CRAFTSMAN CMXCESM262 Lithium Jump Starter and Portable Power Pack

መግቢያ

Thank you for choosing the CRAFTSMAN CMXCESM262 Lithium Jump Starter and Portable Power Pack. This versatile 3-in-1 device combines a powerful jump starter, a rapid USB charger, and a multi-mode LED light, designed for convenience and reliability. This manual provides essential information for the safe and effective use of your device.

Figure 1: CRAFTSMAN CMXCESM262 Lithium Jump Starter and Portable Power Pack with included accessories.

ጠቃሚ የደህንነት መረጃ

WARNING: Read the entire instruction manual before using this product to prevent serious injury or damage.

• Do not use this product if it is damaged, wet, or not fully charged.
• Do not attempt to jump start a frozen, severely discharged, or damaged battery.
• Avoid using the product if the battery is leaking, hot, swollen, discolored, corroded, or emitting any unusual sounds or odors.
• በሚሰሩበት ጊዜ ተገቢውን የአየር ዝውውር ያረጋግጡ.
• ልጆች በማይደርሱበት ቦታ ያስቀምጡ.
• Consult a medical professional if you have a pacemaker or other medical device before use.

Figure 2: Back of the device with quick instructions and safety warnings.

የጥቅል ይዘቶች

ሁሉም እቃዎች በጥቅልዎ ውስጥ መኖራቸውን ያረጋግጡ፡-

• (1) CRAFTSMAN CMXCESM262 Lithium Jump Starter and Portable Power Pack
• (1) 12V DC Car Charger
• (1) የዩኤስቢ-ሲ ኃይል መሙያ ገመድ
• (1) Carrying Case with Built-in Cable Storage
• (1) የተጠቃሚ መመሪያ (ይህ ሰነድ)

ማዋቀር እና የመጀመሪያ ኃይል መሙላት

የመጀመሪያ ክፍያ

Before first use, fully charge the jump starter. It is recommended to fully charge the unit after each use and every 3-6 months when not in use to maintain battery health.

• Using 12V DC Car Charger: Connect the 12V DC car charger to the jump starter and then to your vehicle's 12V accessory outlet. Charging time is approximately 4 hours.
• Using USB-C Charging Cable: Connect the USB-C cable to the jump starter and a compatible USB power adapter (not included). Charging time is approximately 7-8 hours.

The battery indicator lights on the device will show the charging progress and current battery level.

የአሠራር መመሪያዎች

ተሽከርካሪ በመጀመር ላይ ዝለል

The CMXCESM262 is designed to jump start vehicles with up to 10.0L gas engines and 8.0L diesel engines. It is compatible with standard, AGM, gel, and deep-cycle batteries.

1. አገናኝ፡ Ensure the jump starter is sufficiently charged. Connect the red clamp ወደ የተሽከርካሪው ባትሪ አወንታዊ (+) ተርሚናል እና ጥቁር clamp to a metal part of the vehicle's chassis (away from the battery and fuel lines) or the negative (-) terminal if safe to do so.
2. ጀምር፡ Turn on the jump starter. Attempt to start the vehicle. If the vehicle does not start immediately, wait a few minutes and try again. The device features Schumacher’s Pre-Heating Technology for reliable starts in freezing temperatures and Pre-Boost for deeply discharged batteries.
3. አስወግድ፡ Once the vehicle starts, immediately disconnect the black clamp, ከዚያም ቀይ clamp, from the vehicle.

Figure 3: Engine compatibility chart for gasoline and diesel vehicles.

Using as a Portable Power Pack (USB Charger)

The device includes a 2.4A USB port for charging smartphones and other USB-powered devices. This port delivers ultra-fast charging, up to 2x faster than standard USB ports.

• Connect your device's USB charging cable to the jump starter's USB port.
• The jump starter can provide power for up to 50 jump starts on a single charge, or extended use as a power bank.

የ LED መብራትን በመጠቀም

The built-in LED light offers three modes for various situations:

• የተረጋጋ፡ ለአጠቃላይ ብርሃን.
• Flashing (SOS): ለአደጋ ጊዜ ምልክት።
• ጭረት For attracting attention.

To cycle through the modes, press the light button repeatedly.

Figure 4: The 3-in-1 multifunctional power source with LED light activated.

ጥገና

• በመሙላት ላይ፡ Always recharge the unit after each use. For optimal battery life, recharge every 3-6 months even when not in use.
• ማጽዳት፡ Keep the unit clean and free from dirt, dust, and moisture. Use a dry cloth to wipe the exterior.
• ማከማቻ፡ Store the jump starter in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. The device is designed to work in extreme temperatures from -4°F to 140°F (-20°C to 60°C), but storage in moderate conditions is recommended for longevity.

Figure 5: The jump starter is designed for reliable operation in a wide range of temperatures.

መላ መፈለግ

ዝርዝሮች

የተጠቃሚ ምክሮች

• Always ensure the jump starter is fully charged before heading out, especially for long trips or in cold weather.
• cl ያስቀምጡamps clean and free of corrosion for optimal conductivity.
• When jump starting, connect the clamps firmly to ensure a good connection.
• Utilize the LED light's SOS or strobe mode in emergency situations to enhance visibility.
• Store the unit in its protective case to prevent damage.

ዋስትና እና ድጋፍ

For warranty information, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. If you encounter any issues not covered in this manual, or require further assistance, please contact CRAFTSMAN customer support.

Manufacturer: CRAFTSMAN

Model: CMXCESM262