1. መግቢያ
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your EVURU XTM024 3 Phase 4 Wire Digital Energy Meter. Please read this manual thoroughly before installation and keep it for future reference. This device is designed to accurately measure active energy consumption in three-phase four-wire AC power networks.
2. የደህንነት መረጃ
- Installation and maintenance must be performed by qualified electricians only.
- Ensure the power supply is completely disconnected before any installation, wiring, or maintenance procedures.
- ጥራዝ መሆኑን ያረጋግጡtage and current ratings of the meter match the electrical system specifications.
- Do not operate the meter in environments exceeding its specified operating temperature and humidity ranges.
- Avoid exposing the meter to direct sunlight, rain, or excessive dust.
- Do not disassemble or modify the meter. Doing so will void the warranty and may lead to electric shock or fire.
3. ምርት አብቅቷልview
The EVURU XTM024 is a digital energy meter designed for precise measurement of electrical energy. It features a clear LCD display and is suitable for DIN rail mounting.
ምስል 3.1፡ በአጠቃላይ view of the EVURU XTM024 Digital Energy Meter, showing both the front display and the side profile with the DIN rail mounting mechanism.
ምስል 3.2፡ Close-up of the meter's front panel, highlighting the LCD display, phase indicators (L1, L2, L3), and pulse output LED (400imp/kWh).
ምስል 3.3፡ የኋላ view of the EVURU XTM024 Digital Energy Meter, illustrating the integrated clip for secure DIN rail mounting.
ቁልፍ ባህሪዎች
- Three-phase four-wire measurement.
- LCD 6+2 digit display for energy consumption.
- DIN rail installation.
- High accuracy level (Class 1.0).
- Pulse output for remote monitoring (400imp/kWh).
4. መጫን
The EVURU XTM024 meter is designed for DIN rail mounting. Ensure all safety precautions are followed before proceeding with installation.
4.1 መጫን
- ዋናውን የኃይል አቅርቦት ወደ መጫኛ ቦታው ያጥፉ።
- Locate a standard 35mm DIN rail within an appropriate electrical enclosure.
- Align the meter's DIN rail clip with the rail and press firmly until it clicks into place.
- Ensure the meter is securely fastened and cannot move freely.
4.2 Wiring (3 Phase 4 Wire)
Refer to the wiring diagram typically found on the meter's terminal cover or in accompanying documentation. The following is a general guide:
- Connect the three phase lines (L1, L2, L3) to their respective input terminals.
- Connect the neutral line (N) to its input terminal.
- Connect the load's three phase lines (L1, L2, L3) to their respective output terminals.
- Connect the load's neutral line (N) to its output terminal.
- ልቅ ግንኙነቶችን እና ከመጠን በላይ ሙቀትን ለመከላከል ሁሉም ግንኙነቶች ጥብቅ እና አስተማማኝ መሆናቸውን ያረጋግጡ።
- If applicable, connect the pulse output terminals to a compatible data acquisition system.
ማስታወሻ፡- Incorrect wiring can cause damage to the meter, electrical system, or pose a safety hazard. Always consult a qualified electrician for installation.
5. ኦፕሬሽን
5.1 በርቷል
Once correctly installed and wired, restore power to the circuit. The meter's LCD display should illuminate, and the phase indicator LEDs (L1, L2, L3) will light up if the corresponding phases are active.
5.2 ማሳያውን ማንበብ
- The LCD displays the total active energy consumption in kilowatt-hours (kWh). The format is typically 6 digits for integer kWh and 2 digits for decimal kWh (e.g., 000000.00 kWh).
- The pulse indicator LED (often labeled 400imp/kWh) will flash proportionally to the energy being consumed. A faster flash rate indicates higher power consumption.
- The L1, L2, L3 LEDs indicate the presence of voltage on each respective phase.
6. ጥገና
- ማጽዳት፡ ቆጣሪውን ንፁህ እና ከአቧራ የጸዳ ያድርጉት። ለማጽዳት ለስላሳ እና ደረቅ ጨርቅ ይጠቀሙ። የማጽጃ ማጽጃዎችን ወይም መሟሟቶችን አይጠቀሙ።
- ምርመራ፡- Periodically inspect the wiring connections for tightness and signs of wear or damage. Ensure the meter is securely mounted.
- አካባቢ፡ Ensure the operating environment remains within the specified temperature and humidity ranges to prolong the meter's lifespan.
No user-serviceable parts are inside the meter. For any internal issues, contact qualified service personnel.
7. መላ መፈለግ
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| No display / Meter not powering on | የኃይል አቅርቦት የለም፤ የተሳሳተ ሽቦ፤ የውስጥ ችግር። | ዋናውን የኃይል አቅርቦት ያረጋግጡ። የሽቦ ግንኙነቶችን ያረጋግጡ። ችግሩ ከቀጠለ ድጋፍ ሰጪን ያነጋግሩ። |
| Incorrect energy reading | Incorrect wiring; meter fault; external interference. | Re-check wiring against diagram. Ensure meter is correctly rated for the circuit. Contact support if readings are consistently inaccurate. |
| Pulse LED not flashing | No load connected; very low power consumption; LED fault. | Ensure there is an active load. Check if the main display is accumulating energy. |
8. ዝርዝሮች
| መለኪያ | ዋጋ |
|---|---|
| ሞዴል | XTM024 |
| ዓይነት | Three Phase Four Wire Electronic Type |
| ማጣቀሻ ጥራዝtage | 3 X 220/380V AC, 3 X 230/400V AC |
| ደረጃ የተሰጠው ጥራዝtage | AC220V/400V |
| Reference Current (Base/Max) | 3 X 5(80A), 3 X 1.5(6A), 3 X 30(100A) |
| ትክክለኛነት ደረጃ | 1.0 (IEC62053-21) |
| ደረጃ የተሰጠው ድግግሞሽ | 50Hz |
| Constant Pulse | 400imp / kWh |
| ማሳያ | LCD 6 + 2 digits |
| የኃይል ፍጆታ | 2 ዋ፣ 10 ቪ.ኤ |
| ከአሁኑ ጀምሮ | 0.004 ኢ |
| የአሠራር ሙቀት | -20 ° ሴ ~ 55 ° ሴ |
| የማከማቻ ሙቀት | -25 ° ሴ ~ 70 ° ሴ |
| ኦፕሬቲንግ ቁtage | 0.9-1.1 Rated Voltage |
| Utmost Voltage | 0.8-1.15 Rated Voltage |
| Average Humidity Value of Year | 75% |
| የእርጥበት ክልል | 20-80% |
| የመጫኛ ዘዴ | ዲን ባቡር |
| መጠኖች | Approx. 10.1 X 7.6 X 6.5cm / 3.97 X 2.99 X 2.55in |
| ክብደት | በግምት. 500 ግ |
9. ዋስትና እና ድጋፍ
For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer/manufacturer directly. Keep your purchase receipt as proof of purchase.