የሆኮ CA104 ቴሌስኮፒክ የስበት መኪና ስልክ መያዣ የተጠቃሚ መመሪያ

1. መግቢያ

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hoco CA104 Telescopic Gravity Car Phone Holder. Please read this manual carefully before use to ensure proper functionality and safety.

Image 1.1: The Hoco CA104 car phone holder with a smartphone securely held in place, demonstrating its gravity linkage mechanism and adjustable arm.

2. የምርት ክፍሎች

The Hoco CA104 holder consists of the following main parts:

• Gravity Linkage Clamp: Automatically adjusts to hold the phone when inserted.
• ቴሌስኮፒክ ክንድ; Allows for extension and retraction to adjust distance.
• Adjustable Ball Joint: Enables 360-degree rotation and angle adjustment of the phone.
• የመጠጫ ዋንጫ መሠረት; Provides secure attachment to flat surfaces like dashboards or windshields.
• የመቆለፊያ ሊቨር፦ Activates the suction cup for firm adhesion.

ምስል 2.1፡ View of the Hoco CA104 holder, highlighting the suction cup base and the adjustable telescopic arm before phone insertion.

3. የመጫኛ መመሪያዎች

The Hoco CA104 can be installed on either the car dashboard or windshield.

3.1 Dashboard Installation

1. ወለሉን አጽዳ; Ensure the dashboard surface is clean and dry.
2. መያዣውን ያስቀምጡ; Place the suction cup base on the desired flat area of your dashboard.
3. የመጠጫ ዋንጫውን ደህንነት ይጠብቁ፡ Press down firmly on the suction cup while pushing the locking lever downwards to create a vacuum seal.
4. አስተካክል አንግል፡ Use the telescopic arm and ball joint to adjust the holder to your preferred viewing angle. Tighten any adjustment knobs to secure the position.

Image 3.1: The Hoco CA104 holder securely mounted on a car dashboard, providing a stable platform for a smartphone running a navigation application.

3.2 Windshield Installation

1. ወለሉን አጽዳ; Ensure the windshield surface is clean and dry.
2. መያዣውን ያስቀምጡ; Place the suction cup base on the desired area of your windshield.
3. የመጠጫ ዋንጫውን ደህንነት ይጠብቁ፡ Press down firmly on the suction cup while pushing the locking lever downwards to create a vacuum seal.
4. አስተካክል አንግል፡ Use the telescopic arm and ball joint to adjust the holder to your preferred viewing angle. Tighten any adjustment knobs to secure the position.

Image 3.2: The Hoco CA104 holder mounted on a car windshield, offering an alternative placement for optimal viewing of a smartphone's display.

4. የአሠራር መመሪያዎች

4.1 ስልክዎን ማስገባት

1. Ensure the gravity linkage arms are open.
2. Place your phone into the bottom support arms of the holder.
3. As the phone's weight presses down, the side arms will automatically close and secure the phone.

Image 4.1: The Hoco CA104 holder with its gravity linkage arms in the open position, illustrating the mechanism before a phone is placed inside.

4.2 ስልክዎን ማስወገድ

1. Gently lift your phone upwards from the holder.
2. The gravity linkage arms will automatically release and open, allowing you to remove the phone.

4.3 ማስተካከል Viewማእዘን

• Loosen the knob on the ball joint to adjust the phone's angle (horizontal or vertical) and rotation.
• Loosen the knob on the telescopic arm to extend or retract the arm for optimal distance.
• Tighten all knobs after adjustment to secure the holder's position.

5. እንክብካቤ እና ጥገና

• ማጽዳት፡ መያዣውን ለስላሳ, መamp ጨርቅ. ገላጭ ማጽጃዎችን ወይም ፈሳሾችን አይጠቀሙ.
• የመጠጫ ዋንጫ If the suction cup loses adhesion, rinse it with warm water and let it air dry. This can restore its stickiness.
• ማከማቻ፡ When not in use for extended periods, detach the holder and store it in a cool, dry place away from direct sunlight.
• የሙቀት መጠን፡ Avoid exposing the holder to extreme temperatures, as this may affect the material integrity.

6. መላ መፈለግ

7. የምርት ዝርዝሮች

• ሞዴል፡ CA104
• ቁሳቁስ፡ ኤቢኤስ ፣ ሲሊኮን
• Surface Technology: Sun pattern oil spray
• መጠኖች፡- 100 x 95 x 170 ሚ.ሜ
• ክብደት፡ 151 ግ
• ተስማሚ የስልክ መጠን: 4.5-7.0 ኢንች
• Clamp ክልል፡ 60 - 85 ሚሜ
• የሚመለከታቸው ትዕይንቶች፡- Car dashboard, windshield
• ልዩ ባህሪያት፡ Telescopic arm, vertical and horizontal adjustment, gravity linkage