መግቢያ
Thank you for choosing the Vrabocry DC 5V/12V/24V 17 Key RF Wireless Remote LED Controller. This device is designed to provide versatile control over your 5050, 3528, and 5630 LED strip lights, offering a range of static colors and dynamic modes. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.
የደህንነት መረጃ
- የግቤት ጥራዝ ያረጋግጡtage (5V, 12V, or 24V) matches your LED strip lights and power supply. Incorrect voltage can damage the controller and LED strips.
- Do not expose the controller or remote to moisture or extreme temperatures.
- ማንኛውንም ግንኙነት ወይም ግንኙነት ከማድረግዎ በፊት የኃይል አቅርቦቱን ያላቅቁ።
- ይህ ምርት ለቤት ውስጥ አገልግሎት ብቻ የታሰበ ነው።
- ልጆች በማይደርሱበት ቦታ ያስቀምጡ.
የጥቅል ይዘቶች
ጥቅሉ የሚከተሉትን ነገሮች ያካትታል:
- 1 x RF Mini RGB Controller
- 1 x 17-Key RF Wireless Remote (CR2025 battery not included)
- 1 x የተጠቃሚ መመሪያ
ማዋቀር
1. የመቆጣጠሪያ ግንኙነት
- Connect your LED strip light to the 4-pin output connector of the RF Mini RGB Controller. Ensure the polarity is correct (usually indicated by arrows or markings).
- Connect a compatible DC 5V/12V/24V power supply to the input jack of the RF Mini RGB Controller.
- ኃይል ከመተግበሩ በፊት ሁሉም ግንኙነቶች ደህንነታቸው የተጠበቀ መሆኑን ያረጋግጡ።
Image: The Vrabocry RF Mini RGB Controller connected to its 17-key wireless remote. The controller has a white cable with a 4-pin connector for LED strips and a power input jack.
2. የርቀት መቆጣጠሪያ ባትሪ መጫን
The 17-key RF Wireless Remote requires one CR2025 button battery (not included).
- Locate the battery tray on the back of the remote control.
- Gently push the small tab and pull out the battery tray.
- አወንታዊው (+) ጎን ወደላይ የሚያይ አዲስ የCR2025 ባትሪ ያስገቡ።
- Slide the battery tray back into the remote until it clicks into place.
Image: The back of the 17-key RF Wireless Remote, illustrating the battery compartment for a CR2025 battery. Instructions for opening and inserting the battery are visible.
የአሠራር መመሪያዎች
The 17-key RF Wireless Remote allows for comprehensive control of your LED strip lights. The remote operates using a 433MHz wireless signal, providing control without direct line-of-sight.
ምስል፡ ፊት ለፊት view of the 17-key RF Wireless Remote Control, displaying all buttons and their labels for various functions.
የርቀት መቆጣጠሪያ ተግባራት;
| አዝራር | ተግባር |
|---|---|
| በርቷል / ቆሞ | Turns the LED lights on or switches to standby mode. |
| MODE+ / MODE- | Switches between 9 dynamic modes or transitions from static lighting to dynamic modes. |
| SPEED+ / SPEED- | Adjusts the speed of dynamic modes (5 levels). |
| BRIGHT+ / BRIGHT- | Adjusts the brightness of static colors or dynamic modes. |
| COLOR+ / COLOR- | Cycles through 20 static colors. Can also switch from dynamic mode to a static color. |
| SINGLE COLOR SELECT | Directly selects specific static colors: White, Red, Green, Blue, Yellow, Cyan, Pink. |
| DEMO | Activates a demonstration mode cycling through various dynamic effects. |
ተለዋዋጭ ሁነታዎች
The controller offers 9 dynamic modes, including effects such as strobe, breathing, fading in and out, slow flashing, and flickering. Use the MODE+ እና MODE- buttons to cycle through these effects.
የማይንቀሳቀሱ ቀለሞች፡
There are 20 static colors available. Use the COLOR+ እና COLOR- buttons to select your desired color, or use the dedicated single color buttons for quick access to primary colors.
ጥገና
- ማጽዳት፡ Use a soft, dry cloth to clean the controller and remote. Do not use liquid cleaners or solvents.
- የባትሪ መተካት፡ Replace the CR2025 battery in the remote control when its range decreases or it stops responding. Refer to the "Remote Control Battery Installation" section for instructions.
- ማከማቻ፡ ለረጅም ጊዜ ጥቅም ላይ በማይውልበት ጊዜ መሳሪያውን በቀዝቃዛና ደረቅ ቦታ ያከማቹ.
መላ መፈለግ
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| LED strip lights do not turn on. | ለተቆጣጣሪው ኃይል የለም። የተሳሳቱ ግንኙነቶች. የርቀት ባትሪ ሞቷል። | የኃይል አቅርቦት ግንኙነትን ያረጋግጡ. Verify LED strip and power supply connections are secure and correct polarity. የርቀት ባትሪ ይተኩ. |
| የርቀት መቆጣጠሪያ ምላሽ እየሰጠ አይደለም። | የሞተ ወይም በስህተት የተጫነ ባትሪ። Remote is too far from the controller. | Replace CR2025 battery, ensuring correct polarity. Move closer to the controller. The RF signal has a typical range, but obstacles can reduce it. |
| LED colors are incorrect or flickering. | የላላ ግንኙነት። Incompatible LED strip type. | Check all 4-pin connections for the LED strip. Ensure your LED strip is a common anode RGB type compatible with this controller. |
ዝርዝሮች
- ጥራዝtage: 5 ቮ - 24 ቮ ዲሲ
- በአሁኑ ጊዜ የሚሰራ፡ 12A / 3 channels (4A per channel)
- የሥራ ሙቀት; -20°ሴ እስከ 60°ሴ (-4°F እስከ 140°ፋ)
- የመቆጣጠሪያ ልኬቶች; በግምት 1.6 x 0.5 x 0.2 ኢንች (40 x 12.7 x 5 ሚሜ)
- RGB መቆጣጠሪያ፡- 3 output channels, common anode+
- የማይንቀሳቀሱ ቀለሞች፡ 20
- ተለዋዋጭ ሁነታዎች 9
- የፍጥነት ደረጃዎች፡- 5
- የመቆጣጠሪያ ዘዴ፡- 433MHz RF Wireless
- Remote Battery Type: CR2025 (አልተካተተም)
ዋስትና እና ድጋፍ
Vrabocry products are designed for reliability and performance. For warranty information or technical support, please refer to the retailer where you purchased this product or visit the official Vrabocry webጣቢያ. ለዋስትና ጥያቄዎች እባክዎ የግዢ ማረጋገጫዎን ያቆዩ።
በዚህ መመሪያ ውስጥ ያልተካተቱ ማናቸውም ችግሮች ካጋጠሙዎት፣ እባክዎን ለእርዳታ የደንበኞች ድጋፍን ያነጋግሩ።