መግቢያ
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your DANFOSS APP2.5 180B3046 High Pressure Pump. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage or injury. Keep this manual for future reference.
የደህንነት መረጃ
Always observe general safety precautions when working with high-pressure equipment. Failure to follow these instructions may result in serious injury or equipment damage.
- Ensure all connections are secure and leak-free before operation.
- Do not operate the pump if any part is damaged or appears to be malfunctioning.
- Wear appropriate personal protective equipment (PPE) during installation, operation, and maintenance.
- ወሳኝ ማስጠንቀቂያ፡- Use a 10 μ absolute filter with a β-value ≥ 5000.
- ወሳኝ ማስጠንቀቂያ፡- Bleed the system prior to initial start-up to remove air.
ማዋቀር እና መጫን
- ማሸግ፡ Carefully remove the pump from its packaging. Inspect for any signs of shipping damage.
- መጫን፡ Securely mount the pump on a stable, level surface, ensuring adequate ventilation and access for maintenance.
- ማጣሪያ፡ Install a 10 μ absolute filter with a β-value ≥ 5000 in the inlet line to protect the pump from contaminants.
- የቧንቧ መስመሮች; Connect the inlet and outlet piping according to system requirements. Ensure all connections are tight to prevent leaks.
- የኤሌክትሪክ ግንኙነቶች; If applicable, connect the pump to the power supply according to local electrical codes and the pump's specifications. (Note: Specific electrical details are not provided and should be handled by a qualified electrician).
- የስርዓት ደም መፍሰስ; Before initial start-up, ensure the system is properly bled to remove all air. Refer to your system's specific bleeding procedure.
የአሠራር መመሪያዎች
- ቅድመ-ጅምር ቼክ፡
- ሁሉም ግንኙነቶች ደህንነታቸው የተጠበቀ መሆኑን ያረጋግጡ።
- Confirm the system is filled with the correct fluid and properly bled.
- Check that the filter is clean and correctly installed.
- ጅምር፡ Gradually bring the pump up to operating speed/pressure. Monitor for unusual noises or vibrations.
- ክትትል፡ During operation, regularly check pressure gauges, flow rates, and temperature to ensure the pump is operating within its specified parameters.
- ዝጋው: Follow your system's shut-down procedure. Typically, this involves gradually reducing pressure and then turning off the pump.
ጥገና
Regular maintenance is crucial for the longevity and optimal performance of your DANFOSS APP2.5 pump.
- የማጣሪያ ምትክ Periodically inspect and replace the 10 μ absolute filter as recommended by your system's maintenance schedule or when pressure drop across the filter indicates clogging.
- የፈሳሽ ጥራት፡ Ensure the hydraulic fluid or water quality meets the manufacturer's specifications. Contaminated fluid can severely damage the pump.
- የልቅሶ ፍተሻ፡- Regularly check for any signs of leaks around connections and seals. Address any leaks immediately.
- አጠቃላይ ጽዳት; Keep the exterior of the pump clean and free from debris.
መላ መፈለግ
This section provides solutions to common issues. For problems not listed here, contact technical support.
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| ዝቅተኛ ግፊት ወይም ግፊት የለም | Air in the system; Clogged filter; Insufficient fluid supply; Pump malfunction. | Bleed the system; Replace filter; Check fluid level and supply; Contact support. |
| ያልተለመደ ድምጽ / ንዝረት | Air in the system; Loose mounting; Cavitation; Bearing wear. | Bleed the system; Tighten mounting bolts; Check inlet conditions; Contact support. |
| መፍሰስ | የተዘጉ ግንኙነቶች፤ የተበላሹ ማኅተሞች። | Tighten connections; Inspect and replace seals if necessary. |
ዝርዝሮች
| ባህሪ | ዝርዝር |
|---|---|
| ሞዴል | APP2.5 180B3046 |
| ዓይነት | ከፍተኛ ግፊት ያለው ፓምፕ |
| የምርት ስም | DANFOSS |
| መነሻ | ዋናው ቻይና |
| Required Filtration | 10 μ absolute filter with a β-value ≥ 5000 |
| የጥቅል መጠኖች (በግምት) | ርዝመት: 30 ሴሜ, ስፋት: 30 ሴሜ, ቁመት: 20 ሴሜ |
| የጥቅል ክብደት (በግምት) | 1.0 ኪ.ግ |
የተጠቃሚ ምክሮች
- Always ensure proper filtration is in place to extend the pump's lifespan and maintain efficiency. A 10 μ absolute filter with a β-value ≥ 5000 is crucial.
- Before any initial start-up or after maintenance, thoroughly bleed the system to prevent air pockets, which can cause cavitation and damage.
- Regularly check the system for any unusual noises or vibrations; these are often early indicators of potential issues.
ዋስትና እና ድጋፍ
For warranty information, technical support, or service inquiries, please contact the seller or an authorized DANFOSS service center. Keep your purchase records handy when contacting support.
