ፊሸር 534474

Fischer Repair Mortar 534474 310ml Cement Grey Instruction Manual

ሞዴል፡ 534474

1. ምርት አብቅቷልview

The Fischer Repair Mortar is a ready-to-use, sprayable polymer emulsion designed for a variety of repair applications. Its stable consistency ensures ease of use, and it offers excellent resistance to weathering, aging, and UV radiation. This mortar is suitable for both indoor and outdoor use.

ቁልፍ ባህሪዎች

  • Ready-to-use formulation, eliminating the need for premixing.
  • Effective in various weather conditions, adhering even to slightly damp ገጽታዎች.
  • Designed for inconspicuous joints.
  • Suitable for both interior and exterior applications.
  • Almost odorless for comfortable use.
Fischer Repair Mortar 310ml cartridge

Figure 1: Fischer Repair Mortar 310ml cartridge, ready for use.

2. የደህንነት መረጃ

Always read the product label and safety data sheet before use. Wear appropriate personal protective equipment (PPE) such as gloves and eye protection. Ensure adequate ventilation when working indoors. Keep out of reach of children and pets. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical advice if irritation persists.

3. ማዋቀር እና ዝግጅት

3.1 የገጽታ ዝግጅት

  1. Ensure the surface is clean, free from loose particles, dust, grease, and other contaminants.
  2. The mortar can be applied to slightly damp surfaces, but excessively wet areas should be dried.
  3. For optimal adhesion, porous surfaces may benefit from light dampening prior to application.

3.2 የምርት ዝግጅት

  1. The Fischer Repair Mortar is supplied in a cartridge and is ready for immediate use; no premixing is required.
  2. Cut the tip of the cartridge nozzle to the desired bead size.
  3. Insert the cartridge into a standard caulking gun.
Fischer Repair Mortar cartridge with mortar blob

Figure 2: Fischer Repair Mortar cartridge with a sample of the grey mortar.

4. የአሠራር መመሪያዎች (መተግበሪያ)

The mortar can be applied at temperatures ranging from +5 °C to +40 °C.

4.1 General Repair Work

  1. Apply the mortar evenly into the repair area using the caulking gun.
  2. Smooth the surface immediately after application using a spatula or appropriate tool for an inconspicuous finish.
  3. Allow sufficient time for curing as per product specifications.

4.2 የተወሰኑ መተግበሪያዎች

  • Masonry Renovations: Fill cracks or gaps in masonry structures. Ensure the mortar penetrates well into the damaged areas.
  • Roof Tile Fixing: Use to secure or repair roof tiles. The mortar's weather resistance makes it suitable for exterior exposure.
  • Sealing Drill Holes: Effectively seal drill holes in various materials.
  • General Repair Work: Suitable for minor repairs on concrete, plaster, and other building materials.
Close-up of brick wall with mortar joints

ምስል 3: ዘፀample of masonry with mortar joints, illustrating a potential application area.

Bolt secured in a wall with surrounding repair mortar

ምስል 4፡ አንድ የቀድሞample of a bolt secured in a wall, demonstrating how the mortar can be used for sealing and repair around fixings.

5. ጥገና እና ማከማቻ

The Fischer Repair Mortar can be reused. To store an opened cartridge, ensure the nozzle is tightly sealed to prevent air exposure and drying. Store the product in a cool, dry place, away from direct sunlight and extreme temperatures. The mortar is temperature resistant from -30 °C to +75 °C and is frost-proof in the cartridge down to -15 °C.

5.1 ጽዳት

Clean tools and excess fresh mortar immediately with water. Cured mortar may require mechanical removal.

6. መላ መፈለግ

  • ደካማ ማጣበቂያ; Ensure the surface was properly cleaned and free of contaminants. For very porous surfaces, light dampening might improve adhesion.
  • ቀስ ብሎ ማከም; Curing time can be affected by temperature and humidity. Lower temperatures and higher humidity may prolong curing. Ensure adequate ventilation.
  • Uneven Finish: Smooth the mortar immediately after application with a suitable tool. Practice on a scrap piece if necessary.
  • Mortar Hardened in Cartridge: Ensure the nozzle was properly sealed after previous use. Store in recommended conditions.

7. ዝርዝሮች

የሞዴል ቁጥር534474
የምርት ስምፊሸር
ቀለምግራጫ
ፈሳሽ መጠን310ml (approx. 10.48 fl oz)
የንጥል ቅፅSpray (from cartridge)
የእቃው ክብደት500 ግራም (በግምት 1.1 ፓውንድ)
የአሠራር ሙቀትከ +5 ° ሴ እስከ +40 ° ሴ
የሙቀት መቋቋም-30 ° ሴ እስከ +75 ° ሴ
የውሃ መቋቋም ደረጃየውሃ መቋቋም
ልዩ ባህሪያትWeather and UV Resistant
የምርት ልኬቶች7.09 x 5.91 x 7.87 ኢንች
አጠቃቀምMasonry repair, Roof tile fixing, Hole closing, General repair

8. ዋስትና እና ድጋፍ

For warranty information or technical support, please refer to the official fischer website or contact fischer customer service directly. Details can typically be found on the product packaging or the manufacturer's official channels.

ተዛማጅ ሰነዶች - 534474

ቅድመview የፊሸር ቶግሌ ፕለግ KDS፡ ለትራፔዞይዳል ብረት ጣሪያዎች ደህንነቱ የተጠበቀ ጥገና
በመርጫ ስርዓቶች ውስጥ ከትራፔዞይድ ብረት ሉህ ጣሪያዎች ጋር ደህንነቱ የተጠበቀ የቧንቧ ማያያዣን ለመጠቀም ሁለገብ የማስተካከያ አካል የሆነውን ፊሸር ቶግሌ ፕለግ KDSን ያግኙ። የVdS እና FM ማጽደቂያዎችን፣ ከፍተኛ የመሸከም አቅም እና ቀላል መጫኛን ያካትታል። ለአየር ቱቦዎች፣ ለአየር ማናፈሻ፣ ለኃይል መስመሮች እና ለሌሎችም ተስማሚ።
ቅድመview ፊሸር ዱኦብሌድ፡ ለፈጣን ጭነት የሚያገለግል የራስ-ቁፋሮ ፕላስተርቦርድ መሰኪያ
ፈጣን እና ቀላል ጭነት እንዲሰራ የተነደፈውን ራሱን የሚቆፍር የፕላስተርቦርድ መሰኪያ የሆነውን ፊሸር ዱኦብሌድን ያግኙ። ስለ ባህሪያቱ ይወቁ፣ ተጨማሪtagበተለያዩ የግንባታ ቁሳቁሶች ውስጥ ተግባራዊነት፣ አሠራር እና አተገባበር።
ቅድመview የፊሸር ኬኤስዩ የአየር ማቀዝቀዣ ማስተካከያ ኪቶች - የቴክኒክ ዝርዝሮች እና የመጫኛ መመሪያ
ስለ Fischer KSU እና KSU S የአየር ማቀዝቀዣ ጥገና ኪቶች ዝርዝር መረጃ የ HVAC ክፍሎችን፣ ፓምፖችን እና የአየር ማራገቢያዎችን ደህንነቱ በተጠበቀ ግድግዳ ላይ ለመጫን። አፕሊኬሽኖችን፣ ተጨማሪ አገልግሎቶችን ያካትታልtages፣ የቁሳቁስ ባህሪያት እና አጠቃላይ የቴክኒክ መረጃዎች ከጭነት አቅም ጋር።
ቅድመview Fischer Folding Roof Box User Manual and Safety Instructions
Comprehensive guide for the Fischer folding roof box, including assembly, safety instructions, and technical specifications. Covers usage in multiple languages.
ቅድመview Fischer FIS V ዜሮ መርፌ ሞርታር እና መልህቅ ስርዓቶች - ቴክኒካዊ ውሂብ እና የመጫኛ መመሪያ
አጠቃላይ የቴክኒክ መመሪያ ለ Fischer FIS V Zero injection motar እና FIS A፣ RG M፣ FIS E፣ FIS HK፣ Rebar፣ እና FRAን ጨምሮ የተለያዩ መልህቅ ሲስተሞች። ዝርዝር መግለጫዎች፣ የመጫኛ መመሪያዎች፣ የሙቀት/ጊዜ ውሂብ እና ለግንባታ ባለሙያዎች የምርት መረጃን ያቀርባል።
ቅድመview Allgemeine bauaufsichtliche Zulassung / Allgemeine Bauartgenehmigung für fischer FWS II Sanierungsanker
This document is a general building supervisory approval (Zulassung/Bauartgenehmigung) issued by the Deutsches Institut für Bautechnik (DIBt) for the fischer FWS II repair anchor system with FIS V Plus injection mortar. It details the product's technical specifications, application scope for securing outer shells of three-layer external wall panels, and requirements for planning, dimensioning, execution, and quality control. The approval is valid from October 22, 2025, to November 13, 2029.