Lectrosonics DPR-A ዲጂታል ፕለግ ኦን ማሰራጫ የተጠቃሚ መመሪያ

1. መግቢያ

The Lectrosonics DPR-A is a state-of-the-art digital plug-on transmitter designed for professional audio applications. It offers a unique design that seamlessly integrates with any microphone or line-level source via a standard XLR connector. This manual provides detailed instructions for the proper setup, operation, and maintenance of your DPR-A transmitter.

Key features include a wide tuning range across the UHF television band, selectable output power, and robust AES 256-CTR encryption for secure transmissions. Its external antenna ensures exceptional operating range and reliability.

2. ጠቃሚ የደህንነት መረጃ

Please read and follow all safety instructions carefully to prevent damage to the device or injury to yourself.

• ክፍሉን ለውሃ ወይም ከመጠን በላይ እርጥበት አያጋልጡ.
• Avoid extreme temperatures. Operate the device within its specified temperature range.
• ክፍሉን እራስዎ ለመክፈት ወይም ለማገልገል አይሞክሩ. ሁሉንም አገልግሎቶች ብቁ ለሆኑ ባለሙያዎች ያመልክቱ።
• የተገለጹ ባትሪዎችን ብቻ ተጠቀም እና በትክክል አስወግዳቸው።
• መሳሪያውን በሚሰራበት ጊዜ ትክክለኛውን አየር ማናፈሻን ያረጋግጡ.
• ልጆች በማይደርሱበት ቦታ ያስቀምጡ.

3. የምርት ክፍሎች እና መቆጣጠሪያዎች

Familiarize yourself with the various parts and controls of your DPR-A transmitter.

ምስል 3.1፡ Lectrosonics DPR-A Digital Plug On Transmitter showing the XLR connector, control panel with LCD, and antenna connector.

3.1. የፊት ፓነል መቆጣጠሪያዎች እና ማሳያ

• LCD ማሳያ፡- Shows frequency, battery status, audio levels, menu options, and other operational information.
• MENU/SEL Button: Used to enter menus and select options.
• የተመለስ አዝራር; Used to return to the previous menu or exit a setting without saving.
• ማብሪያ ማጥፊያ (⑂): Press and hold to power the unit on or off.
• ወደ ላይ (↑) እና ታች (↓) አዝራሮች፡ Used to navigate menu options and adjust values.
• PWR KEY LED: Indicates power status and key lock.
• Audio Level Indicators (-10, -20): LEDs indicating input audio signal levels.

3.2. ማገናኛዎች

• XLR Connector (Male): Standard 3-pin XLR for connecting microphones or line-level audio sources.
• Antenna Connector (SMA): ውጫዊውን አንቴና ለማያያዝ።

4. የማዋቀር መመሪያ

Follow these steps to prepare your DPR-A transmitter for operation.

4.1. የባትሪ ጭነት

1. Locate the battery compartment (typically on the side or bottom of the unit).
2. የባትሪውን ክፍል ክዳን ይክፈቱ.
3. Insert fresh batteries, observing the correct polarity (+/-) as indicated inside the compartment.
4. የባትሪውን ክፍል ደህንነቱ በተጠበቀ ሁኔታ ይዝጉ።

4.2. Microphone/Line Source Connection

1. Align the XLR connector of your microphone or audio source with the XLR input on the DPR-A transmitter.
2. Push firmly until it clicks into place, ensuring a secure connection.

4.3. የአንቴና ግንኙነት

1. Screw the supplied antenna onto the SMA antenna connector on the side of the transmitter.
2. Tighten the antenna finger-tight; do not overtighten.

5. ኦፕሬሽን

This section details how to operate your DPR-A transmitter.

5.1. ማብራት / ማጥፋት

• ለማብራት፡- የኃይል ቁልፉን ተጭነው ይያዙ (⑂) for approximately 2 seconds until the display illuminates.
• ለማጥፋት፡- የኃይል ቁልፉን ተጭነው ይያዙ (⑂) for approximately 2 seconds. The display will show a power-down confirmation; release the button to confirm.

5.2. ምናሌውን ማሰስ

• ተጫን ማውጫ/SEL ወደ ዋናው ምናሌ ለመግባት.
• የሚለውን ተጠቀም Up (↑) እና ወደታች (↓) buttons to scroll through menu options.
• ተጫን ማውጫ/SEL again to select a highlighted option or enter a sub-menu.
• ተጠቀም Up (↑) እና ወደታች (↓) to change values or settings.
• ተጫን ማውጫ/SEL to confirm a setting, or ተመለስ ሳያስቀምጡ ለመውጣት.
• ተጫን ተመለስ repeatedly to return to the main operating screen.

5.3. የድግግሞሽ ምርጫ

The DPR-A can tune from 470.100 to 607.950 MHz.

1. From the main menu, navigate to the "Frequency" or "Tune" option.
2. የሚለውን ተጠቀም Up (↑) እና ወደታች (↓) buttons to adjust the frequency in 100 kHz or 25 kHz steps.
3. ተጫን ማውጫ/SEL to confirm the selected frequency.

5.4. የውጤት ኃይል ማስተካከያ

The transmitter offers selectable output power of 25 mW or 50 mW.

1. Navigate to the "Power" or "RF Power" setting in the menu.
2. Select either 25 mW or 50 mW using the Up (↑) እና ወደታች (↓) አዝራሮች.
3. ተጫን ማውጫ/SEL ቅንብሩን ለማስቀመጥ.

5.5. Encryption (AES 256-CTR)

The DPR-A supports AES 256-CTR encryption for secure communication. Refer to the detailed encryption setup instructions in the full Lectrosonics manual for key generation and synchronization procedures.

6. ጥገና

Proper care and maintenance will extend the life of your DPR-A transmitter.

6.1. ማጽዳት

• የክፍሉን ውጫዊ ክፍል ለስላሳ እና ደረቅ ጨርቅ ይጥረጉ.
• ለጠንካራ ቆሻሻ በትንሹ መamp ለስላሳ ሳሙና ይልበሱ, ከዚያም ወዲያውኑ ደረቅ ያብሱ.
• ሻካራ ማጽጃዎችን፣ ፈሳሾችን ወይም ጠንካራ ኬሚካሎችን አይጠቀሙ።

6.2. የባትሪ እንክብካቤ

• ክፍሉ እንዳይፈስ ለመከላከል ለረጅም ጊዜ ጥቅም ላይ የማይውል ከሆነ ባትሪዎችን ያስወግዱ።
• ሁልጊዜ ከፍተኛ ጥራት ያላቸውን ባትሪዎች ይጠቀሙ።

6.3. ማከማቻ

• Store the transmitter in a cool, dry place away from direct sunlight and extreme temperatures.
• Protect the unit from physical shock and vibration.

7. መላ መፈለግ

This section addresses common issues you might encounter with your DPR-A transmitter.

If the problem persists after trying these solutions, please contact Lectrosonics customer support.

8. ዝርዝሮች

Technical specifications for the Lectrosonics DPR-A Digital Plug On Transmitter.

• ሞዴል፡ DPR-A
• የድግግሞሽ ክልል፡ 470.100 - 607.950 MHz (UHF TV Band)
• የማስተካከያ ደረጃዎች 100 kHz ወይም 25 kHz
• የውጤት ኃይል፡ Selectable 25 mW or 50 mW
• ምስጠራ፡ AES 256-CTR
• የድምጽ ግቤት፡- Standard XLR connector (microphone/line level)
• አንቴና አያያዥ; የኤስኤምኤ ዓይነት
• የእቃው ክብደት፡ 2 ፓውንድ
• ASIN: B0CPTLS5RX
• መጀመሪያ የሚገኝ ቀን፡- ኦገስት 6፣ 2024

9. የዋስትና መረጃ

Lectrosonics products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the warranty card included with your purchase or visit the official Lectrosonics webጣቢያ. ለዋስትና ጥያቄዎች የግዢ ማረጋገጫዎን ያስቀምጡ።

10. የደንበኛ ድጋፍ

For technical assistance, service, or additional information, please contact Lectrosonics customer support:

• Webጣቢያ፡ www.lectrosonics.com/support
• ስልክ፡ የሚለውን ተመልከት webለክልላዊ አድራሻ ቁጥሮች ጣቢያ.
• ኢሜይል፡- የሚለውን ተመልከት webለድጋፍ ኢሜይል አድራሻዎች ጣቢያ.

When contacting support, please have your product model (DPR-A) and serial number ready.