TECKNET Wireless Doorbell (Model B0BZVDJHCS) Instruction Manual

1. መግቢያ

Thank you for choosing the TECKNET Wireless Doorbell. This manual provides detailed instructions for the installation, operation, and maintenance of your new doorbell system. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

2. የጥቅል ይዘቶች

Please check the package contents carefully. If any items are missing or damaged, please contact TECKNET customer support.

• 1 x Wireless Doorbell Receiver
• 1 x ገመድ አልባ የበር ደወል አስተላላፊ (የግፊት ቁልፍ)
• Mounting Hardware (Screws, Wall Anchors, Adhesive Tape)
• 1 x የተጠቃሚ መመሪያ (ይህ ሰነድ)

3. የምርት ባህሪዎች

The TECKNET Wireless Doorbell offers a range of features designed for convenience and reliability:

• 60 Selectable Melodies: Choose from a wide variety of chimes.
• 5 የሚስተካከሉ የድምጽ ደረጃዎች፡- Ranging from 0dB (silent with LED flash) to 90dB.
• IP65 የውሃ መከላከያ ማስተላለፊያ; የተለያዩ የውጪ የአየር ሁኔታዎችን ለመቋቋም የተነደፈ።
• 400M (1300ft) Operating Range: Ensures reliable signal transmission across large homes or properties.
• የ LED ፍላሽ አመልካች፡- Visual alert for visitors, especially useful in noisy environments or for hearing-impaired individuals.

Image: Features of the TECKNET Wireless Doorbell receiver, highlighting melody and volume options.

Image: The doorbell transmitter's IP65 waterproof rating and wide operating temperature range.

4. ማዋቀር እና መጫን

Follow these steps to set up your TECKNET Wireless Doorbell system.

4.1 አስተላላፊ ባትሪ መጫን

1. Locate the small notch on the side or bottom of the transmitter.
2. Use a small flat-head screwdriver to gently pry open the back cover of the transmitter.
3. Insert the CR2032 lithium coin cell battery (included or purchased separately) into the battery compartment, ensuring the positive (+) side faces up.
4. የጀርባውን ሽፋን በጥንቃቄ ይዝጉ.

ማስታወሻ፡- The transmitter typically uses a CR2032 battery. Please refer to the packaging for specific battery requirements.

4.2 የመቀበያ አቀማመጥ

Plug the receiver into a standard electrical outlet in a central location within your home. Ensure it is within the operating range of the transmitter and not obstructed by large metal objects or thick walls, which can reduce signal strength.

4.3 ማስተላለፊያ መጫኛ

There are two primary methods for mounting the transmitter:

Image: Steps for battery installation and two mounting methods for the transmitter.

Method 1: Screw Mounting

1. Mark the desired mounting location on your wall or door frame.
2. Drill two small holes at the marked spots.
3. Insert the wall anchors (if necessary for your surface).
4. Align the transmitter's back plate with the holes and secure it with the provided screws.
5. Attach the transmitter unit to the back plate.

Method 2: Adhesive Mounting

1. Clean the mounting surface thoroughly to ensure it is dry and free of dust or grease.
2. Peel off one side of the protective film from the adhesive tape.
3. Attach the adhesive tape to the back of the transmitter.
4. Peel off the other side of the protective film.
5. Firmly press the transmitter onto the desired mounting surface for at least 30 seconds.

ምክር፡- For best results and long-term stability, screw mounting is recommended, especially for outdoor use.

5. የአሠራር መመሪያዎች

5.1 ዜማዎችን መቀየር

To change the melody on your receiver:

1. Press the "Melody Selection" button (often indicated by a music note icon) on the receiver.
2. Each press will cycle through the available 60 melodies.
3. Stop pressing when you hear your desired melody. The receiver will automatically save the selection.

5.2 የድምጽ መጠን ማስተካከል

የድምጽ ደረጃውን ለማስተካከል፡-

1. Press the "Volume Control" button (often indicated by a speaker icon) on the receiver.
2. Each press will cycle through the 5 available volume levels (including silent mode).
3. Select the volume level that suits your preference.

5.3 Pairing (If Needed)

Your doorbell system usually comes pre-paired. If the transmitter and receiver lose connection or if you add additional transmitters/receivers, follow these steps to pair them:

1. መቀበያውን ይሰኩት.
2. Press and hold the "Volume Control" button on the receiver for approximately 5 seconds until you hear a "ding" sound or the LED indicator flashes rapidly. This indicates pairing mode.
3. Immediately press the transmitter (push button) once.
4. You should hear the selected melody, confirming successful pairing.
5. If pairing fails, unplug the receiver and repeat the process.

6. ጥገና

• ማጽዳት፡ የበር ደወሉን ክፍሎች ለስላሳና ደረቅ ጨርቅ ይጥረጉ። የማጽጃ ማጽጃዎችን ወይም ማሟሟቶችን አይጠቀሙ።
• የባትሪ መተካት፡ When the transmitter's LED indicator no longer lights up or the range decreases significantly, it's time to replace the CR2032 battery. Follow the battery installation steps in Section 4.1.
• የአካባቢ ሁኔታዎች; While the transmitter is IP65 waterproof, extreme temperatures or prolonged direct exposure to harsh weather conditions may affect its lifespan.

7. መላ መፈለግ

8. ዝርዝሮች

9. ዋስትና እና ድጋፍ

TECKNET products come with a standard warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official TECKNET website. If you encounter any issues or have questions regarding your doorbell, please contact TECKNET customer support:

• Webጣቢያ፡ www.tecknet.co.uk (ወይም ተዛማጅ ክልላዊ webጣቢያ)
• ኢሜይል፡- የምርት ማሸጊያዎን ወይም webየእውቂያ ኢሜይል ጣቢያ.

Please have your model number (B0BZVDJHCS) and purchase date ready when contacting support.