Orbit 67100 1/4" Barb Drip Irrigation Multi-Stream Emitter Instruction Manual

መግቢያ

The Orbit 67100 Multi-Stream Drip Emitter is designed for precise micro-watering in various garden settings. It delivers a gentle, full-pattern multi-stream spray, ideal for annuals, shrubs, perennials, or container plants. This emitter allows for adjustable water flow to suit specific plant needs and conserve water.

ምርት አልቋልview

The multi-stream drip emitter features a 1/4-inch barb inlet for direct connection to 1/4-inch drip tubing. It also includes a 10-32 male thread (MT) for optional connection to drip stakes. The emitter's head is adjustable, allowing users to control the spray radius and flow rate.

Image: The Orbit 67100 Multi-Stream Drip Emitter, a black plastic component with a ribbed top and a barb connection at the bottom. The top surface shows markings for flow adjustment.

ቁልፍ ባህሪዎች

• Precise micro-watering for various plants.
• Multiple streams provide gentle flow for efficient soak-in.
• Adjustable flow control to customize water application rates.
• Dual connection options: 10-32 male thread and 1/4-inch barb.
• Compatible with B-hyve smart controllers for water conservation.

ማዋቀር እና መጫን

1. ቱቦውን ያዘጋጁ; Ensure your 1/4-inch drip tubing is cut to the desired length and free of debris.
2. Connect to Tubing: Push the 1/4-inch barb inlet of the emitter directly into the end of the 1/4-inch drip tubing. For easier insertion, you may briefly warm the end of the tubing in warm water.
3. Optional Drip Stake Connection: If using a drip stake, connect the 10-32 male thread of the emitter to a drip stake with a 10-32 female thread.
4. አቀማመጥ፡- Position the emitter near the base of the plant you wish to water. Use a drip tubing Y-anchor stake if needed to secure the emitter in place.
5. የውሃ ምንጭ ግንኙነት፡ Connect the 1/4-inch drip tubing to your main drip manifold, a 1/2-inch drip tubing lateral line, or directly to a hose faucet using a 1/4-inch hose faucet adapter.
6. የስርዓት ፍተሻ፡- Before final operation, briefly turn on the water supply to check for leaks and proper emitter function.

የአሠራር መመሪያዎች

The Orbit 67100 Multi-Stream Drip Emitter allows for easy adjustment of water flow and spray radius.

የውሃ ፍሰት ማስተካከል;

The top of the emitter features a rotating head with markings for adjustment. To decrease the spray radius and water flow, rotate the multi-stream head clockwise towards the "minus" symbol. To increase the spray radius and water flow, rotate the head counter-clockwise towards the "plus" symbol. You can also shut off the flow completely by rotating it fully clockwise.

The recommended operating pressure for this emitter is 30 PSI. For optimal water conservation, consider integrating the system with an Orbit B-hyve smart controller.

ጥገና

• መደበኛ ምርመራ; Periodically check emitters for clogs or damage.
• ማጽዳት፡ If an emitter becomes clogged, gently remove it from the tubing and rinse it under running water. A small brush can be used to clear any debris from the nozzles.
• ክረምት ማድረግ፡ In freezing climates, disconnect and drain your irrigation system, including emitters, to prevent damage from ice expansion.

መላ መፈለግ

ዝርዝሮች

• ሞዴል፡ 67100
• የምርት ስም፡ ምህዋር
• ቁሳቁስ፡ ፕላስቲክ
• ቀለም፡ ጥቁር
• Inlet Type: 1/4" Barb and 10-32 Male Thread (MT)
• የሚረጭ ንድፍ፡ Multi-Stream, Full Pattern
• Maximum Spray Radius: Up to 3 feet (at 30 PSI)
• የሚመከር የአሠራር ግፊት 30 PSI
• ልኬቶች (L x W x H)፦ 1 x 1 x 1 ኢንች
• የእቃው ክብደት፡ 1 pounds (for a single unit, though sold in packs)
• አጠቃቀም፡ Outdoor irrigation with cold water only

ዋስትና እና ድጋፍ

For warranty information or technical support, please refer to the official Orbit webጣቢያ ወይም የደንበኞች አገልግሎት ክፍልን ያነጋግሩ። ለዋስትና ጥያቄዎች የግዢ ደረሰኝዎን ያስቀምጡ።

የእውቂያ መረጃ፡- እባክዎን ይጎብኙ የኦርቢት መደብር በአማዞን ላይ or the official Orbit webበጣም ወቅታዊ የድጋፍ ዝርዝሮች ለማግኘት ጣቢያ.