መግቢያ
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BeA 14/32-613 Pneumatic Stapler, Model 12000215. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.
Image: The BeA 14/32-613 Pneumatic Stapler, a compact and lightweight tool, shown in its typical blue and black finish. It features a comfortable grip and a durable magazine for staples.
የደህንነት መመሪያዎች
Always follow basic safety precautions when using pneumatic tools to reduce the risk of injury. Keep this manual for future reference.
- የደህንነት መነጽሮችን እና የመስሚያ መከላከያዎችን ጨምሮ ተገቢ የግል መከላከያ መሳሪያዎችን (PPE) ይልበሱ።
- የስራ ቦታው ንጹህ፣ በደንብ መብራት እና ከእንቅፋቶች የጸዳ መሆኑን ያረጋግጡ።
- ማስተካከያዎችን ከማድረግዎ በፊት፣ መጨናነቅን ከማጽዳትዎ ወይም ጥገና ከማድረግዎ በፊት የአየር አቅርቦቱን ያላቅቁ።
- መሣሪያውን ወደ እራስዎ ወይም ወደ ሌሎች በጭራሽ አይጠቁሙ።
- ለዚህ መሳሪያ የተገለጹትን ማያያዣዎች ብቻ ይጠቀሙ።
- መሳሪያው ከተበላሸ ወይም ከተበላሸ አይጠቀሙ.
- Keep hands and body parts away from the discharge area.
የምርት ዝርዝሮች
| ባህሪ | ዝርዝር |
|---|---|
| የሞዴል ቁጥር | 12000215 |
| ዋና ዓይነት | 14 type staples |
| Staple Length Range | 5/8" to 1 1/4" |
| Crown Size | 7/16" |
| መለኪያ | 16/17 መለኪያ |
| የሥራ ጫና | 75-120 PSI |
| የአየር ፍጆታ | 0.031 cu. Ft./Cycle @ 90PSI |
| የእቃው ክብደት | 3.3 ፓውንድ |
| የምርት ልኬቶች | 7.8 x 2.2 x 10 ኢንች |
| የክወና ሁነታ | አውቶማቲክ |
| የአቅም መግለጫ | ሙሉ ማሰሪያ |
ተስማሚ ማያያዣዎች; 14/15 NK HZ, 14/18 NK HZ, 14/21 NK HZ, 14/25 NK HZ, 14/30 NK HZ, 14/32 NK HZ, 14/32 NRHZ DP.
ማዋቀር እና መጫን
1. ከአየር አቅርቦት ጋር መገናኘት
- Ensure the air compressor is off and the air hose is depressurized.
- Connect a suitable air hose (minimum 3/8" I.D.) to the tool's air inlet fitting.
- Set the air compressor pressure regulator to the recommended working pressure of 75-120 PSI. Do not exceed 120 PSI.
- ከመሥራትዎ በፊት ሁሉንም ግንኙነቶች ይፈትሹ.
2. ስቴፕልስ በመጫን ላይ
- Disconnect the tool from the air supply for safety.
- Locate the magazine latch or release mechanism.
- Open the magazine and insert a strip of compatible 14 type staples, ensuring the staple legs face downwards.
- መጽሔቱ እስኪዘጋ ድረስ ደህንነቱ በተጠበቀ ሁኔታ ይዝጉ።
- የአየር አቅርቦቱን እንደገና ያገናኙ።
የአሠራር መመሪያዎች
The BeA 14/32-613 Pneumatic Stapler is designed for applications such as furniture industry, caravans, general carpentry, pallets and boxes, and paneling.
- Ensure the tool is properly loaded with staples and connected to the air supply.
- Position the nose of the stapler firmly against the workpiece where the staple is to be driven.
- Depress the safety mechanism (if applicable) and then pull the trigger to drive a staple.
- For continuous operation, maintain pressure on the nose and trigger, moving the tool along the workpiece.
- በሚሠራበት ጊዜ ሁልጊዜ መሳሪያውን በጥብቅ ይያዙ.
የ Drive ጥልቀት ማስተካከል
This model may feature an adjustable depth of drive. Refer to the tool's specific design for the adjustment mechanism, typically a knob or lever near the nosepiece. Test on scrap material to achieve the desired staple depth.
ጥገና እና እንክብካቤ
Regular maintenance ensures the longevity and optimal performance of your stapler. The tool is designed to be easy to service.
- በየቀኑ፥ Add a few drops of pneumatic tool oil into the air inlet before each use. This lubricates internal components.
- ሳምንታዊ/ወርሃዊ፡
- Clean the tool exterior with a damp ጨርቅ. ኃይለኛ ፈሳሾችን አይጠቀሙ.
- Inspect the nosepiece and magazine for debris or staple residue and clean as necessary.
- Check all screws and fasteners for tightness and tighten if loose.
- Inspect the air hose and fittings for wear or damage. Replace if necessary.
- ማከማቻ፡ Store the tool in a clean, dry place when not in use. Disconnect from air supply.
Service Instructions and Spare Parts
For detailed service instructions and a complete list of spare parts, please refer to the documentation included with your purchase or contact BeA customer support. Regular servicing by qualified personnel is recommended for complex repairs.
መላ መፈለግ
This section addresses common issues you might encounter with your pneumatic stapler.
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| ስቴፕሎች ሙሉ በሙሉ አይነዱም። | Low air pressure; incorrect staple length; worn driver blade. | Increase air pressure (within limits); use correct staple length; contact service for blade replacement. |
| Tool misfires or skips staples | Magazine empty; incorrect staples; debris in magazine; worn feeder. | Reload staples; ensure correct staple type; clean magazine; contact service. |
| ከመሳሪያው የሚወጣ የአየር ፍሰት | ልቅ የሆኑ መገጣጠሚያዎች፤ የተበላሹ የኦ-ቀለበቶች ወይም ማኅተሞች። | Tighten fittings; contact service for seal replacement. |
| ስቴፕልስ በተደጋጋሚ ይጨመቃል | Bent staples; debris in nosepiece/magazine; worn driver. | Use unbent staples; clear debris (disconnect air first); contact service. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact BeA customer support.
ዋስትና እና ድጋፍ
BeA products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official BeA webጣቢያ.
For technical support, spare parts, or service inquiries, please contact BeA customer service through their official channels. When contacting support, please have your model number (12000215) and serial number (if applicable) ready.
BeA Official Webጣቢያ፡ www.bea-group.com
