ራስ-ሰር የPulse Pro ውህደት ድጋፍ

አውቶሜትድ PULSE PRO OVERVIEW
አውቶሜትድ የሞተር ሼዶችን ወደ ELAN Smart Home መቆጣጠሪያ ስርዓቶች ያለምንም እንከን በማዋሃድ የራስ-ሰር ተሞክሮዎን ያሳድጉ። Automate Pulse PRO በጥላ አቀማመጥ እና በባትሪ ደረጃዎች ላይ ቅጽበታዊ ዝመናዎችን በማቅረብ ከልዩ የጥላ ቁጥጥር እና የሁለት መንገድ ግንኙነት ጋር ኃይለኛ ውህደትን ይሰጣል። ሁለቱንም ኢተርኔት (CAT 5) እና 2.4GHz ገመድ አልባ ግንኙነትን በማሳየት፣ Pulse PRO በማዕከሉ ጀርባ ላይ በሚገኘው በቀላሉ ለመድረስ በሚችል የRJ45 ወደብ በኩል ለስላሳ የቤት አውቶሜሽን ውህደት ያረጋግጣል። እያንዳንዱ ቋት እስከ 30 የሚደርሱ ጥላዎችን ይደግፋል, ይህም ለማንኛውም የቤት አውቶማቲክ ማቀናበሪያ ሁለገብ መፍትሄ ያደርገዋል.

አልቋልVIEW

አምራች፡	Rollease Acmeda
የሞዴል ቁጥር(ዎች)	Automate Pulse PRO
የኮር ሞዱል ሥሪት፡-	8.3
የአሽከርካሪ ገንቢ፡	አባሪ 4
የሰነድ ማሻሻያ ቀን፡-	1/24/2025

አልቋልVIEW & SUPPORTED FEATURES
This driver is a Lighting Interface Controller for the Rollease Acmeda Automate Pulse PRO. It allows IP control over Rollease shades from ELAN.

THE FOLLOWING OPTIONS ARE SUPPORTED BY THIS DRIVER:

• Dimmer, Shade, and Louvre lighting devices.
• Realtime feedback of shade positions updated to ELAN Core.
• Open, and Ramp Up commands.
• Close, and Ramp Down commands.
• Stop to halt the movement of rotation or positioning.
• Rotation accurate to 1.8% increments.
• Position accurate to 1% increments.
• እንደ ድጋፍ ተደርጎ ያልተገለጸ ማንኛውም ባህሪ የማይደገፍ ነው ተብሎ መታሰብ አለበት።

AUTOMATE PULSE PRO HUB CONFIGURATION
The hub will need to be installed and configured with the Automate Pulse application. All shades should be configured with the Automate Pulse application before starting the installation of the ELAN driver. Please refer to the Automate Pulse application for step by step instructions on how to add shades to your hub.

ውቅረት

As with all third-party drivers these do not reside in the typical listing of drivers from ELAN. To add this driver to an ELAN system:

1. Download the. EDRVC file associated with this document if you do not already have it.
2. Place the. EDRVC file በኮምፒተርዎ ላይ ባለው ቦታ ላይ.
   • We recommend \User\<User>\Documents\Elan\Drivers.
3. In the g! Configurators navigate to the Lighting Interfaces item under Lighting.
4. Navigate to the location you saved the. EDRVC file to and select it.
5. Select “Rollease Acmeda Automate v2” from the list and click “OK”.
6. A prompt will appear saying there will be no support from ELAN, click “OK”.
7. The driver should now be visible under the Lighting Interfaces header.

INSTALATION PROCESS

It is recommended that you follow the below installation process in order to proper functionality with the driver.

1. Select the Interface Type you want to use in Elan to control the shades.
   • You can do this by setting the configuration option “Interface Type” to “Dimmer”, “Shade”, or “Both”.
2. Enter the IP address of the Automate Pulse PRO Hub in the “IP Address” field.
3. Click “Discover Devices” at the bottom of the lighting interface window.
   • Please wait a few seconds for the driver to find all the shades on the hub.
4. At this point your shades should be created under the lighting interface.
   • [Optional] If you want to control the rotation of the shade you can add a Louvre device
5. Select Lighting Devices (None) or any of the shades that have been created.
   • Select “Add New Device”.
   • Select “Louvre Tilt”.
   • Enter the Address of the shade in the “Shade Address” configuration line of the new device.
   • Enter “LOUVRE” (without quotes) into the Device Type field.
6. Bind the devices to user interface components in the custom pages.

የማዋቀር ዝርዝሮች
የሚከተለው ሠንጠረዥ በማዋቀሪያው ውስጥ ጥቅም ላይ የሚውሉ ቅንብሮችን ያቀርባል። ከታች ባለው ሠንጠረዥ፡-

• “<User Defined>”, etc. Type in the desired name for the item.
• “<Auto Detect>”, etc. The system will auto detect this variable.
• “<System>”, etc. The setting has been automatically set by the system. o “<Select>” A dropdown with a list of options.

መሳሪያዎች	ተለዋዋጭ ስም	በማቀናበር ላይ	አስተያየቶች
የመብራት በይነገጽ	ስም	<User Defined>	Default “Rollease Acmed a Automate v2”
	ስርዓት #		መሣሪያውን ለመለየት በስርዓቱ የተገለፀው
	Status Color Coding		ነቅቷል ወይም ተሰናክሏል
	ሁኔታ		የአሽከርካሪው ሁኔታ፣ አረንጓዴ ጥሩ እና ቀይ ማለት የመጫን ችግር ነበር።
	የአሽከርካሪ ስሪት		የአሽከርካሪው ስሪት
	ሹፌር ሻጭ		አባሪ 4
	ተጭኗል		ነጂው የተጫነበት ቀን እና ሰዓት
	የመሣሪያ ዓይነት		ሹፌሩ ምን አይነት መሳሪያ እንደሆነ የሚገልጽ መለያ
	ጥላዎች		በሹፌሩ የተገኙ የጥላዎች ዝርዝር
	ማረም ሁነታ		በአሽከርካሪ ምዝግብ ማስታወሻው ውስጥ መታየት ያለባቸውን የግቤቶችን ቃልነት ይምረጡ
	የበይነገጽ አይነት		ግኝቱ ሲከሰት የሚፈጠሩትን መሳሪያዎች አይነት ይምረጡ
	የአይፒ አድራሻ	<User Defined>	The IP address of the Pulse PRO Hub
	ወደብ	<User Defined>	Defaults to 1487, this should not be changed unless the Hub itself has changed its IP address
የብርሃን መሳሪያ	ስም	<User Defined>	የመሳሪያው ስም
	አካባቢ		በፕሮጀክቱ ውስጥ የመሳሪያው ቦታ
	ስርዓት #		መሣሪያውን ለመለየት በስርዓቱ የተገለፀው
	የመሣሪያ ዓይነት		የመሳሪያው ዓይነት
	Hide Device from Scheduler
	የጥላ አድራሻ	<User Defined>	The address of the shade to control
	ዓይነት	<User Defined>	SHADE, DIMMER, or LOUVER.

የተለመዱ ስህተቶች

1. Entering the wrong IP address in the “IP Address” configuration line.
   • If you’re failing to discover devices double check this!

ELAN CONTROL SYSTEM CONNECTION

ለተጨማሪ እርዳታ ቸርቻሪዎን ያነጋግሩ፣ የእኛን ይጎብኙ webጣቢያ በ www.rolleaseacmeda.com.

የድጋፍ ምንጮች፡-

rolleaseacmeda.com
0 2025 Rollease Acmeda Group

ተዘውትረው የሚጠየቁ ጥያቄዎች

No Pulse PRO detected.

የእርስዎ Automate Pulse PRO ለትክክለኛው አውታረመረብ መመደቡን ያረጋግጡ እና የአይ ፒ አድራሻን ያግኙ እና አሁንም አውቶማቲክ ጥላዎች መተግበሪያን በመጠቀም ከአውታረ መረቡ ጋር ይገናኙ።

የጥላ ገደቦች በትክክል አልተዘጋጁም።

Calibrate shade limits with your Rollease Acmeda remote before setting the appropriate open and close time within ELAN SYSTEM.

ጥላ ጨርሶ አይንቀሳቀስም።

Make sure the selected Pulse PRO Hub is the correct Pulse PRO Hub for the shade to be controlled. Confirm the correct bindings are set in the ELAN System connections tab between the Pulse PRO Hub and Shade drivers.

I have multiple Pulse PRO’s, what do I do?

Load two Automate Pulse PRO Hub drivers. After selecting “Retrieve Hubs” located in the driver actions tab, you will see different Automate Pulse PRO Hubs- select the desired one.

በPulse PRO Hub ሾፌር ውስጥ ምንም ዓይነት የጥላ ማሰሪያ አይታየኝም?

በአሽከርካሪ ድርጊቶች ትር ውስጥ የሚገኘውን "ጥላዎችን ሰርስሮ ማውጣት" የሚለውን ይምረጡ.

How do I scan for available Automate Pulse PRO?

Once the Automate Pulse PRO Hub is properly connected via the Ethernet cable or Wireless network, navigate to the Automate Pulse PRO Hub Properties page within Composer. Select “Retrieve Hubs” located in the driver actions tab.

We get unexpected responses from the ELAN system, or “?” symbols

Ensure that all connections using the ethernet port or Wi-Fi are working properly. The missed connection has been known to yield unwanted or unexpected results.

ሰነዶች / መርጃዎች

AUTOMATE Automate Pulse Pro ውህደት ድጋፍ [pdf] የተጠቃሚ መመሪያ 8.3፣ annex4፣ Automate Pulse Pro ውህደት ድጋፍ፣ Automate Pulse Pro፣ የውህደት ድጋፍ፣ ድጋፍ

ዋቢዎች

• የተጠቃሚ መመሪያ