1. መግቢያ
The Unify OpenStage 30 T is a digital system phone designed for business communication environments. It offers a range of features to enhance productivity and communication efficiency within a compatible Private Branch Exchange (PBX) system. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your OpenStage 30 T phone.
Figure 1: Unify OpenStage 30 T Digital Phone. This image displays the front view of the phone, highlighting its display, keypad, and function keys.
ቁልፍ ባህሪዎች
- 2-line monochrome graphic display
- 8 fixed function keys with LED indicators
- 8 programmable keys with LED indicators
- የቁጥር ቁልፍ ሰሌዳ
- Full Duplex Speakerphone for hands-free communication
2. ማዋቀር
The OpenStage 30 T is a digital system phone that requires connection to a compatible Unify (formerly Siemens Enterprise Communications) PBX system. It is not designed for direct connection to a standard analog telephone line.
2.1 ስልኩን ማገናኘት
- ቀፎውን ያገናኙ፡ Plug the coiled cord from the handset into the designated port on the side or back of the phone base.
- የመስመሩን ገመድ ያገናኙ; Connect one end of the telephone line cord to the 'Line' port on the back of the OpenStage 30 T phone. Connect the other end to the appropriate digital extension port on your PBX system or wall jack provided by your system administrator.
- የኃይል ግንኙነት; The OpenStage 30 T typically receives power directly from the digital line connection to the PBX. No separate power adapter is usually required. If your specific setup requires an external power supply (not included), connect it to the designated power port and then to an electrical outlet.
2.2 የመጀመሪያ ጅምር
Once connected, the phone will power on automatically. The display will show a boot-up sequence, and then typically display the date, time, and your extension number. If the phone does not power on or displays an error, consult the Troubleshooting section or your system administrator.
3. የአሠራር መመሪያዎች
3.1 ጥሪ ማድረግ
- የሊፍት ሞባይል ስልክ፦ ቀፎውን አንሳ ወይም ተጫን ተናጋሪ የድምጽ ማጉያውን ለማንቃት ቁልፍ.
- መደወያ ቁጥር፡- Use the numeric keypad to dial the desired telephone number.
- ጥሪን ጨርስ፡ ስልኩን ይተኩ ወይም ይጫኑ ተናጋሪ ጥሪውን ለማቆም እንደገና ቁልፍ.
3.2 ጥሪ መቀበል
- ስልኩ ሲደወል ቀፎውን ያንሱ ወይም ይጫኑት። ተናጋሪ key to answer.
3.3 የቋሚ ተግባር ቁልፎችን መጠቀም
The OpenStage 30 T features 8 fixed function keys, typically labeled with icons or common functions such as መልእክት, ያዝ, ማስተላለፍ, ጉባኤ, ቀይር, እና ድምጸ-ከል አድርግ. Refer to the icons on your specific phone for their exact functions. Press a key to activate its corresponding function.
3.4 ፕሮግራም ሊደረጉ የሚችሉ ቁልፎችን መጠቀም
The 8 programmable keys can be configured by your system administrator for various functions, such as speed dial numbers, line appearances, or advanced features. The LED next to each key indicates its status (e.g., busy, ringing, available). Press a programmable key to activate its assigned function.
3.5 Speakerphone Operation
- በጥሪ ጊዜ ስፒከር ስልኩን ለማንቃት ን ይጫኑ ተናጋሪ ቁልፍ
- ወደ ስልኩ ለመመለስ ስልኩን ያንሱ።
- የድምጽ ማጉያ ጥሪን ለማቆም፣ ይጫኑ ተናጋሪ እንደገና ቁልፍ.
3.6 የድምጽ መቆጣጠሪያ
Use the dedicated volume control keys (usually marked with '+' and '-') to adjust the handset, speakerphone, or ringer volume during a call or when the phone is idle.
4. ጥገና
4.1 ስልኩን ማጽዳት
- Disconnect the phone from the line if possible before cleaning.
- ለስላሳ ፣ ትንሽ መamp cloth to wipe the exterior surfaces of the phone.
- Do not use abrasive cleaners, solvents, or strong chemical solutions, as these can damage the phone's finish and electronic components.
- እርጥበት ወደ ማናቸውም ክፍት ቦታዎች እንዳይገባ ያድርጉ.
4.2 አጠቃላይ እንክብካቤ
- ስልኩን ከፀሐይ ብርሃን፣ ከሙቀት ምንጮች እና ከመጠን በላይ እርጥበት ያርቁ።
- ስልኩን ከመጣል ወይም ለጠንካራ ተጽእኖ ከማድረግ ተቆጠብ።
5. መላ መፈለግ
This section addresses common issues you might encounter with your OpenStage 30 T phone. As this is a system phone, many issues may require intervention from your PBX system administrator.
5.1 No Power / Display Off
- Check Line Connection: Ensure the telephone line cord is securely connected to both the phone and the wall jack/PBX port.
- Consult Administrator: If the connection is secure and the phone still has no power, there might be an issue with the digital line or the PBX system. Contact your system administrator.
5.2 የመደወያ ድምጽ የለም
- Check Handset/Speakerphone: Ensure the handset is properly seated or the speakerphone is activated.
- Verify Line Connection: Confirm the line cord is firmly connected.
- System Issue: A lack of dial tone often indicates an issue with the PBX system or the specific extension. Contact your system administrator.
5.3 ደካማ የጥሪ ጥራት
- የድምጽ መጠን አስተካክል; Use the volume keys to adjust the listening volume.
- Check Handset/Speakerphone: Ensure the handset is clean and free from obstructions, or that you are speaking clearly into the speakerphone microphone.
- Line Interference: Interference can sometimes be caused by other electronic devices. If the issue persists, report it to your system administrator.
5.4 Programmable Keys Not Working
- Configuration Issue: Programmable keys are configured by the PBX system. If they are not functioning as expected, contact your system administrator to verify their programming.
6. ዝርዝሮች
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| የምርት ስም | አንድ አድርግ |
| አምራች | ሲመንስ AG |
| የሞዴል ቁጥር | L30250-F600-C187 |
| የምርት ልኬቶች | 22 x 7 x 24 ሴሜ (8.66 x 2.76 x 9.45 ኢንች) |
| የእቃው ክብደት | 782 ግራም (1.72 ፓውንድ) |
| ሞዴል ዓመት | 2010 |
| ተጨማሪ ባህሪያት | System Phone |
| ቁሳቁስ | ፕላስቲክ |
| ባትሪዎች ያስፈልጋሉ። | አይ |
| የመቅዳት መጠን | 17 Minutes (if applicable via system features) |
| ጠቅላላ የዩኤስቢ ወደቦች | 1 (for specific system integrations, not for general user access) |
7. ዋስትና እና ድጋፍ
7.1 የዋስትና መረጃ
Specific warranty terms for the Unify OpenStage 30 T are typically provided by the vendor or system integrator at the time of purchase. Please refer to your purchase documentation or contact your supplier for detailed warranty information.
7.2 የቴክኒክ ድጋፍ
For technical assistance, configuration changes, or advanced troubleshooting, please contact your organization's IT department or the system administrator responsible for your Unify PBX system. They are equipped to provide support tailored to your specific system setup.
