Weiser GLA9471 A/A15 SMT VS

የዌይዘር ኦገስታ የእጅ መያዣ ስብስብ መመሪያ መመሪያ

Model: GLA9471 A/A15 SMT VS

መግቢያ

The Weiser Augusta Handle Set is a stylishly designed exterior door lock system from the Welcome Home series, engineered to provide maximum-security protection for your home. This handleset features a satin nickel finish, offering a modern aesthetic. It can be securely locked or unlocked using a key from the outside, or with a key or turnpiece from the inside. This manual provides comprehensive instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your handle set.

Weiser Augusta Handle Set in Satin Nickel, showing the exterior handleset with deadbolt and the interior lever.

Figure 1: Weiser Augusta Handle Set components, including the exterior handleset with deadbolt and the interior lever, all in a satin nickel finish.

ማዋቀር እና መጫን

This section outlines the steps required to properly install your Weiser Augusta Handle Set. Ensure you have all necessary tools before beginning the installation process.

የሚያስፈልጉ መሳሪያዎች፡-

የመጫኛ ደረጃዎች

  1. በሩን ያዘጋጁ; Ensure your door has a 2-1/8 inch cross bore for the handleset. If installing on a new door, follow standard door preparation guidelines for bore holes and backset.
  2. Install the Latch and Deadbolt: Insert the latch and deadbolt mechanisms into the door edge. Secure them with the provided screws. Ensure the latch bolt is facing the correct direction for your door swing.
  3. የውጪውን የእጅ መያዣ ያሰባስቡ; Place the exterior handleset through the bore holes, aligning it with the latch and deadbolt.
  4. Assemble Interior Components: Attach the interior mounting plate and lever assembly. Secure all components with the long through-bolts and screws provided.
  5. የሙከራ ተግባር Before closing the door, test the deadbolt and latch operation with the key from the outside and the turnpiece/key from the inside. Ensure smooth engagement and retraction.
  6. አድማ ሳህኖችን ጫን፡- Install the strike plates on the door frame, aligning them with the latch and deadbolt. Ensure a secure and flush fit.

የአሠራር መመሪያዎች

The Weiser Augusta Handle Set is designed for ease of use and enhanced security.

መቆለፍ እና መክፈት;

የስማርትኪ ዳግም ቁልፍ ቴክኖሎጂ፡

This handle set features SmartKey re-key technology, allowing you to re-key the lock yourself in seconds. This is useful if you want to match your lock to an existing key or if you lose a key and want to change the lock's keying.

  1. የአሁኑን ቁልፍ ያስገቡ፡ Insert your currently working key fully into the SmartKey cylinder.
  2. የማዞሪያ ቁልፍ፦ ቁልፉን በሰዓት አቅጣጫ 90 ዲግሪ ያዙሩት።
  3. የስማርትኪ መሳሪያ አስገባ፡ While the key is turned, insert the SmartKey tool firmly and fully into the small hole on the cylinder face.
  4. የአሁኑን ቁልፍ ያስወግዱ፦ Remove the current key while keeping the SmartKey tool inserted.
  5. አዲስ ቁልፍ አስገባ፡ አዲሱን ቁልፍዎን ሙሉ በሙሉ ወደ ሲሊንደሩ ያስገቡ።
  6. የስማርትኪ መሳሪያን ያስወግዱ፡ የስማርትኪ መሳሪያውን ያስወግዱ።
  7. አዲስ ቁልፍ ሞክር፦ Rotate the new key 180 degrees counter-clockwise to the original position, then remove it. Test the new key to ensure it operates the lock smoothly.

For a visual guide, please refer to the official Weiser SmartKey re-keying video tutorials available on the Weiser website or authorized channels. (Note: No video provided in JSON, so this is a general suggestion).

ጥገና

Proper maintenance will ensure the longevity and smooth operation of your Weiser Augusta Handle Set.

መላ መፈለግ

This section addresses common issues you might encounter with your Weiser Augusta Handle Set.

ችግርሊሆን የሚችል ምክንያትመፍትሄ
ቁልፉ ለማስገባት ወይም ለመዞር አስቸጋሪ ነው.Dirt or debris in keyway; worn key; internal mechanism friction.Clean keyway with compressed air. Apply silicone-based lubricant. Try a new, unworn key.
Latch or deadbolt does not retract/extend smoothly.Misalignment with strike plate; loose screws; lack of lubrication.Check strike plate alignment and adjust if necessary. Tighten all mounting screws. Lubricate internal mechanisms.
እጀታው የላላ ይመስላል።ልቅ የሚሰቀሉ ብሎኖች።Tighten the screws that secure the handleset to the door.
የስማርትኪ ቁልፍ ዳግም መጫን አልተሳካም።Incorrect key insertion/rotation; SmartKey tool not fully inserted; wrong type of key.Review the SmartKey re-keying steps carefully. Ensure the key is fully inserted and turned 90 degrees. Ensure the SmartKey tool is fully inserted. Use only Kwikset/Weiser keys.

If you continue to experience issues after attempting these solutions, please contact Weiser customer support.

ዝርዝሮች

ባህሪዝርዝር
የሞዴል ቁጥርGLA9471 A/A15 SMT VS
የምርት ስምዊዘር
ቀለምየሳቲን ኒኬል
ቁሳቁስብረት
ቅጥዘመናዊ
ጨርስየተወለወለ
የምርት ልኬቶች (L x W x H)19.2 x 12.55 x 53.75 ሴ.ሜ
የእቃው ክብደት2.38 ኪ.ግ
የመጫኛ ዘዴ2-1/8" cross bore
ANSI/BHMA CertificationGrade 2 (Deadbolt)
ልዩ ባህሪያትየስማርትኪ ዳግም ቁልፍ ቴክኖሎጂ
ባትሪዎች ያስፈልጋሉ።አይ
የተካተቱ አካላትKeyed Door Lever, Exterior Handleset, Deadbolt, Mounting Hardware

ዋስትና እና ድጋፍ

Weiser stands behind the quality of its products. Your Augusta Handle Set comes with a comprehensive warranty.

የዋስትና መረጃ፡-

ይህ ምርት የተሸፈነው በ የተወሰነ የዕድሜ ልክ ዋስትና. This warranty covers defects in material and workmanship for the lifetime of the original residential user. For full details regarding warranty coverage, limitations, and claims procedures, please refer to the official Weiser webጣቢያ ወይም የደንበኛ ድጋፍን ያነጋግሩ።

የደንበኛ ድጋፍ፡

For technical assistance, warranty claims, or general inquiries, please contact Weiser customer support through their official channels:

When contacting support, please have your product model number (GLA9471 A/A15 SMT VS) and purchase information readily available.

ተዛማጅ ሰነዶች - GLA9471 A/A15 SMT VS

ቅድመview የዊዘር ካታሎግ ኮምፕሌት ዴ ኩዊንኬሌሪ ዴ ፖርቴ እና ሴሬረስ
ኤክስፕሎሬዝ ለ ካታሎግ ዌይዘር እጅግ በጣም ብዙ የሆኑ የ quincaillerie de porte፣ ሴርሩረስ ኤሌክትሮኒኮች እና ሜካኒኮችን፣ ኢንክሉንት ሌስ ቴክኖሎጂዎችን SmartKey እና ማይክሮባንን ያፈሳሉ። የ Trouvez መግለጫዎች፣ ፊኒሽኖች እና ፕሪክስ።
ቅድመview የዌይዘር ስማርትኮድ የኤሌክትሮኒክስ የቁልፍ ሰሌዳ መቆለፊያ መጫኛ መመሪያ
ይህ መመሪያ የዌይዘር ስማርትኮድ ኤሌክትሮኒክ የቁልፍ ሰሌዳ መቆለፊያን ለመጫን እና ለመርሃግ መመሪያዎች ይሰጣል። የክፍሎችን መለየት፣ የሚያስፈልጉ መሳሪያዎችን፣ ደረጃ በደረጃ መጫንን፣ የፕሮግራም አወጣጥን ባህሪያትን፣ የስርዓት ማንቂያዎችን እና አስፈላጊ የደህንነት እርምጃዎችን ይሸፍናል።
ቅድመview Weiser SmartCode የኤሌክትሮኒክስ ቁልፍ ሰሌዳ መቆለፊያ ፈጣን ጅምር መመሪያ
የWeiser SmartCode ኤሌክትሮኒክስ ቁልፍ ሰሌዳ መቆለፊያን ለመጫን እና ለማቀድ ፈጣን ጅምር መመሪያ። ክፍሎችን፣ መሳሪያዎችን፣ የመጫን ደረጃዎችን፣ የፕሮግራም አወጣጥን ባህሪያትን፣ የስርዓት ማንቂያዎችን እና መላ መፈለግን ይሸፍናል።
ቅድመview Weiser Powerbolt 2 ኤሌክትሮኒክስ ዴድቦልት፡ የመጫኛ እና የአጠቃቀም መመሪያ
አጠቃላይ መመሪያ ለ Weiser Powerbolt 2 ኤሌክትሮኒክስ ዴድቦልት ፣ የበር መሸፈኛ ፣ የተጠቃሚ ኮዶችን ማከል እና የተጠቃሚ ኮዶችን ያስወግዳል። የSmartKey ቴክኖሎጂን ያቀርባል።
ቅድመview Weiser GED2500 ስማርት መቆለፊያ ጭነት እና የተጠቃሚ መመሪያ
ዝርዝር የመጫኛ እና የተጠቃሚ መመሪያ ለWeiser GED2500 ስማርት መቆለፊያ፣ የሚሸፍን የበር ዝግጅት፣ መቀርቀሪያ እና አድማ ተከላ፣ የውጪ እና የውስጥ ስብሰባ፣ የባትሪ ቅንብር፣ ሙከራ፣ የመተግበሪያ ውህደት እና መላ ፍለጋ።
ቅድመview የዌይዘር ሆም ኮኔክት 620 ስማርት ሎክ መጫኛ እና የተጠቃሚ መመሪያ
የዌይዘር ሆም ኮኔክት 620 ኪቦርድ ኤሌክትሮኒክ ስማርት መቆለፊያን ለመጫን፣ ለማቀናበር እና ለማስተዳደር ዝርዝር መመሪያዎች፣ መላ መፈለግ እና የስርዓት ውህደትን ጨምሮ።