DIRECTV PI21

DIRECTV PI21 Power Inserter User Manual

Model: PI21 (PI21R1-03)

ብራንድ፡ DIRECTV

1. መግቢያ

The DIRECTV PI21 Power Inserter is an essential component designed to provide power to DIRECTV Single Wire Multiswitch (SWM) Low Noise Block (LNB) converters. This device ensures proper functionality of your SWM system by delivering the necessary voltage through the coaxial cable, eliminating the need for a separate power supply at the LNB location.

Key features include a frequency range of 2000 kHz to 2150 MHz, minimal signal loss of 2 dB, and compatibility with standard 100-120 V AC input. It features F-type ports for easy integration into your existing satellite setup. The PI21 is compatible with DIRECTV Slim Line Dish Antennas and supports SWM8 and SWM16 multiswitches through a coax connection.

2. የደህንነት መረጃ

2.1 ጠቃሚ ማሳሰቢያ

This device is designed exclusively for DIRECTV systems. It is NOT compatible with DISH Network or any other cable provider. Attempting to use it with incompatible systems may cause damage to the power inserter or connected equipment.

2.2 አጠቃላይ የደህንነት መመሪያዎች

3. ማዋቀር እና መጫን

3.1 የጥቅል ይዘቶች

3.2 ግንኙነት አልቋልview

The PI21 Power Inserter features two F-type coaxial ports: 'SIGNAL TO IRD' and 'POWER TO SWM'. These ports are clearly labeled on the unit for correct connection.

DIRECTV PI21 Power Inserter with power cord and coaxial ports

ምስል 1 - ተጠናቀቀview of the DIRECTV PI21 Power Inserter.

ፊት ለፊት view of DIRECTV PI21 Power Inserter showing 'SIGNAL TO IRD' and 'POWER TO SWM' ports

ምስል 2: የፊት view detailing the 'SIGNAL TO IRD' and 'POWER TO SWM' coaxial ports.

3.3 የመጫኛ ደረጃዎች

  1. Connect to SWM: Connect a coaxial cable from the 'POWER TO SWM' port on the PI21 to the SWM LNB or SWM multiswitch. This connection delivers power to the SWM system.
  2. Connect to Receiver (IRD): Connect a coaxial cable from the 'SIGNAL TO IRD' port on the PI21 to your DIRECTV receiver (IRD). This connection carries the satellite signal to your receiver.
  3. የኃይል ግንኙነት; Plug the attached AC power cord of the PI21 into a standard 100-120V AC electrical outlet.
  4. ኃይልን ያረጋግጡ፡ Check for the indicator light on the PI21 unit to confirm it is receiving power and operating correctly.

The PI21 is suitable for both indoor and outdoor installation with remote power delivery, offering flexible placement options.

3.4 የግድግዳ መጫኛ መመሪያዎች

The PI21 unit can be wall-mounted for secure placement. Follow these steps:

  1. Orient the power inserter with the coaxial connectors facing downwards.
  2. Place drywall anchors at the desired mounting hole positions on the wall.
  3. Mount the power inserter using #8, 1/4-inch slotted hex head screws, 1 inch long, through the flange mounting holes.
  4. Tighten the two screws until the power inserter is firmly mounted to the wall.
ተመለስ view of DIRECTV PI21 Power Inserter showing mounting flanges and product label

ምስል 3፡ ተመለስ view of the PI21, illustrating mounting flanges.

4. ኦፕሬሽን

Once properly connected and powered, the DIRECTV PI21 Power Inserter operates automatically. It continuously supplies the required 21V DC power to the connected SWM LNB or multiswitch, enabling it to function correctly and deliver satellite signals to your DIRECTV receiver(s).

4.1 አመልካች ብርሃን

The unit features a small LED indicator light, typically located on the top surface. This light illuminates when the power inserter is receiving AC power and is actively supplying DC power to the SWM system. A lit indicator confirms normal operation.

5. ጥገና

The DIRECTV PI21 Power Inserter is designed for reliable, low-maintenance operation. To ensure its longevity and optimal performance, consider the following:

6. መላ መፈለግ

If you experience issues with your DIRECTV system that you suspect are related to the PI21 Power Inserter, refer to the following troubleshooting steps:

6.1 No Satellite Signal or Intermittent Signal

6.2 ዩኒት አልበራም

If troubleshooting steps do not resolve the issue, contact DIRECTV customer support or a qualified technician for further assistance.

7. ቴክኒካዊ ዝርዝሮች

የሞዴል ቁጥርPI21 (PI21R1-03)
የድግግሞሽ ክልል2000 kHz እስከ 2150 MHz
Signal Loss (Insertion)2 ዲቢቢ
ግብዓት Voltage100 ቮ AC እስከ 120 ቮ ኤሲ
የውጤት ቁtage21 ቪ ዲ.ሲ
የውጤት ወቅታዊ1.2 አንድ ከፍተኛ
ከፍተኛው የኃይል ውፅዓት25.2 ዋ
ወደቦችF-type (SIGNAL TO IRD, POWER TO SWM)
የምርት ልኬቶች3 x 6 x 4 ኢንች
የእቃው ክብደት11.8 አውንስ
አምራችDIRECTV
ተኳኋኝነትDIRECTV SWM LNBs, SWM8 and SWM16 multiswitches
የምስክር ወረቀቶችUL ተዘርዝሯል።

8. ዋስትና እና ድጋፍ

For detailed warranty information, product registration, or technical support, please visit the official DIRECTV webጣቢያ ወይም በቀጥታ የደንበኛ አገልግሎታቸውን ያግኙ። ለማንኛውም የዋስትና ጥያቄዎች የግዢ ደረሰኝዎን እንደ ግዢ ማረጋገጫ እንዲያስቀምጡ ይመከራል።

You can typically find contact information and support resources on the manufacturer's website or within your DIRECTV service documentation.