ARMOURY A08 Micro ATX Tower Case Instruction Manual

1. መግቢያ

This manual provides instructions for the installation, operation, and maintenance of the ARMOURY A08 Micro ATX Tower Case. The A08 is a computer chassis designed to house Micro-ATX and Mini-ITX motherboards, featuring a real wood front panel and a tempered glass side panel. Please read this manual thoroughly before beginning assembly.

2. የጥቅል ይዘቶች

ከዚህ በታች የተዘረዘሩት ሁሉም ክፍሎች በጥቅሉ ውስጥ መኖራቸውን ያረጋግጡ፡

• ARMOURY A08 Micro ATX Tower Case
• 4 x Magnetic Case Covers
• Dust Filters (pre-installed or separate)
• Accessory Box (containing various screws, standoffs, and cable ties)

ምስል፡ ፈነዳ view of the ARMOURY A08 case, showing the main chassis, front panel, top filter, side panels, and PSU shroud.

3. የአካል ክፍሎችን መለየት

Familiarize yourself with the various parts of the ARMOURY A08 case.

የፊት ፓነል

ምስል፡ ፊት ለፊት view of the ARMOURY A08 case, highlighting the real wood accents and mesh intake.

የኋላ ፓነል

ምስል: የኋላ view of the ARMOURY A08 case, showing the rear fan mount, I/O shield cutout, and four horizontal expansion slots.

የውስጥ አቀማመጥ

ምስል: የውስጥ view of the ARMOURY A08 case, displaying the motherboard tray, cable routing cutouts, and drive mounting locations.

4. የመጫኛ መመሪያ

Follow these steps to install your computer components into the ARMOURY A08 case.

4.1 ጉዳዩን ማዘጋጀት

1. Remove the tempered glass side panel by unscrewing the thumb screws and carefully sliding it off. Place it on a soft, flat surface to prevent damage.
2. Remove the rear side panel (solid panel) to access the cable management area.
3. Remove the front panel by gently pulling from the bottom edge until the clips release.

4.2 የማዘርቦርድ ጭነት

1. Install the I/O shield into the cutout on the rear of the case.
2. Align your Micro-ATX or Mini-ITX motherboard with the pre-installed standoffs.
3. የቀረቡትን ብሎኖች በመጠቀም ማዘርቦርዱን ያስጠብቁ።

4.3 የኃይል አቅርቦት አሃድ (PSU) መጫኛ

1. Mount the standard ATX PSU into the designated compartment at the bottom rear of the case.
2. PSUን ከኋላ በኩል ባሉት ብሎኖች ያስጠብቁት።

4.4 የማከማቻ ድራይቭ መጫኛ

The case supports 2 x 3.5" HDDs (tool-free), 2 x 2.5"/3.5" drives (tool-free), and 2 x 2.5" SSDs (tool-free).

1. For 3.5" drives, slide them into the tool-free drive cages.
2. For 2.5" drives, mount them onto the designated trays or locations using the provided screws.

4.5 የማስፋፊያ ካርድ መጫኛ

1. አስፈላጊውን የማስፋፊያ ማስገቢያ መሸፈኛዎች ከሳጥኑ ጀርባ ያስወግዱ።
2. የግራፊክስ ካርድዎን ወይም ሌሎች የማስፋፊያ ካርዶችዎን ወደ ማዘርቦርዱ PCIe ማስገቢያዎች ያስገቡ።
3. ካርዶቹን በዊንችዎች ያስጠብቁ።

4.6 የማቀዝቀዣ ስርዓት መጫኛ

መያዣው የተለያዩ የአየር ማራገቢያ እና የራዲያተሮች አወቃቀሮችን ይደግፋል፡-

• ፊት፡ Up to 280mm / 240mm radiator or fans.
• ከፍተኛ፡ Up to 240mm radiator or fans.
• ከታች፡ Up to 240mm radiator or fans.
• ጎን፡ Up to 120mm radiator or fans.
• የኋላ፡ Up to 120mm fan.

Install fans or radiators into the desired locations using the appropriate screws.

4.7 የኬብል አስተዳደር

ኬብሎችን ለማደራጀት የኬብል ማስተላለፊያ መቁረጫዎችን እና ከእናትቦርዱ ትሪ ጀርባ ያሉትን የማቆሚያ ነጥቦችን ይጠቀሙ። ይህ የአየር ፍሰትን እና ውበትን ያሻሽላል።

5. የፊት ግቤት/ውስጥ ፓነል አጠቃቀም

The front I/O panel provides convenient access to essential ports.

Image: Close-up of the ARMOURY A08 front I/O panel, showing USB ports and audio jacks.

• የኃይል ቁልፍ፡- ስርዓቱን ለማብራት ወይም ለማጥፋት ይጫኑ።
• ዩኤስቢ 3.2 Gen 2 Type-C (x1)፦ ከተኳኋኝ መሣሪያዎች ጋር ለከፍተኛ ፍጥነት የውሂብ ማስተላለፍ።
• ዩኤስቢ 3.0 አይነት-ኤ (x2)፦ የዩኤስቢ ተቀጥላዎችን ለማገናኘት።
• ኤችዲ ኦዲዮ ጃክሶች፡ የጆሮ ማዳመጫዎችን እና ማይክሮፎኖችን ለማገናኘት።

6. ጥገና እና ጽዳት

መደበኛ ጥገና የፒሲዎን ክፍሎች ጥሩ አፈፃፀም እና ረጅም ጊዜ እንዲኖር ይረዳል።

• የአቧራ ማጣሪያዎች; Periodically remove and clean the dust filters (top, front, bottom) to maintain good airflow and prevent dust buildup inside the case. Use compressed air or rinse with water and allow to dry completely before reinstallation.
• የውጭ ጽዳት; ውጫዊ ገጽታዎችን ለስላሳ, መamp cloth. Avoid abrasive cleaners or solvents that may damage the finish or the real wood panel.
• የተስተካከለ የመስታወት ፓነል፡ Clean the tempered glass with a microfiber cloth and a glass cleaner. Avoid excessive force or impact to prevent breakage.

7. መላ መፈለግ

ችግሮች ካጋጠሙዎት የሚከተሉትን መሰረታዊ የመላ ፍለጋ ደረጃዎች ያስቡባቸው፡

• ስርዓቱ እየበራ አይደለም፡- Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components. Verify the PSU switch is in the 'ON' position. Check front panel power button connections to the motherboard.
• አድናቂዎች የማይሽከረከሩ; Confirm fan headers are correctly connected to the motherboard. Check BIOS/UEFI settings for fan control.
• Front I/O Ports Not Working: Ensure the USB and audio headers from the case are correctly connected to the corresponding pins on the motherboard.
• ከመጠን በላይ ማሞቅ; Verify proper fan orientation for optimal airflow (intake/exhaust). Ensure dust filters are clean and not obstructing airflow. Check CPU cooler and GPU cooler installation.

8. ዝርዝሮች

9. የዋስትና መረጃ

No specific warranty description is provided for the ARMOURY A08 Micro ATX Tower Case in the product specifications. Please refer to your retailer or point of purchase for details regarding warranty coverage and terms.

10. የደንበኛ ድጋፍ

For further assistance or inquiries regarding the ARMOURY A08 Micro ATX Tower Case, please contact the manufacturer or your retailer.

• አምራች፡ ARMOURY (Canada Computers & Electronics)
• የምርት ስም መደብር፡ Visit the ARMOURY Store on Amazon.ca