1. መግቢያ
This manual provides essential instructions for the safe and efficient operation of your Phocos CIS10 IP68 10Amp Solar Charge Controller. The CIS10 is designed for off-grid solar light systems and battery charging, featuring automatic 12V/24VDC system voltage detection and a robust IP68 waterproof design. Please read this manual thoroughly before installation and use.
2. የደህንነት መረጃ
ጠቃሚ የደህንነት መመሪያዎች፡-
- ሁልጊዜ ባትሪውን ከቻርጅ መቆጣጠሪያው ጋር ያገናኙት, ከዚያም የፀሐይ ፓነል እና በመጨረሻም ጭነቱን ያገናኙ. በተቃራኒው ቅደም ተከተል ግንኙነቱን ያቋርጡ።
- Ensure all connections are tight and secure to prevent excessive voltage drop and loose connections.
- Install the controller in a well-ventilated area, away from flammable gases.
- መቆጣጠሪያውን እራስዎ አይበታተኑ ወይም ለመጠገን አይሞክሩ። ለአገልግሎቱ ብቁ የሆኑ ባለሙያዎችን ያነጋግሩ።
- Wear appropriate personal protective equipment (PPE) when working with batteries and solar panels.
- The controller is IP68 rated for water and dust ingress, but avoid submerging it for extended periods or exposing it to high-pressure water jets.
3. የምርት ባህሪዎች
The Phocos CIS10 Solar Charge Controller offers the following key features:
- IP68 የውሃ መከላከያ ንድፍ; Suitable for outdoor use, resistant to water spray, rain, and condensation.
- ራስ -ሰር ጥራዝtagሠ ማወቂያ፡ 12V ወይም 24V የዲሲ ሲስተም ጥራዝ በራስ -ሰር ያገኛልtagኢ.
- 5-ሰtage PWM Technology: Provides Soft Start, Bulk, Absorption, Float, and Equalization charging stages for optimal battery health and system performance.
- ሰፊ የባትሪ ተኳሃኝነት; Works with LifePo4, LTO, GEL, AGM, Lead-Acid, Calcium, and EFB batteries.
- ባለብዙ ጥበቃ ባህሪዎች Built-in protection against over-temperature, over-voltage, over-current, over-charging, over-discharging, overload, and short circuits.
- Compact and Thin Design: Maximizes solar power utilization with minimal self-power consumption.
4. ማዋቀር እና መጫን
Follow these steps for proper installation of your Phocos CIS10 controller:
- መጫን፡ Choose a suitable location for mounting the controller. Although IP68 rated, mounting in a shaded or protected area can extend its lifespan. Ensure adequate space for cable connections.
- የባትሪ ግንኙነት፡- Connect the battery cables to the controller's battery terminals first. Ensure correct polarity (positive to positive, negative to negative). The controller will automatically detect the system voltagሠ (12V ወይም 24V)።

Image 4.1: Phocos CIS10 controller showing battery, solar panel, and load connection points, along with LED indicators for status.
- የፀሐይ ፓነል ግንኙነት; Connect the solar panel cables to the controller's solar panel terminals. Observe correct polarity. The controller will begin charging the battery.
- ግንኙነትን ጫን (ከተፈለገ) If using the controller for a DC load (e.g., solar light), connect the load cables to the controller's load terminals. Ensure correct polarity.
- ግንኙነቶችን ያረጋግጡ፡ Double-check all connections for tightness and correct polarity before powering on the system.
The controller's compact design and integrated wiring simplify installation. Its IP68 rating ensures durability in various outdoor conditions.

Image 4.2: The Phocos CIS10 controller demonstrating its compact size with a ruler and highlighting its IP68 waterproof capability.
5. የአሠራር መመሪያዎች
The Phocos CIS10 operates automatically once connected. It utilizes advanced 5-stage Pulse Width Modulation (PWM) charging technology to optimize battery charging and extend battery life.
5.1. በመሙላት ላይ ኤስtages
- ለስላሳ ጅምር; Gradually increases current to the battery.
- የጅምላ ክፍያ Delivers maximum current to rapidly charge the battery to approximately 80% capacity.
- የመምጠጥ ክፍያ; ባትሪውን በቋሚ ቮልት ይሞላልtage to bring it to 100% capacity.
- ተንሳፋፊ ክፍያ Maintains the battery at a full charge by providing a small, constant voltage.
- ማመጣጠን፡ Automatically performs equalization every 28 days for calcium/EFB batteries to prevent sulfation and ensure cell balance.
5.2. Work Mode (Optional)
The CIS10 controller supports configurable work modes, such as time control and light control, which can be set using an optional external unit like the CIS-CU (sold separately). This allows for customized operation of connected loads, such as solar lights.
6. ጥገና
The Phocos CIS10 is designed for minimal maintenance due to its robust IP68 rating and epoxy-encapsulated PCB. However, periodic checks are recommended:
- የእይታ ምርመራ፡- Periodically inspect the controller and all connections for any signs of damage, corrosion, or loose wiring.
- ማጽዳት፡ If necessary, gently clean the exterior of the controller with a damp ጨርቅ. ኃይለኛ ኬሚካሎችን ወይም ሻካራ ቁሳቁሶችን አይጠቀሙ.
- የባትሪ ጤና፡ Monitor your battery's performance. The controller's equalization feature helps maintain battery health for compatible types.
7. መላ መፈለግ
The CIS10 controller includes multiple built-in protections to prevent damage. If you encounter issues, consider the following:
- No Charging/Load Output:
- ሁሉንም የገመድ ግንኙነቶች ጥብቅነት እና ትክክለኛ ፖሊነት ያረጋግጡ።
- የፀሐይ ፓነል በቂ የፀሐይ ብርሃን ማግኘቱን ያረጋግጡ።
- የባትሪውን መጠን ያረጋግጡtage is within the operating range (12V/24V).
- Check for any blown fuses in the system (if applicable).
- ከመጠን በላይ የሙቀት መከላከያ; If the controller becomes excessively hot, it may temporarily reduce or stop charging/output. Ensure it's not installed in an area with poor ventilation or direct, intense heat.
- ከመጠን በላይtagሠ/ ስር-ጥራዝtagሠ ጥበቃ፡ The controller will protect the battery from overcharging or deep discharge. If the battery voltage is too low, the load may be disconnected.
- Short Circuit/Overload Protection: If a short circuit or overload occurs on the load or solar input, the controller will temporarily shut down to protect itself and the system. Remove the fault and the controller should resume normal operation.
If problems persist, refer to the detailed specifications or contact Phocos customer support.
8. ዝርዝሮች
Detailed technical specifications for the Phocos CIS10 Solar Charge Controller:
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| የምርት ስም | ፎኮስ |
| የሞዴል ቁጥር | CIS10 |
| ስርዓት ጥራዝtage | 12V / 24V (Automatic Detection) |
| Max. Charge/Load Current | 10 Amp |
| ከፍተኛ. የፓነል ጥራዝtage | 50 ቮልት |
| የጥበቃ ደረጃ | IP68 |
| የምርት ልኬቶች | 3.23 x 2.28 x 0.79 ኢንች (82 x 58 x 20 ሚሜ) |
| የእቃው ክብደት | 5.3 አውንስ (0.33 ፓውንድ) |
| የሚደገፉ የባትሪ ዓይነቶች | LifePo4, LTO, GEL, AGM, Lead-Acid, Calcium, EFB |
| የመሙያ ቴክኖሎጂ | 5-ሰtage PWM (Soft Start, Bulk, Absorption, Float, Equalization) |
| የአሠራር ሙቀት | -60 እስከ +60 ° ሴ |
9. ዋስትና እና ድጋፍ
Phocos is a German brand known for quality assurance in solar power products. For warranty information, technical support, or service inquiries, please contact your authorized Phocos dealer or visit the official Phocos webጣቢያ. ለዋስትና ጥያቄዎች የግዢ ደረሰኝዎን ያስቀምጡ።
ለተጨማሪ ግብዓቶች እና የምርት ዝመናዎች፣ መጎብኘት ይችላሉ Phocos official webጣቢያ.





