Ortis Hi-Lo Sump Pump Switch Controller KJ-033 User Manual

1. መግቢያ

The Ortis Hi-Lo Sump Pump Switch Controller KJ-033 is an electronic adjustable float switch designed for automatic water level management in various applications such as sewage pits, fish tanks, and water tanks. It features stainless steel anti-corrosion dual sensors and supports both 220V and 110V AC power inputs. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. የደህንነት መረጃ

ከመጫንና ከስራ በፊት ሁሉንም የደህንነት መመሪያዎች በጥንቃቄ ያንብቡ። እነዚህን መመሪያዎች አለመከተል የኤሌክትሪክ ንዝረት፣ እሳት ወይም ከባድ ጉዳት ሊያስከትል ይችላል።

• የኤሌክትሪክ አደጋ; ማንኛውንም ጭነት፣ ጥገና ወይም ችግር ከመፍታትዎ በፊት የኃይል አቅርቦቱ መቋረጡን ያረጋግጡ።
• ጥራዝtage ተኳኋኝነት የኃይል አቅርቦቱ ጥራዝ መሆኑን ያረጋግጡtage matches the controller's specifications (220V/110V AC).
• ትክክለኛ የመሬት አቀማመጥ; Always connect the device to a properly grounded outlet.
• የውሃ መጋለጥ; Do not immerse the controller unit in water. The controller unit is designed to be mounted above the water level.
• ብቃት ያለው ሰው፡- Installation and electrical connections should be performed by qualified personnel if you are unsure.
• የአካባቢ ሁኔታዎች; Do not operate the device in explosive atmospheres or where flammable liquids or gases are present.

3. የምርት ባህሪዎች

The Ortis KJ-033 controller offers several features for reliable water level management:

• Dual Stainless Steel Sensors: Anti-corrosion sensors for accurate water level detection.
• Adjustable Sensor Range: Sensors can be adjusted from 1/2 inch to 20 inches to define high and low water levels.
• በርካታ የአሠራር ዘዴዎች; Supports Drain Mode (for emptying) and Water Mode (for filling).
• የ LED አመልካቾች Visual feedback for power, load status, and alarm conditions.
• ከመጠን በላይ መጫን ጥበቃ; Integrated protection for connected pumps.
• ተግባር ድምጸ-ከል አድርግ፡ Allows silencing of the alarm.
• ሰፊ መተግበሪያ፡ Suitable for sewage pits, fish tanks, water tanks, and other water management systems.

ምስል 3.1፡ Ortis Water Level Controller Overview with Key Features.

ምስል 3.2፡ Various Application Scenarios for the Controller.

4. ማዋቀር እና መጫን

Proper installation is crucial for the reliable operation of the controller.

4.1 የመቆጣጠሪያ መጫኛ

The controller unit should be mounted in a dry location, above the maximum water level, and within reach of a grounded power outlet.

• የጭረት መጫኛ Use appropriate screws and anchors to secure the controller to a wall or stable surface through the mounting tabs.
• የመጠጫ ዋንጫ መጫኛ; For temporary or non-permanent installations, a suction cup can be used to attach the controller to a smooth, clean surface.

ምስል 4.1፡ Controller Installation Methods.

4.2 Sensor Installation and Adjustment

The dual sensors detect the high and low water levels. Their position determines the operating range of your pump.

• የዳሳሽ አቀማመጥ፡- Position the sensors vertically in the water, ensuring they are securely fastened and will not move. The lower sensor defines the 'low' water level, and the upper sensor defines the 'high' water level.
• የሚስተካከለው ክልል፡ The sensors can be adjusted along their cables to set the desired water level range, from 1/2 inch to 20 inches apart. Ensure both sensors are submerged at the desired 'on' level and the lower sensor is exposed at the desired 'off' level for drain mode, or vice versa for water mode.
• የኬብል አስተዳደር Route sensor cables to prevent entanglement or damage.

ምስል 4.2፡ Adjustable Sensor Installation.

4.3 የኤሌክትሪክ ግንኙነት

• የኃይል መሰኪያ Plug the controller's power cord into a grounded 220V or 110V AC outlet.
• የፓምፕ ግንኙነት; Plug your sump pump or other load device into the outlet on the front of the controller. Ensure the pump's power requirements do not exceed the controller's output capacity (15A, up to 2HP).

ምስል 4.3፡ Example Sump Pit Installation.

5. የአሠራር መመሪያዎች

The controller features a simple interface for selecting operating modes and managing alarms.

ምስል 5.1፡ የቁጥጥር ፓነል አልቋልview.

5.1 ሁነታ ምርጫ

Use the 'Drain' and 'Water' buttons to select the desired operating mode:

• የፍሳሽ ሁነታ; (LED indicator 'Drain' illuminates) In this mode, the controller activates the pump when the water level reaches the upper (high) sensor and deactivates it when the water level drops below the lower (low) sensor. This mode is typically used for emptying sewage pits or sumps.
• የውሃ ሁኔታ (LED indicator 'Water' illuminates) In this mode, the controller activates the pump when the water level drops below the lower (low) sensor and deactivates it when the water level reaches the upper (high) sensor. This mode is typically used for replenishing water in fish tanks or water tanks.

5.2 Power and Operation Switch

The main switch controls the power and operational state of the connected load:

• ራስ-ሰር (LED indicator 'AUTO' illuminates) The controller operates automatically based on the selected mode (Drain or Water) and sensor readings.
• ጠፍቷል (LED indicator 'OFF' illuminates) The connected pump is turned off, regardless of water levels.
• በርቷል (LED indicator 'ON' illuminates) The connected pump is continuously turned on, regardless of water levels. Use this for manual override or continuous operation.

5.3 ድምጸ-ከል ተግባር

Press the 'Mute' button to silence any active alarms. The 'DisAlarm' LED will illuminate when the alarm is muted.

ምስል 5.2፡ Operational Logic in Drain Mode (Sewage Pit Exampለ)።

6. ጥገና

Regular maintenance ensures the longevity and reliable operation of your Ortis controller.

• የአነፍናፊ ጽዳት; Periodically inspect and clean the stainless steel sensors to remove any buildup of debris, algae, or mineral deposits that could affect their accuracy. Disconnect power before cleaning.
• የኬብል ምርመራ; Check all cables and connections for signs of wear, damage, or corrosion. Replace any damaged components immediately.
• የመቆጣጠሪያ ክፍል፡ Keep the controller unit clean and dry. Avoid exposing it to direct sunlight or extreme temperatures.
• የሙከራ ተግባር Periodically test the controller's operation by manually raising or lowering water levels to ensure the pump activates and deactivates as expected in the selected mode.

7. መላ መፈለግ

ለጋራ ጉዳዮች እና መፍትሄዎቻቸው ከዚህ በታች ያለውን ሰንጠረዥ ይመልከቱ።

8. ዝርዝሮች

ምስል 8.1፡ Controller Dimensions.

9. ዋስትና እና ድጋፍ

For warranty information and technical support, please refer to the product packaging or contact the seller/manufacturer directly. Keep your purchase receipt as proof of purchase.

አምራች፡ FJKJ INC.