Intelbras GX 3000 Wireless Mesh Router User Manual

1. መግቢያ

The Intelbras GX 3000 is a multifunction wireless mesh router designed to provide high-speed internet connectivity via 5G/4G networks and Wi-Fi 6. This device integrates advanced Qualcomm technology for both its 5G modem and Wi-Fi 6 solution, ensuring high performance and reliability. It supports up to 128 devices simultaneously on the Wi-Fi network and offers wired connectivity options. The GX 3000 is suitable for various environments, from home to office, providing robust network performance.

This manual provides instructions for setting up, operating, and maintaining your Intelbras GX 3000 router. Please read it carefully before use.

2. Package Contents & Device Overview

2.1. የጥቅል ይዘቶች

• Intelbras GX 3000 Wireless Mesh Router
• የኃይል አስማሚ
• የአውታረ መረብ ገመድ
• ፈጣን ጅምር መመሪያ (በዚህ መመሪያ ውስጥ አልተካተተም)

2.2. መሣሪያ አብቅቷልview

ምስል 1: የፊት View of the GX 3000 Router

This image displays the front of the Intelbras GX 3000 router, showing its sleek white design and LED indicators for 5G, 4G, call status, Wi-Fi, and WPS button.

Figure 2: GX 3000 Router with Highlighted Indicators and Ports

This image provides a closer look at the router, emphasizing the LED indicators on the front (5G, 4G, Call, Wi-Fi, WPS) and the various ports located on the rear panel, including LAN, WAN, and TEL ports.

2.2.1. የኋላ ፓነል ወደቦች

Figure 3: Rear Panel of the GX 3000 Router

This image shows the rear panel of the router, clearly displaying the LAN, WAN, and TEL ports for wired connections.

• የ LAN ወደቦች: For connecting wired devices such as computers, smart TVs, or gaming consoles.
• የ WAN ወደብ; For connecting to an external modem or internet source (if not using 5G/4G).
• ቴል ወደብ፡ For voice services (if supported by your service provider).
• የኃይል ግቤት፡ ከተካተተ የኃይል አስማሚ ጋር ይገናኛል።

2.2.2. Bottom Panel Features

Figure 4: Bottom Panel Features of the GX 3000 Router

This diagram illustrates the bottom panel of the router, highlighting the TEST port, RESET button, and SIM CARD slot.

• TEST Port: ለምርመራ ዓላማዎች።
• ዳግም አስጀምር አዝራር፡- Used to restore factory default settings. Press and hold for 10 seconds while the device is powered on.
• SIM CARD Slot: Insert your 5G/4G SIM card here for mobile broadband connectivity.

3. ማዋቀር

3.1. የመጀመሪያ አቀማመጥ

Place the router in a central location within your desired coverage area, away from obstructions, metal objects, and other electronic devices that may cause interference. Ensure good ventilation around the device.

3.2. ሲም ካርዱን ማስገባት

1. ራውተር መጥፋቱን ያረጋግጡ።
2. Locate the SIM CARD slot on the bottom panel of the router (refer to Figure 4).
3. Insert your activated 5G/4G SIM card into the slot with the gold contacts facing down and the notched corner oriented correctly. Push until it clicks into place.
4. To remove, gently push the SIM card in again until it springs out.

3.3. የማገናኘት ኃይል

1. Connect one end of the power adapter to the Power Input port on the rear of the router.
2. የኃይል አስማሚውን ሌላኛውን ጫፍ ወደ መደበኛ የኤሌክትሪክ ሶኬት ይሰኩት።
3. The router will power on automatically. Wait for the LED indicators to stabilize.

3.4. Wired Connections (Optional)

If you wish to connect devices via Ethernet:

1. Connect one end of the provided network cable to a LAN port on the rear of the router.
2. Connect the other end of the network cable to the Ethernet port of your computer, smart TV, or other wired device.

3.5. የመጀመሪያ የዋይፋይ ግንኙነት

The default Wi-Fi network name (SSID) and password are usually printed on a label on the bottom of the router. Follow these steps to connect:

1. On your wireless device (smartphone, laptop, tablet), open the Wi-Fi settings.
2. Scan for available networks and select the SSID corresponding to your GX 3000 router.
3. Enter the default Wi-Fi password when prompted.
4. አንዴ ከተገናኙ በኋላ ወደ ራውተር መድረስ ይችላሉ። web interface to customize settings.

4. የአሠራር መመሪያዎች

4.1. የ LED አመልካቾች

የፊት ፓነል LEDs የሁኔታ መረጃ ይሰጣሉ፡-

• 5ጂ LED: የ5ጂ ኔትወርክ ሁኔታን ያመለክታል።
• 4ጂ LED: የ4ጂ ኔትወርክ ሁኔታን ያመለክታል።
• ኤልኢዲ ይደውሉ፦ Indicates voice service status.
• ዋይ ፋይ LED፡ የWi-Fi አውታረ መረብ እንቅስቃሴን ያሳያል።
• WPS LED: የWPS ተግባር ሁኔታን ያሳያል።

Refer to the full user manual (if provided separately) for detailed LED behavior (e.g., solid, blinking, color) and their meanings.

4.2. ወደ ላይ መድረስ Web የአስተዳደር በይነገጽ

To configure advanced settings, manage your network, or change Wi-Fi credentials, access the router's web በይነገጽ፡

1. Ensure your device is connected to the GX 3000's Wi-Fi network or via an Ethernet cable.
2. ክፈት ሀ web አሳሽ (ለምሳሌ Chrome፣ Firefox፣ Edge)።
3. በአድራሻ አሞሌው ውስጥ የራውተሩን ነባሪ የአይፒ አድራሻ ያስገቡ (በተለምዶ 192.168.1.1 or 192.168.0.1) and press Enter. This information is usually on the label on the bottom of the router.
4. Enter the default username and password (also found on the router label).
5. You will now be in the router's management interface, where you can customize settings such as Wi-Fi name, password, security protocols, and more.

4.3. Wi-Fi Protected Setup (WPS)

WPS allows you to connect Wi-Fi devices without entering the password manually:

1. Press the WPS button on the front of the GX 3000 router (refer to Figure 1). The WPS LED will start blinking.
2. Within two minutes, press the WPS button on your client device (e.g., Wi-Fi adapter, printer).
3. መሳሪያዎቹ በራስ-ሰር ይገናኛሉ.

Note: WPS is a convenient feature but may be less secure than manual password entry.

4.4. Mesh Network Expansion

The GX 3000 supports mesh networking to expand Wi-Fi coverage. You can add other compatible Intelbras Qi5 line products to create a seamless mesh network. Each additional Wi-Fi 6 router can extend coverage by up to 300 m². It is recommended to use up to 6 routers in the same mesh network for optimal performance.

Refer to the specific instructions provided with additional mesh units for pairing and configuration.

5. ጥገና

5.1. መሣሪያውን ማጽዳት

• Ensure the router is powered off and unplugged before cleaning.
• የመሳሪያውን ውጫዊ ክፍል ለማጽዳት ለስላሳ እና ደረቅ ጨርቅ ይጠቀሙ.
• Do not use liquid cleaners, aerosols, or solvents, as they may damage the casing ወይም የውስጥ አካላት.
• የአየር ማናፈሻ ክፍተቶችን ከአቧራ እና ፍርስራሹ ያጽዱ።

5.2. የጽኑ ዝማኔዎች

Periodically check the Intelbras official website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the instructions provided with the firmware update package carefully.

5.3. ወደ ፋብሪካ ነባሪዎች ዳግም በማስጀመር ላይ

If you encounter persistent issues or forget your login credentials, you can reset the router to its factory default settings:

1. With the router powered on, locate the RESET button on the bottom panel (refer to Figure 4).
2. የወረቀት ክሊፕ ወይም ተመሳሳይ የሆነ የጠቆመ ነገር በመጠቀም፣ የRESET አዝራሩን ተጭነው ለ10 ሰከንዶች ያህል ይቆዩ።
3. Release the button. The router will restart with all settings restored to their original factory defaults.
4. You will need to reconfigure your Wi-Fi settings and any other custom configurations after a factory reset.

6. መላ መፈለግ

7. ዝርዝሮች

8. ዋስትና እና ድጋፍ

8.1. የዋስትና መረጃ

Intelbras products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Intelbras webጣቢያ. ለዋስትና ጥያቄዎች የግዢ ማረጋገጫዎን ያስቀምጡ።

8.2. የቴክኒክ ድጋፍ

If you require technical assistance or have questions not covered in this manual, please contact Intelbras customer support. You can find contact information (phone numbers, email, support portal) on the official Intelbras webጣቢያ፡

Intelbras Official Webጣቢያ፡ www.intelbras.com.br

When contacting support, please have your product model (GX 3000) and serial number ready.