1/4-inch instrument cable.
3. Ampየማጣሪያ ግንኙነት; Connect the OUTPUT jack of the looper pedal to your amplifier or the input of your next effects pedal in the signal chain using a standard 1/4-inch instrument cable.
4. አብራ፡ ሁሉም ግንኙነቶች ደህንነታቸው የተጠበቀ ከሆኑ በኋላ፣ ያብሩት amplifier and then the looper pedal.

Image: The LEKATO Triple Looper Station integrated into a guitar pedalboard setup, showing connections to other pedals and an ampማብሰያ

የአሠራር መመሪያዎች

Selecting Loop Tracks

The looper has three independent loop tracks (1, 2, 3).

• አንዴ ይጫኑ፡- Briefly press the footswitch once to cycle through the available loop tracks (1, 2, 3). The LED display will indicate the currently selected track.

Image: Diagram illustrating the multi-function footswitch operations: single press to select tracks, hold for 1 second to enter synchronous recording mode, and hold for 3 seconds to enter tuning mode.

Recording a Loop

1. Select an empty loop track (or one you wish to overwrite) by pressing the footswitch once.
2. Press the footswitch once to start recording. The LED display will show "REC".
3. Press the footswitch once again to stop recording and immediately start playback of the recorded loop. The LED display will show "PLAY".

ከመጠን በላይ መደበቅ

While a loop is playing, press the footswitch once to enter overdub mode. The LED display will show "OVERDUB". Play your new part, and it will be added to the existing loop. Press the footswitch once again to stop overdubbing and continue playback. You can overdub multiple times.

ቀልብስ/ድገም

• ቀልብስ While a loop is playing, press and hold the footswitch for approximately 1 second to undo the last recorded overdub.
• ድገም After performing an undo, press and hold the footswitch for approximately 1 second again to redo the undone overdub.

Stop and Erase

• መልሶ ማጫዎትን አቁም While a loop is playing, double-press the footswitch quickly to stop playback.
• Erase Current Loop: While playback is stopped, press and hold the footswitch for approximately 3 seconds to erase the current loop. The LED display will flash to confirm deletion.
• Erase All Loops: To erase all three loops, power off the device, then press and hold the footswitch while powering it back on. Keep holding until the display confirms all loops are erased.

ማስተካከያ ማስተካከያ

The LEKATO Triple Looper Station includes a high-sensitivity built-in tuner.

• Enter Tuner Mode: Press and hold the footswitch for approximately 3 seconds. The LED display will switch to tuner mode, showing the note and pitch deviation.
• Exit Tuner Mode: Press the footswitch once to exit tuner mode and return to the previous operating state.

Synchronous Recording Mode

This mode allows you to start recording seamlessly during playback without interruption.

• Activate Sync Record: While a loop is playing, press and hold the footswitch for approximately 1 second. The LED display will indicate "SYNC REC". You can now start playing your instrument, and the recording will begin in sync with the existing loop.
• Exit Sync Record: Press the footswitch once to stop synchronous recording and continue playback.

የድምጽ መጠን ማስተካከያ

የሚለውን ተጠቀም ደረጃ knob to adjust the playback volume of the loops. This does not affect your dry instrument signal.

Importing/Exporting Loops via USB

You can transfer WAV audio files between your looper and a computer.

1. Connect the looper pedal to your computer using the provided USB cable.
2. The looper will appear as a removable storage device.
3. You can drag and drop WAV files (48K/24-bit) to and from the looper's folders (Loop1, Loop2, Loop3).
4. Ensure to safely eject the device from your computer before disconnecting the USB cable.

Image: The LEKATO Triple Looper Station connected to a laptop, demonstrating the USB interface for importing and exporting lossless WAV files.

ጥገና

• ማጽዳት፡ ፔዳሉን ለማጽዳት ለስላሳ እና ደረቅ ጨርቅ ይጠቀሙ. ገላጭ ማጽጃዎችን ወይም ፈሳሾችን አይጠቀሙ.
• ማከማቻ፡ Store the pedal in a dry environment, away from direct sunlight and extreme temperatures.
• የኃይል አቅርቦት; Always use a compatible 9V DC center-negative power supply to prevent damage.
• ግንኙነቶች፡ ሁሉንም የኬብል ግንኙነቶች በየጊዜው ይፈትሹ እና ይበላሹ።

መላ መፈለግ

ዝርዝሮች

ዋስትና እና ድጋፍ

The LEKATO Triple Looper Station comes with a የ 1 ዓመት ዋስትና from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper power supply.

For technical support, warranty claims, or any questions regarding your product, please contact LEKATO customer service through the retailer where you purchased the product or visit the official LEKATO website for contact information. Please have your purchase receipt and model number (M0-1698) ready when contacting support.