ማኑዋሎች+

ፕሮ-ጀክት 13072

Pro-Ject Audio - Phono Box DC

መመሪያ መመሪያ

መግቢያ

This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject Audio Phono Box DC. This compact phono preamplifier is designed to enhance the audio signal from your turntable, making it compatible with line-level inputs on your amplifier or receiver. It supports both Moving Magnet (MM) and Moving Coil (MC) cartridges, offering versatility for various turntable setups.

Pro-Ject Audio Phono Box DC, front view

ምስል 1: የፊት view of the Pro-Ject Audio Phono Box DC in black.

የደህንነት መረጃ

የጥቅል ይዘቶች

እባክዎ ፓኬጅዎ የሚከተሉትን እቃዎች እንደያዘ ያረጋግጡ፡

ማንኛውም እቃ ከጠፋ ወይም ከተበላሸ፣ እባክዎን ወዲያውኑ ቸርቻሪዎን ያነጋግሩ።

ማዋቀር

Follow these steps to correctly set up your Phono Box DC:

  1. አቀማመጥ፡- Position the Phono Box DC near your turntable and amplifier. Its compact size allows for flexible placement.
  2. Cartridge Type Selection: Locate the MM/MC switch on the rear panel of the Phono Box DC. Set it according to your turntable's cartridge type (Moving Magnet or Moving Coil). Ensure this is set correctly for optimal sound quality.
  3. Connect Turntable to Input: Connect the RCA output cables from your turntable to the "In" (Left and Right) RCA inputs on the rear of the Phono Box DC.
  4. የመሬት ሽቦን ማገናኘት; Connect the ground wire from your turntable to the ground terminal on the Phono Box DC. This is crucial for minimizing hum and noise.
  5. Connect Output to Ampማስታገሻ ፦ Connect the "Out" (Left and Right) RCA outputs from the Phono Box DC to a line-level input on your amplifier or receiver (e.g., "Aux", "CD", "Line In"). Do NOT connect it to an amplifier's dedicated "Phono" input, as this would result in over-ampማዛባት እና ማዛባት።
  6. የግንኙነት ኃይል; Connect the supplied 18V DC power adapter to the "Power 18V===" input on the rear of the Phono Box DC, then plug the adapter into a suitable power outlet.
Pro-Ject Audio Phono Box DC, rear view ከግንኙነቶች ጋር

ምስል 2: የኋላ view showing input, output, MM/MC switch, ground terminal, and power input.

በመስራት ላይ

Once all connections are made and the power is supplied, the Phono Box DC is ready for operation. There are no additional controls on the unit beyond the MM/MC switch. Simply select the correct cartridge type, and the unit will automatically process the audio signal from your turntable.

ጥገና

The Pro-Ject Audio Phono Box DC requires minimal maintenance:

መላ መፈለግ

If you encounter issues with your Phono Box DC, refer to the following common problems and solutions:

ችግርሊሆን የሚችል ምክንያትመፍትሄ
ምንም ድምፅ ወይም በጣም ዝቅተኛ ድምጽ የለምIncorrect connections, MM/MC switch setting, power issue, ampየሚያነቃቃ ግብዓት።
  • Verify all RCA cables are securely connected to the correct inputs/outputs.
  • Ensure the MM/MC switch matches your cartridge type.
  • Check that the power adapter is properly connected and plugged into a live outlet.
  • የእርስዎን ያረጋግጡ amplifier is set to the correct line-level input (e.g., Aux, CD, Line In), not a dedicated Phono input.
የተዛባ ወይም ግልጽ ያልሆነ ድምጽIncorrect MM/MC switch setting, faulty cables, damaged cartridge.
  • Double-check the MM/MC switch setting.
  • Try replacing RCA cables to rule out cable issues.
  • Inspect your turntable's cartridge for damage or wear.
የሚጮህ ወይም የሚጮህ ድምጽImproper grounding, interference, faulty cables.
  • Ensure the turntable's ground wire is securely connected to the Phono Box DC's ground terminal.
  • Verify that all components (turntable, preamp, amplifier) are plugged into the same power strip or wall outlet to avoid ground loops.
  • Move the Phono Box DC away from other electronic devices that might cause interference (e.g., Wi-Fi routers, power supplies, large transformers).
  • Try different RCA cables, especially shielded ones.

ዝርዝሮች

ባህሪዝርዝር
የምርት ስምፕሮ-ጄክት
የሞዴል ቁጥር13072
የምርት ልኬቶች (L x W x H)2.95 x 4.21 x 2.83 ኢንች
የእቃው ክብደት1.19 ፓውንድ
ቁሳቁስብረት
ጥራዝtage120 ቪ
ከፍተኛ አቅርቦት ቁtage9.5 ቮልት
ዝቅተኛው አቅርቦት ጥራዝtage9.5 ቮልት (ኤሲ)
የሰርጦች ብዛት1
ዝርዝር ሜታልRIAA Response Accuracy 0.5dB (20-20,000 Hz), THD 0.01% (MM), THD 0.05% (MC)

የዋስትና መረጃ

Pro-Ject Audio Systems products are covered by a manufacturer's warranty. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For detailed warranty information, it is recommended to visit the official Pro-Ject Audio Systems webጣቢያ ወይም የተፈቀደለት አከፋፋይ ያነጋግሩ።

ድጋፍ

Should you require further assistance or have questions not covered in this manual, please contact:

ድጋፍን በሚያነጋግሩበት ጊዜ፣ እባክዎ የምርት ሞዴል ቁጥርዎን (13072) እና ዝርዝሮችን ይግዙ።

ተዛማጅ ሰነዶች - 13072

ቅድመview ፕሮ-ጄክት A1 ማዞሪያ፡ የተጠቃሚ መመሪያ፣ ማዋቀር እና መግለጫዎች
የእርስዎን Pro-Ject A1 ማዞሪያ ጠረጴዛን ለማቀናበር፣ ለመስራት እና ለመጠገን አጠቃላይ መመሪያዎች። ቴክኒካዊ ዝርዝሮችን፣ መላ ፍለጋ ምክሮችን እና የዋስትና መረጃን ያካትታል።
ቅድመview Pro-Ject T1፣ T1 Phono SB፣ T1 BT ሊታጠፍ የሚችል የተጠቃሚ መመሪያ እና የማዋቀር መመሪያ
የእርስዎን Pro-Ject T1፣ T1 Phono SB እና T1 BT መታጠፊያዎች ለማቀናበር፣ ለመስራት እና ለመጠገን አጠቃላይ መመሪያዎች። ቴክኒካዊ ዝርዝሮችን፣ መላ ፍለጋን እና የዋስትና መረጃን ያካትታል።
ቅድመview የፕሮ-ጄክት የመጀመሪያ EVO 2 ተርንቴብል፡ የማዋቀር መመሪያ፣ ዝርዝር መግለጫዎች እና የሃም መላ መፈለግ
ለፕሮ-ጄክት ዴብ ኢቮ 2 ተርንቴብል የተሟላ የማዋቀሪያ መመሪያ፣ ቴክኒካዊ ዝርዝሮች እና የኤሌክትሪክ ድምፅ መላ መፈለግ። የHi-Fi ሪከርድ ማጫወቻዎን እንዴት እንደሚገጣጠም፣ እንደሚገናኙ እና እንደሚጠብቁ ይወቁ።
ቅድመview የፕሮ-ጄክት ቱቦ ሳጥን DS3 B የተጠቃሚ መመሪያ፡ ማዋቀር፣ ግንኙነቶች እና ዝርዝር መግለጫዎች
ለፕሮ-ጄክት ቱቦ ሳጥን DS3 B ፎኖ ፕሪ አጠቃላይ የተጠቃሚ መመሪያampሊፋየር። ማዋቀርን፣ ግንኙነቶችን፣ የካርትሪጅ ቅንብሮችን፣ ቴክኒካዊ ዝርዝሮችን፣ ደህንነትን እና የተገዢነት መረጃዎችን ይሸፍናል።
ቅድመview የፕሮ-ጄክት ኤዲ ቦክስ ኤስ2 ፎን የተጠቃሚ መመሪያ
ከፍተኛ ጥራት ያለው የፎኖ ቅድመ ዝግጅት የሆነው የፕሮ-ጄክት ኤዲ ቦክስ ኤስ2 ፎኖ የተጠቃሚ መመሪያampየማጓጓዣ ማግኔት ወይም የማጓጓዣ ኮይል ካርትሬጅዎች ያሉት የማዞሪያ ጠረጴዛዎች ሊፋየር፣ የቪኒል መዝገቦችን እና የአናሎግ ምልክቶችን ዲጂታል ማድረግ እና ማከማቸት ያስችላል።
ቅድመview ፕሮ-ጄክት ፎኖ ካርትሪጅ እና ስቲለስ እንክብካቤ መመሪያ
የእርስዎን Pro-Ject phono cartridge እንዴት እንደሚንከባከቡ ይወቁ፣ የስታይለስ ማፅዳትን፣ የመዝገብ ጽዳትን በፕሮ-ጄክት ብሩሽ-ኢት እና የስታይለስ መተካትን ጨምሮ። ይህ መመሪያ የፎኖ ካርትሬጅ አስፈላጊ ክፍሎችን ይሸፍናል እና ለጥገና መመሪያዎችን ይሰጣል።