ECHO ECS300T 26.9cc የነዳጅ ቼይንሶው የተጠቃሚ መመሪያ

1. መግቢያ

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your ECHO ECS300T 26.9cc Gasoline Chainsaw. Please read this manual thoroughly before operating the chainsaw and keep it for future reference. Proper use and maintenance will ensure optimal performance and extend the life of your tool.

2. የደህንነት መረጃ

WARNING: Chainsaws are dangerous tools. Improper use can result in serious injury or death. Always follow safety guidelines.

• Always wear appropriate personal protective equipment (PPE), including a helmet, eye protection, hearing protection, gloves, and safety boots.
• የስራ ቦታው ከተመልካቾች በተለይም ከህፃናት እና የቤት እንስሳት ንጹህ መሆኑን ያረጋግጡ።
• Inspect the chainsaw before each use for loose parts, damage, or fuel leaks.
• Never operate the chainsaw when fatigued or under the influence of alcohol or drugs.
• በሁለቱም እጆች በቼይንሶው መያዣዎች ላይ በጥብቅ ይያዙ።
• Be aware of kickback and how to prevent it.
• ሞተሩ ጠፍቶና ቀዝቀዝ ባለበት ቦታ ነዳጅ እንደገና ይሙሉ።
• Store the chainsaw safely, out of reach of children.

3. የጥቅል ይዘቶች

ሲከፍቱት፣ ሁሉም እቃዎች መኖራቸውን እና ምንም ጉዳት እንደሌላቸው ያረጋግጡ፡

• ECHO ECS300T Chainsaw Unit
• Guide Bar (35 cm)
• የታየ ሰንሰለት
• መመሪያ አሞሌ ሽፋን
• Tool Kit (e.g., wrench, screwdriver)
• የተጠቃሚ መመሪያ (ይህ ሰነድ)

4. የአካል ክፍሎችን መለየት

ምስል 1፡ አልቋልview of the ECHO ECS300T Chainsaw. This image displays the complete chainsaw unit, featuring the engine housing, front and rear handles, and the 35 cm guide bar with the saw chain installed. The ECHO branding is visible on the guide bar and engine cover.

Familiarize yourself with the main components of your chainsaw:

• መመሪያ አሞሌ፡ The metal blade that supports the saw chain.
• የማየት ሰንሰለት; The cutting element that rotates around the guide bar.
• የፊት እጀታ; For stability and control during operation.
• የኋላ እጀታ; ስሮትል ቀስቅሴ እና የደህንነት መቆለፊያን ይዟል።
• ስሮትል ቀስቅሴ፡ የሞተርን ፍጥነት ይቆጣጠራል.
• ሰንሰለት ብሬክ፡ A safety device that stops the chain instantly.
• Starter Rope Handle: ሞተሩን በእጅ ለመጀመር ያገለግላል።
• ቾክ ሊቨር፡ Used for cold starting the engine.
• ዋና አምፖል፡ Pumps fuel into the carburetor for easier starting.
• የነዳጅ ታንክ ካፕ; የነዳጅ ማጠራቀሚያውን ለመሙላት።
• Chain Oil Tank Cap: የሰንሰለት ዘይት ማጠራቀሚያውን ለመሙላት።

5. ማዋቀር

5.1 Fuel and Chain Oil Preparation

This chainsaw requires a mixture of gasoline and 2-stroke engine oil. Always use fresh, high-quality unleaded gasoline and a premium 2-stroke engine oil specifically designed for air-cooled engines. Refer to the engine oil manufacturer's instructions for the correct mixing ratio (typically 50:1 or 25:1).

• የነዳጅ ድብልቅ; Mix gasoline and 2-stroke oil in a separate, approved fuel container. Shake well before filling the chainsaw's fuel tank.
• ሰንሰለት ዘይት; Fill the chain oil tank with high-quality bar and chain oil. Do not use waste oil or motor oil, as this can damage the pump and chain.

5.2 Guide Bar and Chain Installation

1. የሰንሰለቱ ፍሬኑ መቋረጡን ያረጋግጡ።
2. Remove the chain cover by loosening the two nuts.
3. Fit the chain onto the sprocket and around the guide bar, ensuring the cutting edges face the correct direction.
4. የመመሪያውን አሞሌ በሾላዎቹ ላይ ይጫኑ፣ የሰንሰለት መወጠሪያውን ፒን በመመሪያው አሞሌው ላይ ካለው ቀዳዳ ጋር በማስተካከል።
5. የሰንሰለት ሽፋኑን ይቀይሩ እና ፍሬዎችን በእጅ ያሽጉ.
6. Adjust the chain tension using the tensioning screw. The chain should be snug against the bar but still able to be pulled freely by hand. Lift the tip of the guide bar slightly while tightening the nuts to ensure proper tension.
7. የሰንሰለት ሽፋን ፍሬዎችን ሙሉ በሙሉ ያጥብቁ.

6. የአሠራር መመሪያዎች

6.1 ሞተሩን መጀመር (ቀዝቃዛ ጅምር)

1. ቼይንሶው በጠንካራ ጠፍጣፋ መሬት ላይ ያስቀምጡት.
2. የሰንሰለቱን ብሬክ ያሳትፉ።
3. በመመለሻ መስመር ላይ ነዳጅ እስኪታይ ድረስ የፕሪሚየር አምፖሉን ብዙ ጊዜ ይጫኑ.
4. Pull the choke lever to the "FULL CHOKE" position.
5. Hold the chainsaw firmly with one hand on the front handle and pull the starter rope handle briskly until the engine "pops" or attempts to start (usually 1-3 pulls).
6. Push the choke lever to the "HALF CHOKE" or "RUN" position (depending on model).
7. Pull the starter rope again until the engine starts and runs.
8. Once the engine is running, blip the throttle to disengage the choke completely.
9. የሰንሰለት ብሬክን ከማላቀቅ እና ስራ ከመጀመርዎ በፊት ሞተሩ ለጥቂት ደቂቃዎች እንዲሞቅ ይፍቀዱለት።

6.2 ሞተሩን መጀመር (ሞቅ ያለ ጅምር)

If the engine is warm, the choke may not be necessary. Simply pull the starter rope until the engine starts.

6.3 የመቁረጥ አሠራር

• Always maintain a balanced stance and firm grip.
• Plan your cuts to avoid kickback and ensure the wood is stable.
• Let the chainsaw do the work; do not force it.
• Be aware of falling branches and logs.

6.4 ሞተሩን ማቆም

Release the throttle trigger and move the engine stop switch to the "OFF" position.

7. ጥገና

Regular maintenance is crucial for the safe and efficient operation of your chainsaw.

7.1 ዕለታዊ ጥገና

• Check chain tension and adjust if necessary.
• Inspect the chain for sharpness and damage. Sharpen or replace as needed.
• የአየር ማጣሪያውን ያጽዱ.
• Check the chain oil level and refill.
• Clean debris from the guide bar groove and sprocket area.

7.2 ወቅታዊ ጥገና

• ስፓርክ ተሰኪ Inspect and clean the spark plug every 25 hours of operation. Replace if electrodes are worn or fouled.
• የነዳጅ ማጣሪያ; Inspect and replace the fuel filter annually or every 100 hours.
• የካርበሪተር ማስተካከያ; ሞተሩ በደንብ ካልሰራ፣ የካርበሪተር ማስተካከያዎችን ለማድረግ ብቃት ያለው የአገልግሎት ቴክኒሻን ያማክሩ።

8. መላ መፈለግ

9. ዝርዝሮች

• የምርት ስም፡ ኢኮ
• ሞዴል፡ ECS300T
• የሞተር መፈናቀል; 26.9 ሲሲ
• የመመሪያ አሞሌ ርዝመት፡- 35 ሴ.ሜ
• የምርት ክብደት: 5.1 ኪ.ግ
• የምርት ልኬቶች (L x W x H)፦ 28.7 ሴሜ x 23.3 ሴሜ x 21 ሴ.ሜ
• የኃይል ምንጭ፡- የነዳጅ ሞተር
• ASIN: B015IXQCHS
• መጀመሪያ የሚገኝ ቀን፡- ሴፕቴምበር 18፣ 2015

10. ዋስትና እና ድጋፍ

For warranty information, please refer to the warranty card included with your product or contact your authorized ECHO dealer or the retailer where the product was purchased. Keep your proof of purchase for warranty claims.

For technical support, spare parts, or service, please contact your local authorized ECHO service center. Contact details can typically be found on the manufacturer's official webጣቢያ ወይም በእርስዎ ቸርቻሪ በኩል.