Baseus BS-CH001 10000mAh Car Jump Starter and Power Bank User Manual

መግቢያ

The Baseus BS-CH001 is a versatile device designed to provide emergency jump-starting for 12V vehicles and serve as a portable power bank for charging electronic devices. With a 10000mAh capacity and a peak current of 1000A, it offers a reliable solution for unexpected car battery issues and on-the-go power needs. This manual provides essential instructions for safe and effective use.

Note: Product images and videos are not included in this manual due to a discrepancy between the product description and the available media assets.

የጥቅል ይዘቶች

እባክዎን ጥቅሉን ለሚከተሉት ነገሮች ያረጋግጡ፡

• 1 x Baseus Car Jump Starter
• 1 x Smart Jump Starter Clamp Cable (with red and black alligator clips)
• 1 x ዩኤስቢ ወደ Type-C የኃይል መሙያ ገመድ

ቁልፍ ባህሪያት

• ከፍተኛ አፈጻጸም፡ 10000mAh capacity, 12V start voltage, 500A starting current, and 1000A peak current.
• ባለብዙ-ተግባር; Acts as both a car jump starter and a portable power bank.
• Reliable Starts: Capable of starting a car up to 50 times on a single full charge.
• የተዋሃደ ማሳያ; Digital screen shows the remaining battery level of the jump starter.
• ከፍተኛ የሙቀት መቋቋም; High-performance polymer battery cells ensure operation in very low and high temperatures.
• የላቀ ደህንነት፡ Features 9 levels of protection including overcharge, voltage stabilization, short circuit, over-discharge, reverse connection, and over-temperature protection.
• Low Standby Power: Retains up to 85% of stored energy after one year of non-use.
• አብሮ የተሰራ የ LED መብራት; Can be used as an emergency flashlight.
• ተንቀሳቃሽ፡ Compact size and technical parameters allow it to be carried on an airplane.

የደህንነት መረጃ

ይህንን ምርት ከመጠቀምዎ በፊት ሁሉንም የደህንነት ማስጠንቀቂያዎች እና መመሪያዎች ያንብቡ። እነዚህን መመሪያዎች አለመከተል የኤሌክትሪክ ንዝረት፣ እሳት እና/ወይም ከባድ ጉዳት ሊያስከትል ይችላል።

• መሳሪያውን አትሰብስቡ፣ አይቀይሩት ወይም አይጠግኑት።
• መሳሪያውን ለዝናብ ወይም ለእርጥበት አያጋልጡት.
• ባትሪው ከተበላሸ መሳሪያውን አይጠቀሙamps ወይም ኬብሎች ተጎድተዋል.
• ትክክለኛውን የፖላሪቲ ግንኙነት ያረጋግጡ (ቀይ clamp ወደ አዎንታዊ, ጥቁር clamp to negative) to avoid short circuits.
• ልጆች በማይደርሱበት ቦታ ያስቀምጡ.
• የቀዘቀዘ ባትሪ ለመጀመር አይዝለሉ።
• አወንታዊ እና አሉታዊውን አያገናኙ clampአብረው s.
• መሳሪያውን በደንብ አየር በሚገኝበት አካባቢ ይጠቀሙ.
• Remove the jump starter from the car battery immediately after starting the vehicle.
• ጥቅም ላይ በማይውልበት ጊዜ መሳሪያውን በቀዝቃዛና ደረቅ ቦታ ያከማቹ.

Setup: Charging the Jump Starter

Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB to Type-C charging cable to the Type-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB power adapter (e.g., 5V/2.4A, not included).
3. The digital display will show the charging progress. Charge until the display indicates 100%.
4. አንዴ ሙሉ ኃይል ከሞላ በኋላ የኃይል መሙያ ገመዱን ያላቅቁ።

Operating Instructions: Car Jump Starting

ተሽከርካሪዎን ለመዝለል እነዚህን እርምጃዎች በጥንቃቄ ይከተሉ።

1. Step 1: Connect the Smart Clamp ኬብል

   Insert the smart jump starter clamp cable into the EC5 interface of the Baseus jump starter. The flashing red and green lights on the clamp indicate it's ready for connection to the car battery.

2. Step 2: Connect to Car Battery

   Open your car's hood. Connect the red positive (+) clamp to the positive (+) terminal of your car battery. Connect the black negative (-) clamp to the negative (-) terminal of your car battery. Ensure a secure connection.

3. Step 3: Start the Vehicle

   Return to your car and start the engine. If the car does not start immediately, wait a few seconds and try again. Do not crank the engine for more than 3 seconds at a time, and wait at least 30 seconds between attempts.

4. ደረጃ 4፡ ግንኙነት አቋርጥ

   Once the car engine starts, immediately remove the smart jump starter clamp cable from the car battery terminals, then disconnect it from the jump starter. Do not drive with the jump starter connected.

Operating Instructions: Power Bank Function

The Baseus BS-CH001 can also be used to charge your electronic devices.

1. Connect your device's charging cable (e.g., USB to Type-C, USB to Lightning) to the USB output port on the jump starter.
2. የኬብሉን ሌላኛውን ጫፍ ወደ ኤሌክትሮኒክ መሣሪያዎ ያገናኙ.
3. The jump starter will automatically begin charging your device. The digital display will show the remaining power.
4. Once charging is complete, disconnect your device and the cable.

ጥገና

• መሳሪያውን በደረቅና ለስላሳ ጨርቅ ያጽዱ። ሻካራ ማጽጃዎችን ወይም ሟሟቶችን አይጠቀሙ።
• የመዝለያ ማስጀመሪያውን ቀዝቃዛና ደረቅ ቦታ ላይ ያስቀምጡት፣ ከፀሐይ ብርሃን እና ከፍተኛ የሙቀት መጠን ራቅ ያድርጉት።
• For optimal battery life, fully charge the device at least once every 3-6 months.
• cl ያስቀምጡamp cables clean and free from corrosion.

መላ መፈለግ

ዝርዝሮች

ዋስትና እና ድጋፍ

This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Baseus webጣቢያ። ለቴክኒክ ድጋፍ፣ የመላ ፍለጋ እርዳታ ወይም ስለ ምትክ ክፍሎች ለመጠየቅ፣ እባክዎን የባዝየስ የደንበኞች አገልግሎትን በይፋዊ ቻናሎቻቸው በኩል ያግኙ።

Note: No specific warranty period or support contact information was provided in the product data. Please refer to the manufacturer's official resources.