Intermec SR30 Linear Imager RS232 Barcode Scanner

መግቢያ

This manual provides essential instructions for the proper setup, operation, and maintenance of your Intermec SR30 Linear Imager RS232 Barcode Scanner. Please read this manual thoroughly before using the device to ensure optimal performance and to prevent damage.

The Intermec SR30 is a high-performance linear imager designed for reliable barcode scanning in various environments, connecting via an RS232 interface.

የደህንነት መረጃ

• ስካነሩን ለከፍተኛ ሙቀት፣ እርጥበት ወይም ቀጥተኛ የፀሐይ ብርሃን አያጋልጡት።
• ስካነሩን ከመጣል ወይም ለከባድ ተጽእኖዎች ከማድረግ ይቆጠቡ።
• Do not attempt to open or modify the scanner. Refer all servicing to qualified personnel.
• Use only the power supply and cables provided or approved by Intermec.
• የባርኮድ ንባብን በትክክል ለማረጋገጥ የቃኝ መስኮቱን ንጹህ ያድርጉት።

የጥቅል ይዘቶች

ጥቅልዎ የሚከተሉትን ንጥሎች መያዙን ያረጋግጡ፡-

• Intermec SR30 Linear Imager Barcode Scanner
• RS232 Interface Cable
• የኃይል አቅርቦት ክፍል
• ሰነድ (ይህ መመሪያ ወይም ተመሳሳይ)

ማንኛውም እቃ ከጠፋ ወይም ከተበላሸ፣ እባክዎን ወዲያውኑ አቅራቢዎን ያነጋግሩ።

ማዋቀር

1. ስካነርን በማገናኘት ላይ

1. Connect the RS232 Cable: Plug the RS232 connector of the interface cable into the corresponding serial port on your host computer or POS system.
2. ከስካነር ጋር ይገናኙ፦ Plug the other end of the interface cable into the port at the base of the SR30 scanner. Ensure a secure connection.
3. የኃይል አቅርቦትን ማገናኘት; Connect the power supply unit to the power port on the interface cable or directly to the scanner base, as applicable for your specific cable configuration. Plug the power supply into a standard electrical outlet.

2. የመጀመሪያ ኃይል በርቷል

Once connected, the scanner should power on automatically. Observe the indicator lights (typically an LED) for initial status. The scanner may emit a short beep to indicate it is ready for operation.

3. Basic Configuration (if required)

The SR30 scanner may require configuration for specific RS232 communication parameters (e.g., baud rate, data bits, parity) to match your host system. Refer to the detailed programming guide (often a separate document with programming barcodes) for advanced configuration. For basic operation, the default settings are often sufficient.

ቃanን በማንቀሳቀስ ላይ

1. ባርኮዶችን መቃኘት

• አላማ፡ Point the scanning window of the SR30 at the barcode you wish to read. Ensure the entire barcode is within the scanner's field of view.
• ቃኝ፡ Press and hold the trigger button (if applicable) or present the barcode to the scanner's window for automatic scanning.
• ማረጋገጫ፡- A successful scan is typically indicated by an audible beep and/or a change in the LED indicator light (e.g., green light). The barcode data will be transmitted to your host system.

2. Understanding Indicators

• አረንጓዴ LED: Indicates a successful barcode read.
• Red/Amber LED: May indicate an error, scanner busy, or awaiting input. Consult the full programming guide for specific error codes or patterns.
• Beep Sounds: Different beep patterns can indicate successful reads, errors, or configuration changes.

ጥገና

ስካነርን ማጽዳት

• Regularly clean the scanning window with a soft, lint-free cloth dampበውሃ የታሸገ ወይም ለስላሳ የማይበገር ማጽጃ።
• Do not use harsh chemicals, solvents, or abrasive materials, as these can damage the scanner's surface.
• Ensure the scanner is powered off before cleaning.

ማከማቻ

ጥቅም ላይ በማይውልበት ጊዜ ስካነሩን በቀጥታ ከፀሀይ ብርሀን እና ከከፍተኛ ሙቀት ርቆ ንጹህና ደረቅ አካባቢ ያከማቹ።

መላ መፈለግ

ዝርዝሮች

• ሞዴል፡ SR30
• ክፍል ቁጥር፡- 225-727-003 (Kit)
• የስካነር አይነት፡- መስመራዊ ምስል አስተላላፊ
• በይነገጽ፡ RS232
• አምራች፡ ኢንተርሜክ
• የእቃው ክብደት፡ 0.01 ounces (approximate, scanner only)
• ክፍል፡ የአሞሌ ኮድ
• ASIN: B003T0WF3S

ዋስትና እና ድጋፍ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Intermec webጣቢያ. ለዋስትና ጥያቄዎች የግዢ ደረሰኝዎን እንደ ግዢ ማረጋገጫ ያቆዩት።

Contact your reseller or Intermec customer service for assistance with issues not covered in this manual.