ፍሉክ 355 እውነተኛ RMS Clamp- የመለኪያ ተጠቃሚ መመሪያ

መግቢያ

The Fluke 355 digital clamp-meter is a true RMS sensing, auto-ranging multimeter designed for precise measurement of current, voltage, frequency, and resistance in various electrical testing applications. It features a robust clamp mechanism for non-contact current measurement and a comprehensive set of functions for professional use, ensuring accurate readings for both linear and non-linear loads.

የደህንነት መረጃ

Always adhere to safety precautions when working with electrical equipment. This device is designed to meet IEC safety standard 61010-2-032.

• CAT IV, 600V: Suitable for measurements at the source of the low-voltage installation, such as electricity meters and primary over-current protection equipment.
• CAT III, 1,000V: Suitable for measurements within fixed installations, including switches and industrial equipment permanently connected to the fixed installation.

Ensure proper personal protective equipment (PPE) is used, and always follow local safety regulations when operating this device.

በሣጥኑ ውስጥ ያለው

Your Fluke 355 Clamp-Meter package includes the following components:

• Fluke 355 digital clamp- ሜትር
• የሙከራ እርሳስ ስብስብ
• የሙከራ መፈተሻ ስብስብ
• አዞዎች ቅንጥብ ስብስብ
• (6) AA ባትሪዎች
• ለስላሳ መያዣ መያዣ
• የተጠቃሚ መመሪያ

Image: All components included with the Fluke 355 Clamp-Meter, neatly arranged.

የምርት ባህሪያት

• እውነተኛ የአርኤምኤስ ዳሳሽ፡- Provides accurate readings for both linear and non-linear loads, regardless of waveform.
• ከፍተኛ የጅረት መለኪያ፡ Measures AC and DC current up to 2,000A (1,400A AC RMS).
• ትልቅ የመንጋጋ መክፈቻ; 58mm (2.3 inches) jaw opening accommodates large or multiple conductors for non-contact current measurement.
• ጥራዝtagሠ መለኪያ፡ የ AC ጥራዝ ይለካልtagሠ እስከ 600 ቮ እና የዲሲ ጥራዝtagሠ እስከ 1,000 ቪ.
• Frequency and Resistance: Measures frequency up to 1kHz and resistance up to 400kΩ.
• Inrush Current Function: Analyzes surge current during motor startup and other inductive loads for stable measurements.
• ዝቅተኛ ማለፊያ ማጣሪያ፡ Reduces high-frequency interference for accurate measurements of complex waveforms.
• ዝቅተኛ/ከፍተኛ ተግባር፡ Toggles to display lowest, highest, and average readings.
• የውሂብ መያዣ፡ Freezes the reading on the display for easy documentation in tight spaces.
• ቀጣይነት Buzzer፡ Confirms electrical continuity.
• የኋላ ብርሃን LCD: Improves visibility in low-light conditions, with automatic backlight shut-off.
• ራስ-ሰር ኃይል ጠፍቷል; Conserves battery life by automatically turning off after 20 minutes of non-use.
• ዝቅተኛ ባትሪ አመልካች፡- Signals when batteries need replacement.

ማዋቀር

የባትሪ ጭነት

The Fluke 355 requires six 1.5V AA batteries for operation. These are typically included with your purchase.

1. በመሳሪያው ጀርባ ላይ የባትሪውን ክፍል ሽፋን ያግኙ.
2. ሽፋኑን ለመክፈት ጠመዝማዛ ይጠቀሙ.
3. Insert the six AA batteries, ensuring correct polarity (+/-).
4. የባትሪውን ክፍል ሽፋን ይቀይሩት እና ይጠብቁት.

የመጀመሪያ ምርመራ

Before first use, inspect the clamp-meter, test leads, and accessories for any signs of damage. Do not use the device if any damage is observed.

የአሠራር መመሪያዎች

በማብራት / በማጥፋት ላይ

Turn the rotary switch to any measurement function to power on the device. Turn the rotary switch to "OFF" to power off. The device will automatically power off after 20 minutes of inactivity to conserve battery life.

Measuring AC/DC Current (Clamp ተግባር)

1. Turn the rotary switch to the "A AC+DC" position.
2. የ cl ን ለመክፈት የመንጋጋ መልቀቂያውን ቁልፍ ይጫኑamp መንጋጋዎች.
3. cl ያስቀምጡamp jaws around a single conductor. Ensure the jaws are fully closed.
4. አሁን ያለውን ዋጋ በኤልሲዲ ላይ ያንብቡ።

ምስል፡- clamp jaws of the Fluke 355 securely closed around an electrical conductor for current measurement.

የመለኪያ ጥራዝtagሠ (ኤሲ/ዲሲ)

1. Connect the test leads to the appropriate input jacks (COM and V).
2. Turn the rotary switch to the "V AC+DC" position.
3. የሙከራ መመርመሪያዎችን በሚለካው ወረዳ ወይም ክፍል ላይ ያገናኙ።
4. ጥራዝ ያንብቡtagበኤልሲዲ ላይ ኢ እሴት።

የመለኪያ መቋቋም (Ω)

1. Connect the test leads to the appropriate input jacks (COM and Ω).
2. Turn the rotary switch to the "Ω" position.
3. የመቋቋም አቅምን ከመለካትዎ በፊት ወረዳው ኃይል መሟጠጡን ያረጋግጡ።
4. የሙከራ መመርመሪያዎችን በሚለኩት አካል ላይ ያገናኙ።
5. በኤልሲዲው ላይ ያለውን የመቋቋም እሴት ያንብቡ።

ሌሎች ተግባራት

• RANGE: Manually select the measurement range if auto-ranging is not desired.
• ያዝ በማሳያው ላይ ያለውን የአሁኑን ንባብ ለማቆም ይጫኑ። ለመልቀቅ እንደገና ይጫኑ።
• ዜሮ: Used to zero out DC current readings or resistance readings for lead compensation.
• ሐዝ ድግግሞሽን ይለካል።
• አስገባ፡ Measures the peak current during motor startup.
• MIN MAX: Toggles through minimum, maximum, and average readings captured during a measurement session.
• አጣራ፡ Activates a low-pass filter to reduce electrical noise for stable readings.

ምስል፡ ዝርዝር view of the Fluke 355 Clamp-Meter's display and control panel.

ጥገና

ማጽዳት

ቆጣሪውን አጽዳ ሐasing ከማስታወቂያ ጋርamp ጨርቅ እና መለስተኛ ሳሙና። ማጽጃዎችን ወይም ማሟሟቶችን አይጠቀሙ። ማሳያውን ንጹህ እና ደረቅ ያድርጉት።

የባትሪ መተካት

When the low-battery indicator appears on the display, replace all six AA batteries promptly to ensure accurate measurements. Follow the battery installation steps outlined in the Setup section.

ማከማቻ

Cl ን ያከማቹamp-meter in its soft carrying case in a dry, dust-free environment when not in use. Remove batteries if storing for extended periods to prevent leakage.

መላ መፈለግ

If the Fluke 355 Clamp-Meter is not functioning as expected, consider the following:

• ምንም ማሳያ/ኃይል የለም፡ Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary. Ensure the rotary switch is not in the "OFF" position.
• ትክክል ያልሆኑ ንባቦች; Verify that the correct measurement function is selected. Ensure test leads are properly connected and not damaged. For current measurements, ensure the clamp jaws are fully closed around a single conductor.
• የቀጣይነት ባዘር እየሰራ አይደለም፡ Ensure the device is in the continuity measurement mode and the circuit is de-energized.

For persistent issues, refer to the official Fluke support resources or contact customer service.

ዝርዝሮች

ዋስትና እና ድጋፍ

Fluke Corporation provides high-quality testing tools. For warranty information, technical support, or service, please visit the official Fluke webጣቢያ ወይም የደንበኞች አገልግሎት ክፍልን ያነጋግሩ።

ተጨማሪ መረጃ እና የድጋፍ ምንጮችን በ ላይ ማግኘት ይችላሉ። ፍሉክ መደብር በአማዞን ላይ.