የጉዳይ ተኳኋኝ የአጃክስ መሣሪያዎች የተጠቃሚ መመሪያ

የጉዳይ ተኳኋኝ አጃክስ መሣሪያዎች

 

ማርች 14፣ 2025 ተዘምኗል

መያዣ አንድ ወይም ከዚያ በላይ ተኳኋኝ የሆኑ የአጃክስ መሳሪያዎችን ለመጫን የተነደፈ መያዣ ነው። የተጠናቀቀው ስብስብ የቲampመሣሪያዎችን ከ sabo ለመጠበቅ ሰሌዳtage. Case has fasteners to fix the cables and channels for convenient cable organization. The casing is intended for indoor use only.

Case is produced in several versions. Each model has a different number of slots depending on the device combination:

 

  • Case A (106) — one Ajax device;
  • Case B (175) — up to two Ajax devices;
  • Case C (260) — one Ajax device and 7 Ah battery;
  • Case D (430) — up to eight devices and two 18 Ah batteries.

 

መያዣ ይግዙ

የትኛውን ጉዳይ ለመምረጥ

 

ተግባራዊ ንጥረ ነገሮች

ጉዳይ ሀ (106) ጉዳይ ለ (175) ጉዳይ ሐ (260) ጉዳይ መ (430)

FIG 1 ተግባራዊ አካላት

 

  1. Holding screws to secure the casing lid. Can be unscrewed with abundled hex key (Ø 4 mm).
  2. Bubble level to check the inclination angle of the mount during installation.
  3. በመቆፈር ጊዜ መሳሪያን ለመከላከል ማቆሚያዎች.
  4. የቲampየአጃክስ መሣሪያን ለማገናኘት በሽቦ ያለው ሰሌዳ።
  5. መሣሪያን ለማያያዝ መያዣዎች.
  6. Perforated part of the casing. Do not break it off. This part is necessary for tamper triggering in case of any attempt to detach thecasing from the surface.
  7. መከለያውን ወደ ላይ ለማያያዝ ቀዳዳዎች.
  8. Perforated part to run the wires.
  9. Fasteners to fi x the cables with ties.
  10. Recesses to drill the holes conveniently.

 

ተስማሚ መሣሪያዎች

The number of devices installed into Case depends on the dimensions ofthe casing and its confi guration.

የተኳኋኝነት ሰንጠረዥ
Case A (106)
ጉዳይ B (175)
Case C (260)
ጉዳይ ዲ

FIG 2 Compatibility table

FIG 3 Compatibility table

 

ቁልፍ ባህሪያት

Case has latches for attaching devices without tools. Slide the latch toremove the device.

FIG 4 Key features

መሳሪያው በሁለት ቦታዎች ላይ ተስተካክሏል. 180 ° ማዞር ይችላሉ.

FIG 6 Key features

 

FIG 5 Key features

Case has fasteners to fi x the cables with ties and channels for convenientcable routing. The casing has perforated parts to run the cables throughthe back side. There are recesses to place the drill conveniently (in caseyou need to drill holes and run the cables along the side, bottom, or top).During drilling, the tool rests on plastic stoppers, ensuring the installed devices remain protected.

የጉዳይ A (106) ወይም መያዣ B (175) ክዳን በሚጫኑበት ጊዜ 180 ° ሊሽከረከር ይችላል.

FIG 7 Key features

Case C (260) and Case D (430) have battery holders at the bottom of thecasing to prevent accidental dislodgement. The holding stripe for securingthe battery is included with Case D (430).

Case D (430) has sixteen slots for plastic holders for Fibra modulesinstallation. Holders are available in two versions:

  • Module Holder (type A) for Superior LineSplit Fibra, Superior LineProtect Fibra, Superior MultiRelay Fibra attachment;
  • Module Holder (type B) — for Superior Hub Hybrid (4G) (without casing) and Superior MultiTransmitter Fibra (without casing).

አራት ናቸው። Module Holder (type A) in the complete set. Additional holders and Module Holder (type B) ለብቻ ይሸጣሉ.

የላቀ የመስመር አቅርቦት ፋይብራ ለመጫን መያዣዎችን አይፈልግም።

 

የመጫኛ ቦታን መምረጥ

It is advisable to choose an installation site where Case is hidden fromprying eyes — for example, in the pantry. This will help reduce thelikelihood of the system sabotage. Note that the device is intended forindoor installation only.

The Case installation site must comply with the recommendations formounting the devices installed in the casing.

Follow these recommendations when designing the Ajax system projectfor an object. The system should be designed and installed byprofessionals. The list of authorized Ajax partners is እዚህ ይገኛል።

 

መያዣ መጫን አይቻልም

መከለያው ከጫኑት ሊበላሽ ይችላል-

  1. ከቤት ውጭ።
  2. Inside premises with temperature and humidity values that do not correspond to the operating parameters

 

መሳሪያዎችን ወደ መያዣ ለመጫን በመዘጋጀት ላይ

የትኛውን ጉዳይ ለመምረጥ

በጣም ጥሩውን የፋይብራ መሳሪያዎችዎን በካዚንግ ውስጥ ለማግኘት ኬዝ ማዋቀርን ይጠቀሙ።

የኬብል ዝግጅት

When preparing to cable routing, check the electrical and fi re safety regulations in your region. Strictly follow these standards and regulations.Tips for cable arrangement are available in this article

የኬብል መስመር

We recommend you read the Selecting the installation site section carefully before installation. Avoid deviations from the system project.Violating the basic installation rules and the recommendations of this manual may lead to incorrect operation and loss of connection with devices installed into Case.

ገመዱን እንዴት ማዞር እንደሚቻል

ለግንኙነት ገመዶችን በማዘጋጀት ላይ
Remove the insulating layer and strip the cable with a special insulationstripper. The ends of the wires inserted into the device terminals must betinned or crimped with a sleeve. This ensures a reliable connection andprotects the conductor from oxidation.

ገመዱን እንዴት ማዘጋጀት እንደሚቻል

 

መጫን

Before installation, ensure that you have selected the optimal location forthe casing and that it complies with the requirements of this manual.

Case A (106)
ጉዳይ B (175)
Case C (260)
Case D ( 430)

መያዣን ለመጫን:

  1. Prepare cable holes in advance: drill the holes in the bottom or side ofthe casing or break out the perforated part on the back of Case. Werecommend using a hole saw for plastic Ø16 mm or Ø20 mm.

FIG 8 ጭነት

 

ቧንቧውን, የተጣጣመ ቱቦን ወይም ቧንቧን ወደ መያዣው ቀዳዳዎች ውስጥ ያስገቡ.

FIG 9 ጭነት

2. Route the cables and lead them through the pre-prepared holes.Secure Case on the vertical or horizontal surface at the selected installation site with the bundled screws using all fixation points. One of them is in the perforated part above the tamper — it is required fortampአንድ ሰው መያዣውን ለመንቀል ከሞከረ ያነሳሳል።

FIG 10 ጭነት

3. መሳሪያውን በማሸጊያው ውስጥ ያስቀምጡት. ገመዶቹን ወደ ተጓዳኝ ተርሚናሎች ያገናኙ. ማሰሪያዎችን በመጠቀም ገመዶቹን ከግንኙነት ጋር ያስተካክሉ.
4. ቲ ያገናኙamper ቦርድ ወደ ተገቢው መሣሪያ አያያዥ.

FIG 11 ጭነት

 

5. Place the lid on the casing and fasten it with the bundled screws.
6. Check the state of the lid in the Ajax app. If the app shows the Front lid open state, check the tightness of Case.

 

ጥገና

መሣሪያው ጥገና አያስፈልገውም.

ቴክኒካዊ ዝርዝሮች

Technical specifications for Case A (106)
Technical specifications for Case B (175)
Technical specifications for Case C (260)
Technical specifications for Case D (430)
ደረጃዎችን ማክበር

 

ዋስትና

ለተገደበ ተጠያቂነት ኩባንያ ምርቶች ዋስትና "Ajax Systems Manufacturing" ከተገዛ በኋላ ለ 2 ዓመታት ያገለግላል.

መሣሪያው በትክክል የማይሰራ ከሆነ፣ እባክዎ በመጀመሪያ Ajax Technical Support ያግኙ። በአብዛኛዎቹ ሁኔታዎች ቴክኒካዊ ጉዳዮች በርቀት ሊፈቱ ይችላሉ.

የዋስትና ግዴታዎች
የተጠቃሚ ስምምነት

የቴክኒክ ድጋፍን ያግኙ፡

  • ኢ-ሜይል
  • ቴሌግራም

በ"AS Manufacturing" LLC የተሰራ

 

ስለ ደህና ሕይወት ለዜና መጽሔቱ ይመዝገቡ። አይፈለጌ መልእክት የለም።

FIG 12 Subscribe

 

ስለዚህ መመሪያ የበለጠ ያንብቡ እና ፒዲኤፍ ያውርዱ፡-

ሰነዶች / መርጃዎች

AJAX መያዣ ተኳሃኝ አጃክስ መሣሪያዎች [pdf] የተጠቃሚ መመሪያ
ጉዳይ A 106፣ ኬዝ B 175፣ ኬዝ C 260፣ መያዣ D 430፣ የጉዳይ አጃክስ መሣሪያዎች፣ መያዣ

ዋቢዎች

አስተያየት ይስጡ

የኢሜል አድራሻዎ አይታተምም። አስፈላጊ መስኮች ምልክት ተደርጎባቸዋል *