AMAZON CON4 Sauna Stove Controller Instruction Manual

1. መግቢያ

This manual provides detailed instructions for the installation, operation, and maintenance of the AMAZON CON4 Sauna Stove Controller. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of your sauna heater.

2. የደህንነት መረጃ

WARNING: Electrical installation should only be performed by a qualified electrician in accordance with all local and national electrical codes.

• Always disconnect power to the sauna heater before performing any installation, maintenance, or troubleshooting.
• Do not operate the controller with wet hands or in wet conditions.
• ሁሉም ግንኙነቶች ደህንነታቸው የተጠበቀ እና በትክክል የተከለሉ መሆናቸውን ያረጋግጡ።
• Keep the control panel and control box away from water and high humidity.
• This device is intended for controlling sauna stoves. Do not use it for other purposes.

3. የጥቅል ይዘቶች

ሁሉም እቃዎች በጥቅሉ ውስጥ መኖራቸውን ያረጋግጡ፡-

• AMAZON CON4 Control Panel
• Control Box (Power Unit)
• Temperature Probe Cable

4. ዝርዝሮች

5. መጫን እና ማዋቀር

Proper installation is crucial for the safe and effective operation of the sauna stove controller. It is highly recommended that installation be performed by a certified electrician.

5.1 አካል መለየት

ከዋና ዋናዎቹ ክፍሎች ጋር ይተዋወቁ;

• የቁጥጥር ፓነል The user interface for setting time and temperature.
• የመቆጣጠሪያ ሳጥን፡- The main power unit that connects to the sauna heater and power supply.
• የሙቀት ምርመራ; Measures the room temperature in the sauna.

5.2 የወልና ግንኙነቶች

The control box handles the main electrical connections to the sauna heater and the power supply. The control panel connects to the control box, and the temperature probe connects to the control panel.

1. መጫን፡ Securely mount the control box and control panel in appropriate locations. The control panel should be easily accessible to the user, while the control box can be mounted in a less visible, but well-ventilated area.
2. የኃይል አቅርቦት; Connect the main power supply to the control box. Ensure the voltage and current ratings match your sauna heater and local electrical standards.
3. Sauna Heater Connection: Connect the sauna heater's power cables to the designated terminals within the control box.
4. የቁጥጥር ፓነል ግንኙነት; Connect the control panel to the control box using the provided cable.
5. Temperature Probe Installation: Install the temperature probe inside the sauna room, typically on a wall at a recommended height (refer to your sauna heater's manual for specific placement). Connect the temperature probe cable to the designated port on the control panel.

CAUTION: Incorrect wiring can lead to electric shock, fire, or damage to the equipment. Always consult a professional for electrical installation.

6. የአሠራር መመሪያዎች

The CON4 control panel features an intuitive interface for managing your sauna experience.

6.1 የቁጥጥር ፓነል በላይview

የቁጥጥር ፓነል የሚከተሉትን ያጠቃልላል

• ዲጂታል ማሳያዎች፡ Two displays show "Time Remaining" and "Room Temperature".
• አዝራሮች፡-
  • ጊዜ አዘጋጅ፡ Adjusts the sauna operating time.
  • የሙቀት መጠን ያዘጋጁ Adjusts the desired sauna room temperature.
  • Mode A/B: Selects between different operating modes (details may vary, refer to specific sauna heater manual).
  • አብራ/አጥፋ Controls the sauna room lighting.
  • አብራ/አጥፋ፡ Powers the sauna heater on or off.
  • ወደ ላይ/ወደታች ቀስቶች፡ Used to increase or decrease time and temperature settings.

6.2 መሠረታዊ አሠራር

1. ማብራት/ማጥፋት፡ የሚለውን ይጫኑ አብራ/አጥፋ button to turn the sauna heater system on or off.
2. የማቀናበር ጊዜ፡
   1. የሚለውን ይጫኑ ጊዜ አዘጋጅ አዝራር።
   2. የሚለውን ተጠቀም ወደ ላይ/ወደታች ቀስቶች to adjust the desired operating time.
   3. The display will show the remaining time during operation.
3. የሙቀት መጠንን ማቀናበር;
   1. የሚለውን ይጫኑ የሙቀት መጠን ያዘጋጁ አዝራር።
   2. የሚለውን ተጠቀም ወደ ላይ/ወደታች ቀስቶች to adjust the desired room temperature.
   3. ማሳያው አሁን ያለውን የክፍል ሙቀት ያሳያል።
4. Controlling Light: የሚለውን ይጫኑ መብራት አብራ/አጥፋ button to toggle the sauna room light.
5. ሁነታ ምርጫ፡- If your sauna heater supports multiple modes, press the Mode A/B በመካከላቸው ለመቀያየር አዝራር።

7. ጥገና

Regular maintenance ensures the longevity and proper functioning of your sauna stove controller.

• ማጽዳት፡ Wipe the control panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• ምርመራ፡- ሁሉንም የሽቦ ግንኙነቶች ጥብቅነት እና የመበስበስ ወይም የመጎዳት ምልክቶችን በየጊዜው ያረጋግጡ።
• አካባቢ፡ Ensure the control panel and control box are kept in a dry environment, free from excessive dust or moisture.

WARNING: Always disconnect power before cleaning or inspecting the control box or any electrical components.

8. መላ መፈለግ

If you encounter issues with your sauna stove controller, try the following basic troubleshooting steps:

• ኃይል የለም፡
  • Check the main power supply to the control box.
  • ሁሉም የኤሌክትሪክ ግንኙነቶች አስተማማኝ መሆናቸውን ያረጋግጡ.
  • መሆኑን ያረጋግጡ አብራ/አጥፋ አዝራር ተጭኗል።
• የተሳሳተ የሙቀት ንባብ;
  • Ensure the temperature probe is correctly installed and connected to the control panel.
  • Check for any obstructions around the temperature probe that might affect its reading.
• Sauna Heater Not Heating:
  • Verify that the desired temperature is set higher than the current room temperature.
  • Check the operating time setting; ensure sufficient time is allocated.
  • Confirm that the sauna heater itself is functioning correctly (refer to the sauna heater's manual).

ለቋሚ ጉዳዮች፣ እባክዎ የደንበኛ ድጋፍን ያግኙ።

9. የተጠቃሚ ምክሮች

To enhance your sauna experience and ensure the longevity of your equipment:

• For optimal sauna experience, allow the sauna heater to preheat for at least 30-60 minutes before use.
• Always ensure proper ventilation in the sauna room.
• Regularly check the sauna stones and replace them if they are cracked or crumbling.

10. ዋስትና እና ድጋፍ

10.1 የዋስትና መረጃ

The AMAZON CON4 Sauna Stove Controller comes with the following warranty:

• Main Electrical Components: One (1) year free warranty from the date of purchase for material and quality issues. This warranty does not cover accessories or other non-electrical parts.
• ማሞቂያ ቱቦ; Three (3) months or ninety (90) days warranty.

The company reserves the right to choose between repair or replacement. Any returns for repair must be pre-approved by the company. Return shipping costs are the responsibility of the customer.

ዋስትናው ለሚከተሉት ጉዳቶች አይሸፍንም

• Incorrect use or operation.
• Negligence or accidental breakage.
• Improper power connection.
• Modification or repair by unauthorized personnel.

After the warranty period, paid repair services are available, covering material costs for parts and travel expenses.

10.2 የደንበኛ ድጋፍ

For any questions, technical assistance, or warranty claims, please contact us:

• WhatsApp: +86 155766507
• ኢሜይል፡- 1434250503@qq.com
• WeChat፡- 15576650740