BUXFMHT Mini Portable Sewing Machine Model 728 User Manual

1. መግቢያ

Thank you for choosing the BUXFMHT Mini Portable Sewing Machine Model 728. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your sewing machine. Please read this manual thoroughly before using the machine to ensure proper function and to prevent damage.

አስፈላጊ የደህንነት መመሪያዎች

• Always unplug the sewing machine from the electrical outlet immediately after using and before cleaning or performing any user maintenance.
• Do not allow children to operate the machine without supervision.
• ጣቶች ከሁሉም ተንቀሳቃሽ ክፍሎች ይራቁ ፡፡ በስፌት ማሽኑ መርፌ ዙሪያ ልዩ ጥንቃቄ ያስፈልጋል ፡፡
• በአምራቹ የተጠቆሙ መለዋወጫዎችን ብቻ ይጠቀሙ።
• ማሽኑ የተበላሸ ገመድ ወይም መሰኪያ ካለው፣ በአግባቡ የማይሰራ ከሆነ ወይም ከወደቀ ወይም ከተበላሸ በጭራሽ አያሽከርክሩት።
• Ensure the machine is placed on a stable, flat surface during operation.

2. የምርት ክፍሎች

Familiarize yourself with the various parts of your sewing machine:

ምስል፡ Labeled diagram of the BUXFMHT Mini Portable Sewing Machine, showing components such as the take-up lever, upper thread tension dial, stitch selector dial, handwheel, LED light, needle clamp, reverse button, bobbin, power on/off speed selector, thread guide, bobbin winder stop, bobbin winder pin, presser foot lifter, presser foot, AC/DC input, and foot pedal input.

• የመውሰጃ ሊቨር፦ የላይኛውን ክር ይመራል።
• Upper Thread Tension Dial: የላይኛውን ክር ውጥረት ያስተካክላል።
• የስፌት መራጭ መደወያ፦ Used to choose from the 14 available stitch patterns.
• የእጅ ጎማ፡ መርፌውን በእጅ ያነሳል እና ዝቅ ያደርጋል።
• የ LED መብራት; የስፌት ቦታውን ያበራል።
• መርፌ ክሊamp: መርፌውን በቦታው ይይዛል።
• የተገላቢጦሽ አዝራር፡- የተገላቢጦሽ ስፌትን ያካሂዳል።
• ቦቢን Holds the lower thread.
• Power On/Off Speed Selector: Controls machine power and speed.
• Foot Pedal Input: Connects the foot pedal for hands-free speed control.
• የኤሲ/ዲሲ ግብዓት፡ የኃይል አስማሚውን ያገናኛል.

3. ማዋቀር

3.1 የኃይል ግንኙነት

1. Ensure the machine is switched off.
2. Connect the power adapter to the AC/DC input port on the machine.
3. አስማሚውን ወደ ተስማሚ የኤሌክትሪክ ሶኬት ይሰኩት።
4. For foot pedal operation, connect the foot pedal to the foot pedal input port.

3.2 ቦቢን ጠመዝማዛ

To wind the bobbin:

1. Place an empty bobbin onto the bobbin winder pin.
2. Guide the thread from the spool pin through the bobbin winding tension disc.
3. Wrap the thread around the bobbin a few times, then push the bobbin winder pin to the right.
4. Turn on the machine and press the foot pedal or speed button to start winding. Stop when the bobbin is full.
5. Cut the thread and push the bobbin winder pin back to the left.

3.3 ማሽኑን መፈተሽ

Correct threading is crucial for proper operation. Follow these steps carefully:

ምስል፡ A diagram illustrating the step-by-step process of threading the upper thread on the sewing machine, indicating the correct path from the spool to the needle.

1. የእጅ መንኮራኩሩን በመጠቀም መርፌውን ወደ ከፍተኛው ቦታ ያሳድጉ.
2. በሾለኛው ፒን ላይ የሾለ ክር ያስቀምጡ.
3. Guide the thread through the thread guide (1).
4. Pass the thread through the upper thread tension disc (2).
5. Bring the thread up and through the take-up lever (3) from right to left.
6. Guide the thread down through the lower thread guide (4).
7. Thread the needle from front to back (5). Ensure the upper thread is at least 15cm long after threading.
8. Insert the wound bobbin into the bobbin case under the needle plate. Pull the bobbin thread out a few inches.
9. የላይኛውን ክር ይያዙ፣ የእጅ መንኮራኩሩን ወደ እርስዎ ያዙሩት እና መርፌውን ዝቅ አድርገው ከፍ ያድርጉት፣ የቦቢን ክር ይያዙ። ሁለቱንም ክሮች ከፕሬስ እግር ስር ወደ ኋላ ይጎትቱ።

ምስል፡ A detailed diagram illustrating the final steps of threading, including holding the upper thread, turning the handwheel, and pulling out the bobbin thread, emphasizing the required thread length.

4. ኦፕሬሽን

4.1 የስፌት ምርጫ

Your machine offers 14 different stitch patterns. To select a stitch, turn the stitch selector dial to the desired number. Refer to the diagram below for available patterns:

ምስል፡ A visual guide displaying the 14 distinct stitch patterns, including straight stitches, zigzag stitches, and buttonhole lines, along with features like 4mm stitch length and auto bobbin winding.

4.2 Adjusting Speed and Direction

• የፍጥነት መቆጣጠሪያ፡- Use the power on/off speed selector switch to choose between low and high speeds. For beginners, starting with low speed is recommended.
• የእግር ፔዳል፡ The foot pedal provides variable speed control. Press gently for slower speeds and more firmly for faster speeds.
• የተገላቢጦሽ ስፌት፡ የተገላቢጦሽ አዝራሩን ተጭነው ይያዙት እና በተገላቢጦሽ መስፋት፣ ይህም በስፌቱ መጀመሪያ እና መጨረሻ ላይ ስፌቶችን ለመጠበቅ ይጠቅማል።

4.3 የጨርቅ ተኳሃኝነት

The machine is designed to handle various fabric types. Refer to the chart below for guidance:

ምስል፡ A table indicating the compatibility of the sewing machine with different fabric types (Cotton/Linen, Silk/Wool, Polyester, Elastic) and thicknesses (Regular, Thick, Thin, Hard, Soft). It specifies compatible, not compatible, and unstable performance.

ማስታወሻ፡- Elastic fabric is generally not recommended for this machine due to potential unstable performance.

4.4 General Operation Guide (Video)

5. ጥገና

5.1 ጽዳት

• ከማጽዳትዎ በፊት ሁልጊዜ ማሽኑን ይንቀሉ.
• ከቦቢን አካባቢ ላይ ያለውን ቆሻሻ እና አቧራ ለማስወገድ እና ውሾችን ለመመገብ ለስላሳ ብሩሽ ይጠቀሙ።
• የማሽኑን ውጫዊ ገጽታ ለስላሳ, መamp ጨርቅ. ኃይለኛ ኬሚካሎችን አይጠቀሙ.

5.2 መርፌ መተካት

• Ensure the machine is unplugged and the needle is in its highest position.
• መርፌውን ይፍቱ clamp ጠመዝማዛ
• የድሮውን መርፌ ያስወግዱ እና ጠፍጣፋው ጎን ወደ ማሽኑ ጀርባ የሚያይበት አዲስ መርፌ ያስገቡ።
• መርፌውን በጥብቅ ይዝጉት clamp ደህንነቱ በተጠበቀ ሁኔታ ይንጠፍጡ።
• Replace needles regularly, especially if they become bent or dull, to prevent skipped stitches or fabric damage.

6. መላ መፈለግ

ችግሮች ካጋጠሙዎት የሚከተሉትን የተለመዱ ችግሮች እና መፍትሄዎች ይመልከቱ።

6.1 Thread Breaking or Jamming

• Incorrect Threading: Ensure both upper and lower threads are correctly threaded according to the instructions in Section 3.3.
• Needle Direction: The needle must be threaded from front to back. Incorrect direction can cause thread breakage.
• የክርክር ርዝመት፡ Before sewing, ensure the upper and lower threads extend at least 4 inches (10 cm) beyond the presser foot.
• Tension Issues: Adjust the upper thread tension dial. Too tight or too loose tension can cause issues.
• የተጎዳ መርፌ: A bent or dull needle can snag thread. Replace the needle if necessary.
• የጨርቅ አቀማመጥ፡ Ensure the presser foot is lowered and the needle is inserted into the fabric before starting to sew.

ምስል፡ A visual comparison of incorrect (left) and correct (right) threading direction for the needle, emphasizing that the thread should go from front to back.

ምስል፡ A diagram illustrating the importance of having both upper and lower threads extended at least 4 inches (10 cm) before beginning to sew to prevent issues.

ምስል፡ A visual guide showing the correct setup before sewing, where the presser foot is lowered against the fabric and the needle is inserted into the fabric.

6.2 የተዘለሉ ስፌቶች

• መርፌው በትክክል መገባቱን እና መታጠፊያ ወይም ደብዛዛ አለመሆኑን ያረጋግጡ።
• Check that the correct needle size is being used for the fabric type.
• Verify proper threading and tension settings.

6.3 ማሽን አይጀምርም

• Check if the power adapter is securely plugged into both the machine and the electrical outlet.
• የኃይል ማብሪያው በ 'ON' ቦታ ላይ መሆኑን ያረጋግጡ።
• If using the foot pedal, ensure it is properly connected.

7. ዝርዝሮች

8. ዋስትና እና ድጋፍ

This BUXFMHT Mini Portable Sewing Machine Model 728 comes with a የ 14 ወር ጥራት ዋስትና ከተገዛበት ቀን ጀምሮ.

If you have any questions, require technical assistance, or need to claim warranty service, please contact BUXFMHT customer support. Refer to the product packaging or the seller's information for contact details. Our support team aims to respond within 24 hours.