WAVLINK WL-WN573HX3 የውጪ ዋይፋይ 6 የመዳረሻ ነጥብ - AX3000 ባለሁለት ባንድ መመሪያ መመሪያ

1. መግቢያ

This manual provides comprehensive instructions for the installation, configuration, and operation of your WAVLINK WL-WN573HX3 Outdoor WiFi 6 Access Point. This device is designed to extend wireless network coverage in outdoor environments, offering high-speed, stable connectivity with advanced features like WiFi 6 technology, Power over Ethernet (PoE), and robust weather protection. Please read this manual thoroughly before beginning installation.

2. ምርት አብቅቷልview

2.1 ቁልፍ ባህሪያት

• የዋይፋይ 6 (802.11ax) ቴክኖሎጂ፡ Supports dual-band speeds up to 2402 Mbps on 5 GHz and 573 Mbps on 2.4 GHz.
• የውጪ ቆይታ; Features an IP67 waterproof enclosure, 15 kV ESD protection, and 6 kV lightning protection for reliable operation in harsh weather conditions.
• በኤተርኔት ላይ ኃይል (ፖ) Compatible with 802.3AF/AT active PoE and passive PoE, allowing power and data transmission over a single Ethernet cable.
• ከፍተኛ ትርፍ አንቴናዎች፡- Equipped with four 8 dBi omnidirectional fiberglass antennas and integrated high-power amplifiers for extended coverage and penetration.
• የሜሽ ቴክኖሎጂ፡ Supports seamless WiFi roaming and expanded coverage with a single network name.
• በርካታ የአሠራር ዘዴዎች; Functions as a Mesh device, Access Point (AP), Router, Repeater, or AP+Repeater.

2.2 የጥቅል ይዘቶች

ሁሉም እቃዎች በጥቅልዎ ውስጥ መኖራቸውን ያረጋግጡ፡-

• 1 x WAVLINK AX3000 WiFi 6 Outdoor Access Point (WL-WN573HX3)
• 4 x Omni Antennas
• 4 x ገመድ ማያያዣዎች
• 1 x Ethernet Cable Connector
• 1 x ፈጣን የመጫኛ መመሪያ
• 1 x Screwdriver
• 2 x የሲሊኮን ፓድስ
• በርካታ ብሎኖች
• Optional Passive PoE Components (if included): 1 x 54V Power Adapter, 1 x PoE Converter, 1 x Ethernet Cable

ምስል: የፊት እና የኋላ view of the WAVLINK WL-WN573HX3 Outdoor WiFi 6 Access Point, showcasing its design and antenna ports.

Image: Illustration demonstrating the AX3000 dual-band WiFi 6 capabilities, with 2.4GHz at 573Mbps and 5GHz at 2402Mbps, suitable for various outdoor activities.

Image: The access point mounted outdoors, with icons representing its resilience to sun, rain, snow, thunder, wind, and hail, highlighting its IP67 weather protection.

3. መጫን

3.1 አካላዊ መጫኛ

The device is designed for pole mounting. Ensure the mounting location is clear of obstructions and provides optimal signal coverage.

1. Attach the two silicone pads to the bracket and the pole where the device will be mounted.
2. Thread the cable ties through the fixing points on the bracket.
3. Securely fix the product to the pole using the cable ties.

Image: Step-by-step diagram illustrating how to mount the access point to a pole using silicone pads and cable ties.

3.2 አንቴና ግንኙነት

Carefully screw the four omnidirectional antennas onto the designated ports on the top of the access point. Ensure they are finger-tight to establish a secure connection.

Image: Diagram showing the numerical order for installing the antennas and other components to the access point.

3.3 በኤተርኔት (ፖ) ግንኙነት ላይ ኃይል

The WL-WN573HX3 supports both active (802.3AF/AT) and passive PoE. This allows power and data to be transmitted through a single Ethernet cable, simplifying outdoor installation.

1. Connect one end of an Ethernet cable (CAT5E or higher, not exceeding 100m) to the Gigabit LAN port on the access point. Use the waterproof connector to seal the connection.
2. Connect the other end of the Ethernet cable to the 'PoE' port on the PoE converter/adapter.
3. Connect another Ethernet cable from the 'LAN/DATA IN' port of the PoE converter to your router or network switch.
4. If using passive PoE, connect the 54V power adapter to the PoE converter.

Note: The PoE converter is not waterproof and must be installed indoors or in a protected enclosure.

Image: Diagram illustrating the Power over Ethernet (PoE) connection, showing the Ethernet cable connecting the access point to a PoE adapter and then to a router, with a maximum cable length of 100m.

4. የአሠራር ዘዴዎች

The WAVLINK WL-WN573HX3 supports various operating modes to suit different network requirements:

• ጥልፍልፍ ሁነታ፡ Creates a seamless WiFi network with multiple Mesh-compatible devices, providing extended coverage and a single network name.
• የAP (የመዳረሻ ነጥብ) ሁነታ፡ Converts a wired network connection into a wireless one, allowing wireless devices to connect.
• ራውተር ሞድ Functions as a primary router, managing network traffic and providing internet access.
• ተደጋጋሚ ሁነታ፡ የአንድ ነባር ገመድ አልባ አውታረ መረብን ክልል ምልክቱን በመድገም ያራዝማል።
• የኤፒ+ተደጋጋሚ ሁነታ፡ Combines the functionalities of an Access Point and a Repeater.

Image: Visual representation of the different operating modes: Mesh, AP/Router, Repeater, and AP+Repeater, showing how the device integrates into various network setups.

ምስል፡ የአየር ላይ view illustrating the seamless and stable roaming provided by Mesh Technology, with multiple access points covering a large outdoor area like a resort or pool.

5. የመጀመሪያ ውቅር

After physical installation and power connection, configure the device via its web የአስተዳደር በይነገጽ.

1. Connect your computer to the same network as the access point (either directly via Ethernet to the PoE converter's LAN port or wirelessly if the default SSID is broadcasting).
2. ክፈት ሀ web browser and enter the default IP address (refer to the Quick Installation Guide for the specific IP address, typically 192.168.10.1 or similar).
3. Enter the default username and password (also found in the Quick Installation Guide).
4. Follow the on-screen setup wizard to select your desired operating mode and configure network settings such as SSID (network name) and password.
5. Save your settings and restart the device if prompted.

6. ጥገና

6.1 የጽኑ ዝማኔዎች

Regularly check the WAVLINK official website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the instructions provided with the firmware update package carefully.

6.2 ጽዳት

Periodically inspect the device for dirt or debris, especially around the antenna connections and cable entry points. Use a soft, dry cloth to clean the exterior. Do not use liquid cleaners or solvents.

7. መላ መፈለግ

• ኃይል የለም፡ Ensure the PoE adapter is correctly connected and receiving power. Check all Ethernet cable connections.
• የበይነመረብ መዳረሻ የለም፡ Verify that the access point is correctly connected to your main router/modem. Check your router's internet connection. Ensure the access point's operating mode is correctly configured.
• ደካማ የዋይፋይ ምልክት፡ Adjust the position of the access point and its antennas. Ensure there are no major physical obstructions. Consider adding another Mesh device if coverage is insufficient.
• መድረስ አልተቻለም Web በይነገጽ፡ Confirm your computer's IP address is in the same subnet as the access point. Try resetting the device to factory defaults (refer to the Quick Installation Guide for reset procedure).

8. ቴክኒካዊ ዝርዝሮች

9. ዋስትና እና ድጋፍ

Information regarding specific warranty terms and software update guarantees for the WAVLINK WL-WN573HX3 is not available in the provided product data. For detailed warranty information, technical support, or to inquire about spare parts, please refer to the official WAVLINK website or contact their customer service directly. Always retain your proof of purchase for warranty claims.