1. መግቢያ
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Telwin BIMAX 162 TURBO 230V continuous wire welding machine. This machine is designed for FLUX (no gas) and MIG-MAG (gas) welding, and is also equipped for spot welding. Please read this manual thoroughly before using the equipment.
2. የደህንነት መመሪያዎች
WARNING: Welding operations can be dangerous. Always follow safety precautions to prevent injury or damage.
- የኤሌክትሪክ ድንጋጤ Always ensure the machine is properly grounded. Do not touch live electrical parts. Wear dry welding gloves.
- ጭስ እና ጋዞች; ብየዳ ለጤና አደገኛ ሊሆኑ የሚችሉ ጭስና ጋዞችን ያመነጫል። በደንብ አየር በሚተነፍስበት ቦታ ይስሩ ወይም የጭስ ማውጫ ይጠቀሙ።
- አርክ ጨረሮች፡ Arc rays can burn eyes and skin. Always wear a welding helmet with appropriate filter lenses and protective clothing.
- እሳት እና ፍንዳታ; Welding sparks and hot metal can cause fires. Keep flammable materials away from the welding area.
- ይቃጠላል፡ ሙቅ ብረት እና መሳሪያዎች ከባድ ቃጠሎ ሊያስከትሉ ይችላሉ። መከላከያ ጓንቶች እና ልብሶች ይልበሱ።
- የሚንቀሳቀሱ ክፍሎች፡- Keep hands and body clear of moving parts like wire feed rollers.
ማንኛውንም ጥገና ወይም ማስተካከያ ከማድረግዎ በፊት ሁልጊዜ የኃይል አቅርቦቱን ያላቅቁ.
3. ምርት አብቅቷልview
The Telwin BIMAX 162 TURBO is a versatile continuous wire welding machine designed for various welding tasks. Key features include:
- Multi-process Capability: Supports FLUX (no gas) and MIG-MAG (with gas) welding.
- Spot Welding Function: Equipped for spot welding with electronic time regulation.
- Integrated Fan: በሚሠራበት ጊዜ ውጤታማ የሆነ የማቀዝቀዣ ሂደትን ያረጋግጣል።
- Thermostatic Protection: Automatically shuts down the machine to prevent overheating.
- ተንቀሳቃሽነት፡- Mounted on wheels for easy movement within the workspace.
- መለዋወጫዎች፡ Supplied with FLUX welding accessories.
Image 1: Telwin BIMAX 162 TURBO 230V Welding Machine. This image shows the overall design of the welding machine, highlighting its compact structure and integrated wheels for mobility.
4. ማዋቀር
- ማሸግ እና ምርመራ; Carefully remove the welding machine from its packaging. Inspect for any signs of damage during transit. Report any damage to your supplier immediately.
- አቀማመጥ፡- Position the machine on a stable, level surface, ensuring adequate ventilation around the unit. The machine is equipped with wheels for easy relocation.
- የኃይል ግንኙነት; Connect the machine to a 230 V, 50/60 Hz single-phase power supply. Ensure the power outlet is properly grounded and capable of handling the machine's maximum power draw (up to 3.7 kW).
- የሽቦ ስፖል መጫኛ፡ Open the wire compartment and install the appropriate welding wire spool (0.1 to 1.2 mm diameter). Thread the wire through the feed mechanism according to the instructions provided on the machine or in a separate wire installation guide.
- Connecting Welding Accessories:
- መሬት ክሊamp: መሬቱን ያገናኙ clamp cable to the appropriate terminal on the machine and securely attach the clamp ወደ ሥራ ቦታው ጥሩ የኤሌክትሪክ ግንኙነትን ያረጋግጣል።
- የብየዳ ችቦ፡ Connect the welding torch cable to the designated connector on the machine. Ensure all connections are tight.
- Gas Cylinder (for MIG-MAG): If performing MIG-MAG welding, connect the gas regulator to the appropriate shielding gas cylinder and then connect the gas hose from the regulator to the machine's gas inlet.
5. የአሠራር መመሪያዎች
ከመጠቀምዎ በፊት ሁሉንም የደህንነት ጥንቃቄዎች መረዳትዎን እና መከተልዎን ያረጋግጡ።
5.1. Powering On and Initial Settings
- በማሽኑ ላይ ያለውን ዋና የኃይል ማብሪያ / ማጥፊያ ያብሩ።
- Select the desired welding process (FLUX or MIG-MAG) using the control panel.
- የብየዳውን ፍሰት ያስተካክሉ (amperage) and wire feed speed according to the material thickness and wire type. The regulation range is 30 to 145 Ampኢሬስ
5.2. FLUX Welding (No Gas)
- Ensure the machine is set to FLUX mode.
- No external shielding gas is required as the flux-cored wire produces its own shielding.
- Proceed with welding, maintaining proper arc length and travel speed.
5.3. MIG-MAG Welding (With Gas)
- Ensure the machine is set to MIG-MAG mode.
- Open the valve on the shielding gas cylinder and set the flow rate on the regulator to the recommended level for your application.
- Proceed with welding, ensuring consistent gas flow for proper shielding.
5.4. Spot Welding
- Select the spot welding function on the control panel.
- Adjust the electronic regulation for the spot welding time as required for the material thickness.
- Position the torch and activate the trigger for a controlled spot weld.
6. ጥገና
መደበኛ ጥገና የብየዳ ማሽንዎ ረጅም ጊዜ የሚቆይ እና ጥሩ አፈጻጸምን ያረጋግጣል። ማንኛውንም ጥገና ከማከናወንዎ በፊት የኃይል አቅርቦቱን ሁልጊዜ ያላቅቁ።
- በየቀኑ፥ Check the welding torch nozzle and contact tip for wear. Clean any spatter. Ensure the ground clamp connection is clean and secure.
- ሳምንታዊ/ወርሃዊ፡ Clean the wire feed rollers and guide tubes. Inspect all cables for damage. Check the cooling fan for obstructions.
- ማከማቻ፡ When not in use, store the machine in a clean, dry environment, protected from dust and moisture.
7. መላ መፈለግ
ለተለመዱ ጉዳዮች እና መፍትሄዎቻቸውን ለማግኘት ይህንን ክፍል ይመልከቱ።
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| ማሽኑ አይበራም. | No power supply; tripped circuit breaker; faulty power cable. | Check power connection and circuit breaker. Inspect power cable for damage. |
| ምንም ቅስት ወይም ደካማ ቅስት የለም. | Poor ground connection; incorrect settings; worn contact tip; wire feed issue. | Ensure good ground contact. Adjust amperage/wire speed. Replace contact tip. Check wire feed mechanism. |
| ማሽኑ ከመጠን በላይ ይሞቃል እና ይዘጋል። | Exceeded duty cycle; blocked ventilation; fan malfunction. | Allow machine to cool down. Ensure clear ventilation. Check fan operation. |
| ደካማ የብየዳ ጥራት (የቧንቧ መበታተን፣ ቧጨራ)። | Incorrect gas flow (MIG-MAG); contaminated workpiece; incorrect settings; worn consumables. | Check gas flow and connections. Clean workpiece. Adjust settings. Replace nozzle/tip. |
If problems persist, contact Telwin customer support or a qualified service technician.
8. ዝርዝሮች
| ባህሪ | ዋጋ |
|---|---|
| ሞዴል | BIMAX 162 TURBO 230V |
| ክፍል ቁጥር | 821012 |
| Product Code (from image) | 07170110 |
| Network Voltage | 230 V - 50/60 Hz (Single-phase) |
| ከፍተኛው ኃይል | 1.4 / 3.7 Kw |
| ጭነት የለም ቁtage | 31 ቮልት |
| ደንብ ክልል | 30 / 145 Ampኢሬስ |
| Electrode/Wire Diameter | ከ 0.1 እስከ 1.2 ሚ.ሜ |
| የምርት ልኬቶች (L x W x H) | 650 x 330 x 490 mm (from OCR image) |
| የእቃው ክብደት | 26 KG (from OCR image) / 25 Kilograms (from Amazon data) |
| Thermostatic Protection | አዎ |
| የብየዳ አይነቶች | FLUX (no gas), MIG-MAG (gas), Spot Welding |
| የማሳያ ዓይነት | ዲጂታል |
ማሳሰቢያ፡- ዝርዝር መግለጫዎቹ ያለማሳወቂያ ሊለወጡ ይችላሉ። በጣም ትክክለኛ የሆነውን መረጃ ለማግኘት የምርት መለያውን ይመልከቱ።
9. ዋስትና እና ድጋፍ
For warranty information, technical support, or service, please contact your authorized Telwin dealer or visit the official Telwin webጣቢያ. ለዋስትና ጥያቄዎች የግዢ ደረሰኝዎን እንደ ግዢ ማረጋገጫ ያቆዩት።
Telwin Official Webጣቢያ፡ www.telwin.com
