VEVOR C110 TPMS RV Tire Pressure Monitoring System

የምርት መረጃ

ዝርዝሮች

• ሞዴል፡ C110
• ጥራዝtage: ዲሲ 12 ቪ
• ኃይል፡- 0.03 ዋ
• Test The Tire Pressure Range (Bar): 0.5-6
• የተጣራ ክብደት: 0.1 ኪ.ግ

የምርት አጠቃቀም መመሪያዎች

ባህሪያት

1. Monitor the pressure and temperature of your tyres
2. ለኃይል ቁጠባ ብልህ የመኝታ ሁነታ

መዋቅር

The product consists of a wrench, nut, sensor, and host.

Parameter Setting Reference

1. Before using the product, charge the display for 3-4 hours with the cigarette plug charger.
2. የፋብሪካ ነባሪ መለኪያ ቅንብሮች፡-
   • Hl pressure alarm data: 3.0 Bar (0.6-6.0 Bar range)
   • Low-pressure alarm data: 2.0 Bar (0.5-5.9 Bar range)
   • Hl temperature alarm data: 68 (50-99 ክልል)
   • ማስታወሻ፡- 1 Bar = 14.5 Psi

የአሠራር መመሪያ

1. When the ACC is ON, the display will enter self-test mode for 2 seconds.
2. When the speed reaches 20 kilometers per hour, the sensor will activate and start detecting and sending pressure and temperature data.
3. Alarming instructions:
   • a) Over-pressure or leakage will trigger a warning.
   • b) High temperature will trigger an alarm with corresponding icons and sounds.
   • c) A low sensor battery will trigger a warning with icons and sounds.

መግቢያ

• የመሳሪያዎችን ተወዳዳሪ ዋጋ ለእርስዎ ለማቅረብ ቁርጠኝነታችንን እንቀጥላለን።
• ግማሹን ይቆጥቡ”፣ “ግማሽ ዋጋ” ወይም በእኛ የምንጠቀምባቸው ሌሎች ተመሳሳይ አገላለጾች የተወሰኑ መሳሪያዎችን ከእኛ ጋር በመግዛት ሊጠቅሙ የሚችሉትን የቁጠባ ግምት ብቻ ነው የሚወክሉት ከዋና ዋና ብራንዶች ጋር ሲነፃፀሩ ነው፣ እና በእኛ የሚቀርቡትን ሁሉንም የመሣሪያዎች ምድቦች ይሸፍናል ማለት አይደለም። ከዋና ዋና ብራንዶች ጋር ሲነጻጸር ግማሹን እየቆጠቡ ከሆነ ከእኛ ጋር ትእዛዝ ሲሰጡ በጥንቃቄ እንዲያረጋግጡ በአክብሮት አሳስበዎታል።
• ይህ የመጀመሪያው መመሪያ ነው። እባክዎን ከመሥራትዎ በፊት ሁሉንም የእጅ መመሪያዎች በጥንቃቄ ያንብቡ። VEVOR የእኛን የተጠቃሚ መመሪያ ግልጽ ትርጓሜ ይይዛል።
• የምርቱ ገጽታ ለተቀበሉት ምርት ተገዢ መሆን አለበት። እባክዎን በምርታችን ላይ ምንም የቴክኖሎጂ ወይም የሶፍትዌር ማሻሻያዎች ካሉ እንደገና ስላላሳውቅዎት ይቅርታ ያድርጉልን።

የአጫዋች ዝርዝር

ሞዴል	C110
ጥራዝtage	ዲሲ 12 ቪ
ኃይል	0.03 ዋ
Test The Tire Pressure Range (Bar)	0.5-6
የተጣራ ክብደት (ኪግ)	0.1

ክፍል ዝርዝር

ኦፕሬሽን

ባህሪያት

1. Monitor the pressure and temperature of your tyres
2. ለኃይል ቁጠባ ብልህ የመኝታ ሁነታ
3. Tyre leaking warning
4. Visual and audible warning for abnormal tyre pressure and temperature
5. Displays up to 4 tyre temperatures and pressures at a glance
6. Can be set to Fixed Bar or PSI
7. Can be set to °C or °F temperature

መዋቅር

1. የግፊት ክፍል
2. የሙቀት መለኪያ
3. የግፊት ውሂብ
4. የሙቀት ውሂብ
5. Sensor battery indicator
6. የማስጠንቀቂያ ምልክቶች
7. የግቤት ጥራዝtage
8. SET”Button
9. (+) አዝራር
10. የዩኤስቢ ወደብ

PARAMETER ቅንብር ማጣቀሻ

1. Before using this product, please press any button on the display to turn it on, and charge the display for 3-4 hours with the cigarette plug charger.
2. የፋብሪካ ነባሪ መለኪያ ቅንብር
   

   የፋብሪካ ነባሪ ቅንብር	የመለኪያ ቅንብር ክልል
   Hl pressure alarm data: 3.0Bar	0.6-6.0 ባር
   low-pressure alarm data:2.0Bar	0.5-5.9 ባር
   Hl temperature alarm data: 68℃	50-99℃

3. 1Bar=14.5Psi

የክወና መመሪያ

1. When the ACC is ON, the display will get into self-test mode for 2 seconds. After 2 seconds, all icons will be displayed on the LCD screen and ready to receive the new data. When the ACC is OFF, the display will be OFF.
2. When the speed is up to 20 kilometers per hour, the sensor will be activated, and start to detect and send the Pressure and temperature data.
3. Alarming instruction
   • a) When tyre pressure is over the set range or the tyre is leaking, the corresponding tyre position icon, pressure data, and the alarm icon (!) will flash together, and the built-in buzzer will chirp as: Bi Bi ·.
   • ማስታወሻ፡- Press any button can stop the buzzer, but all corresponding icons still flash, buzzer will chirp once per minute.
   • b) When tyre temperature is over the set data, the according tyre position icontemperature data, and high temperature alarm icon (!) will flash together, and the built-in buzzer will chirp as: Bi Bi.
   • c) When the sensor battery is low, the icon * of the corresponding tyre position, the sensor’s low battery icon will flash together, and the built-in buzzer will chirp as: Bi Bi.
   • ማስታወሻ፡- To stop the buzzer, press the set buzzer.
   • ማስታወሻ፡- all icons will still flash, buzzer will “Chirp” once per minute.

የማንቂያ ሁኔታ

Leaking or low tyre pressure alarm

• ለምሳሌ፡- L.R. tyre leaking or low tyre pressure alarm. The corresponding tyre position icon, pressure data, and the alarm icon (!) will flash together.

High tyre pressure alarm

• ክልል አዘጋጅ፡ 1.7~3. 4Bar ለምሳሌ፡- L.R. tyre high-pressure alarm. The corresponding tyre position icon , pressure data, and the alarm icons (!) will flash together.

High tyre temperature alarm

• የፋብሪካ ነባሪ ቅንብር፡- 70°C. E.g.: L. R. tyre high temperature alarm. Temperature data and high high-temperature alarm icon (!) will flash together.

ዝቅተኛ ባትሪ ዳሳሽ

• Sensor battery normal life: 3-5 years. E.g.: L.R. Tyre high temperature alarm. The tyre position icon sensor low battery icon አብረው ብልጭ ድርግም ይላሉ።

Sensor not work

• ለምሳሌ፡- L.R. tire sensor does not work for the corresponding tyre position icon , pressure data, and the temperature will disappear together

WORK PARAMETER SETTING OPERATION

1. ያስገቡ እና የቅንብር ሁነታን ያቋርጡ፡
   • Press the “ SET ” button and hold on for 3 seconds, release the button after hearing 1 long chirp, the monitoring system will enter the setting mode. Press the “ SET ” button short time to recycle among the following settings: Bar-Psi, C >F, pressure Hl, pressure LO, alarm temperature HI. Press the (+) button to adjust the corresponding data. After finishing all settings, press the “ SET ” button and hold on for 3 seconds.
   • After hearing l short chirp, the system saves all set parameters and quits the setting mode.
   • (ማስታወሻ፡- After entering the setting mode, if there is no operation within 3 minutes, the system will quit the mode and back to normal working mode automatically)
2. Tyre pressure HI setting:
   • Press and hold the “ SET ” button for 3 seconds, release the button after hearing 1 long chirp, will enter the setting mode.
   • Then press the (+) button one by one to get into tyre pressure HI setting mode. The pressure HI data flash, press the (+) button to adjust the data, then press the “ SET ” button and hold on for 3 seconds, release the button after hearing a short chirp, the system saves the set data and quit the mode.
   • (ማስታወሻ፡- the set pressure HI data must be higher than the set pressure LO data. Pressure HI adjustable range: 0.6-6.0 Bar. Factory default setting: 3.0Bar)
3. Tyre pressure LO setting: Press and hold on the (+) button for 3 seconds.
   • Release the button after hearing a long chirp; the system enters the setting mode. Then press the “ SET ” button one by one to enter into tyre pressure LO setting status. The pressure LO data will flash press the (+) button to adjust the data, then press the “ SET ” button and hold for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode.
   • (ማስታወሻ፡- the set pressure LO data must be lower than the set pressure HI data. Pressure LO adjustable range: 0.5-5.9 Bar, Factory default setting: 2.0Bar)
4. Release the button after hearing the long chirp, and the system enters the setting mode.
   • Then press the (+) button one by one to get into alarm temperature HI setting status, the icon will flash, press the RIGHT button to adjust the data, then press the button and hold on for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode.
   • (ማስታወሻ፡- temperature HI adjustable range: 50 ℃ – 99 ℃ Factory default setting: 68 ℃ )
5. የግፊት አሃድ ቅንብር; Press and hold on the (+) button for 3 seconds, release the button after hearing a long chirp. The system enters pressure unit setting mode. The Bar icon will flash, press the (+) button to adjust the unit, then press the set button and hold on for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode. (Factory default setting: Bar)
6. የሙቀት አሃድ ቅንብር; Press and hold the (+) button for 3 seconds, release the button after hearing a long chirp, and the system enters the setting mode. Then press the (+) button one by one to get into the temperature unit setting status. The C icon will flash. Press the button to adjust the data, then press the button and hold on for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode.
7. Tyre pressure code matching Long press the (+) button for 3 seconds and release it after hearing a long “Bi” to enter the tyre pressure code matching mode, the left front wheel icon and “_.” fash press the “ SET ” button to select the tyre to be matched, and the corresponding tyre after selection “_.” will flashing, at this time, inflate the corresponding tyre (The external sensor is directly screwed to the valve), after receiving the signal “_.” changes to the pressure value to indicate that the matching is successful, then short press the (+) button to jump to the next tyre. Follow the previous step to match other tyres. After matching, press and hold the (+) button for 3 seconds, save and exit. After a “Bi” (Entering the tyre matching mode without any action, the matching mode will automatically exit after 3 minutes)
   • (ማስታወሻ፡- The sensor and receiver have been matched before leaving the factory, and the sensor or receiver needs to be re-matched to change the sensor or receiver.)

INTERNAL SENSOR INSTALLATION

1. Jack up the car and remove the tire.
2. Remove the original valve.
3. Tighten up screw
4. Install the tire from the left side of the valve clockwise direction, avoiding the tire bead from hitting the valve and sensor.
5. ዳሳሽ መሰብሰብ
6. Tighten the valve by wrench and screw it (Torque value must be ≥ 4Nm)
7. ጎማውን ​​ማመጣጠን.
8. Mount the tire in its position.

የውጭ ዳሳሽ መጫኛ

1. የቫልቭ ክዳን ይክፈቱ።
2. በለውዝ ውስጥ ይንጠፍጡ.
3. Screw in the sensor.
4. Lock the sensor with an anti-theft wrench.

Movement / Replacement of battery

1. Peel off the non-slip gasket
2. Unscrew the sensor with a wrench

የኤፍ.ሲ.ሲ መረጃ

ይህ መሳሪያ የFCC ደንቦች ክፍል 15ን ያከብራል። ክዋኔው በሚከተሉት ሁለት ሁኔታዎች ተገዢ ነው.

1. ይህ ምርት ጎጂ ጣልቃገብነት ሊያስከትል ይችላል.
2. ይህ ምርት የተቀበለውን ማንኛውንም ጣልቃ ገብነት መቀበል አለበት፣ ያልተፈለገ ስራን የሚያስከትል ጣልቃ ገብነትን ጨምሮ።

ጥንቃቄ፡- ለማክበር ኃላፊነት ባለው አካል በግልፅ ያልፀደቁ ለውጦች ወይም ማሻሻያዎች የተጠቃሚውን መሳሪያ የማንቀሳቀስ ስልጣን ሊያሳጡ ይችላሉ!
ማስጠንቀቂያ፡- በዚህ ምርት ላይ የተደረጉ ለውጦች ወይም ማሻሻያዎች በፓርቲው በግልጽ ያልጸደቁ። ለማክበር ኃላፊነት ያለው ምርቱን የማንቀሳቀስ የተጠቃሚውን ስልጣን ሊያሳጣው ይችላል።
ማስታወሻ፡- ይህ ምርት በFCC ሕጎች ክፍል 15 መሠረት ለክፍል B ዲጂታል መሣሪያ ተሞክሯል እና ገደቡን የሚያከብር ሆኖ ተገኝቷል። እነዚህ ወሰኖች የተነደፉት በመኖሪያ ተከላ ውስጥ ካለው ጎጂ ጣልቃገብነት ምክንያታዊ ጥበቃን ለመስጠት ነው።
ይህ ምርት የሬድዮ ፍሪኩዌንሲ ሃይልን ያመነጫል፣ ይጠቀማል እና ሊያሰራጭ ይችላል፣ እና ካልተጫነ እና በመመሪያው መሰረት ጥቅም ላይ ካልዋለ በሬዲዮ ግንኙነቶች ላይ ጎጂ ጣልቃገብነት ሊያስከትል ይችላል። ነገር ግን, በአንድ የተወሰነ መጫኛ ውስጥ ጣልቃ ገብነት እንደማይፈጠር ምንም ዋስትና የለም. ይህ ምርት በሬዲዮ ወይም በቴሌቭዥን መስተንግዶ ላይ ጎጂ ጣልቃገብነትን የሚያስከትል ከሆነ፣ ምርቱን በማጥፋት እና በማብራት ሊወሰን ይችላል፣ ተጠቃሚው ከሚከተሉት እርምጃዎች በአንዱ ወይም ከዚያ በላይ በሆነ መልኩ ጣልቃ ገብነትን ለማስተካከል እንዲሞክር ይበረታታል።

• የመቀበያ አንቴናውን አቅጣጫ ቀይር ወይም ወደ ሌላ ቦታ ቀይር።
• በምርቱ እና በተቀባዩ መካከል ያለውን ርቀት ይጨምሩ.
• ምርቱን ተቀባዩ ከተገናኘበት በተለየ ወረዳ ላይ ካለው መውጫ ጋር ያገናኙት.
• ለእርዳታ ሻጩን ወይም ልምድ ያለው የሬዲዮ/ቲቪ ቴክኒሻን አማክር።

ትክክለኛ መጣል

• ይህ ምርት በአውሮፓ መመሪያ 2012/19/EU ድንጋጌዎች ተገዢ ነው። የዊሊ ቢን የተሻገረበት ምልክት የሚያሳየው ምርቱ በአውሮፓ ህብረት ውስጥ የተለየ ቆሻሻ መሰብሰብ እንደሚያስፈልገው ያሳያል።
• This applies to the product and all marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling of electrical and electronic device accessories

የደንበኛ አገልግሎት

• አምራች፡ Shanghaimuxinmuyeyouxiangongsi
• አድራሻ፡ Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
• ወደ AUS የመጣ፡ SIHAO PTY LTD 1 ሮኬቫ ጎዳና አስትዎድ NSW 2122 አውስትራሊያ
• ወደ ዩኤስኤ የመጣ፡ ሳንቨን ቴክኖሎጂ ሊሚትድ፣ ስዊት 250፣ 9166 አናሄም ቦታ፣ ራንቾ ኩካሞንጋ፣ ካሊፎርኒያ 91730
• YH ኮንሰልቲንግ ሊሚትድ
• C/O YH Consulting Limited Office 147፣ Centurion House፣ London Road፣ Staines-Upon-Thames፣ Surrey፣ TW18 4AX
• E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.

የዋስትና የምስክር ወረቀት

• የቴክኒክ ድጋፍ እና ኢ-ዋስትና የምስክር ወረቀት www.vevor.com/support

በተደጋጋሚ የሚጠየቁ ጥያቄዎች

How do I stop the buzzer alarm?

To stop the buzzer, press the set buzzer; please note that all icons will still flash, and the buzzer will chirp once per minute.

ሰነዶች / መርጃዎች

VEVOR C110 TPMS RV Tire Pressure Monitoring System [pdf] መመሪያ መመሪያ C110, C110 TPMS RV Tire Pressure Monitoring System, TPMS RV Tire Pressure Monitoring System, Tire Pressure Monitoring System, Pressure Monitoring System, Monitoring System

ዋቢዎች

• የተጠቃሚ መመሪያ