መመሪያ መመሪያ

መግቢያ

The Palmer POCKET AMP BASS (PEPAMPBASS) is a versatile, portable preamp and effects pedal designed for active and passive bass guitars. It offers extensive sound shaping capabilities, making it suitable for various applications including gigging, recording, and practice. This manual provides detailed instructions for its setup, operation, and maintenance.

የደህንነት መረጃ

• መሳሪያውን ከመጠቀምዎ በፊት ሁሉንም መመሪያዎች በጥንቃቄ ያንብቡ.
• ክፍሉን ለዝናብ ወይም ለእርጥበት አያጋልጡት።
• ትክክለኛውን አየር ማናፈሻ ማረጋገጥ; የአየር ማናፈሻ ክፍተቶችን አያግዱ.
• Use only the specified power supply (9V DC, 200mA, center negative).
• በመብረቅ አውሎ ንፋስ ጊዜ ወይም ለረጅም ጊዜ ጥቅም ላይ በማይውልበት ጊዜ ኃይልን ያላቅቁ።
• ሁሉንም አገልግሎቶች ብቁ ለሆኑ የአገልግሎት ሰራተኞች ያመልክቱ።

የጥቅል ይዘቶች

• Palmer POCKET AMP BASS (PEPAMPBASS) unit
• የትምህርት መመሪያ (ይህ ሰነድ)
• ማሳሰቢያ፡ የኃይል አስማሚ አልተካተተም።

መቆጣጠሪያዎች እና ግንኙነቶች

የፊት ፓነል አልቋልview

Figure 1: Front panel of the Palmer POCKET AMP BASS, highlighting the input and output connections for instrument, headphones, and auxiliary devices.

• Bass In: 1/4" TS input jack for connecting your bass guitar.
• Normal/PAD -12dB Switch: Selects input sensitivity. Use "PAD -12dB" for active basses with high output to prevent clipping.
• ስልኮች፡ 1/8" TRS stereo output jack for connecting headphones.
• አክስ በ 1/8" TRS stereo input jack for connecting external audio sources like an MP3 player or smartphone for practice.
• Bass Thru: 1/4" TS output jack for sending the unprocessed bass signal directly to another amplifier or device.

ከፍተኛ የፓነል መቆጣጠሪያዎች

Figure 2: Top panel of the Palmer POCKET AMP BASS, displaying the various knobs and switches for tone shaping and effects.

• MODE Switch (Fuzz, O.DRIVE, CLEAN): Selects the primary sound mode.
  • አጽዳ፡ Provides a transparent, uncolored bass tone.
  • O.DRIVE: Adds a warm, natural overdrive.
  • FUZZ Delivers a thick, aggressive fuzz effect.
• የድራይቭ ኖብ፡ Adjusts the amount of gain or distortion for the O.DRIVE and FUZZ modes.
• BLEND Knob (Dry/Wet): Mixes the direct (dry) signal with the processed (wet) signal. Fully counter-clockwise is 100% dry, fully clockwise is 100% wet.
• SATURATE Knob: Controls the saturation and compression characteristics of the tone.
• የቮል ቁልፍ፡ የዩኒቱን አጠቃላይ የውጤት መጠን ያስተካክላል።
• F.SW Switch (MUTE/BYPASS): Controls the footswitch function.
  • ድምጸ-ከል Footswitch mutes the output.
  • ፓፓስ Footswitch toggles between active effect and true bypass.
• CAB Switch (FLAT, MODERN, VINTAGኢ፡ Selects the cabinet simulation type.
  • ጠፍጣፋ፡ No cabinet simulation, providing a raw, direct sound.
  • ዘመናዊ፡ Simulates a modern bass cabinet with full-range response.
  • ቪንTAGE: Offers a warmer, more colored sound reminiscent of classic bass cabinets.
• የ BASS ቁልፍ፡ ዝቅተኛ-ድግግሞሽ ምላሽ (EQ) ያስተካክላል።
• LEVEL Knob (Mid EQ): Adjusts the gain/cut of the selected mid-frequency.
• FREQ Knob (Mid EQ): Selects the center frequency for the semi-parametric mid-range EQ.
• HIGHS Knob: ከፍተኛ-ድግግሞሽ ምላሽ (EQ) ያስተካክላል።
• የእግር ኳስ ተጫዋች Engages/disengages the effect or mutes the output, depending on the F.SW setting.

የኋላ ፓነል ግንኙነቶች

Figure 3: Rear panel of the Palmer POCKET AMP BASS, detailing the balanced DI output, effects loop, and power input.

• DI Out (Balanced XLR): ከዲኬይን ኮንሶል ወይም ከድምጽ በይነገጽ ጋር በቀጥታ ለመገናኘት የሚያስችል ሚዛናዊ የ XLR ውፅዓት።
  • ቅድመ-/ፖስት መቀየሪያ፡ Determines whether the DI output signal is taken before (PRE) or after (POST) the internal effects and EQ.
  • GND/LIFT መቀየሪያ፡- Ground lift switch to eliminate hum caused by ground loops.
• ለ AMP (1/4" TS): Unbalanced 1/4" TS output for connecting to a bass ampማብሰያ
• FX Insert (1/4" TRS): Stereo 1/4" TRS jack for connecting external effects pedals in a send/return loop. Tip is Send, Ring is Return.
• DC 9V (200mA, Center Negative): Power input jack for a 9V DC power adapter.

ማዋቀር

1. የኃይል ግንኙነት; Connect a 9V DC, 200mA, center negative power adapter (not included) to the "DC 9V" input on the rear panel. Alternatively, the unit can be powered by a 9V battery (located in the compartment on the bottom).
2. የመሳሪያ ግንኙነት; Plug your bass guitar into the "Bass In" jack on the front panel. If using an active bass with high output, set the "Normal/PAD -12dB" switch to "PAD -12dB".
3. የውጤት ግንኙነት፡-
   • For headphones: Connect headphones to the "Phones" jack.
   • ለ amplifier: Connect the "TO AMP" jack to your bass ampየሊፋየር ግቤት.
   • For a mixing console/audio interface: Connect the "DI Out" XLR to the console/interface. Adjust the "PRE/POST" and "GND/LIFT" switches as needed.
4. ረዳት ግቤት፡- To play along with external audio, connect your audio source (e.g., smartphone) to the "Aux In" jack. The volume of the auxiliary input is controlled by the source device.
5. የውጤቶች ዑደት (አማራጭ)፦ To integrate external effects, connect a TRS cable from the "FX Insert" jack to your effects pedal(s). The Tip of the TRS cable is the Send, and the Ring is the Return.

የአሠራር መመሪያዎች

The Palmer POCKET AMP BASS offers a range of controls to shape your bass tone. Experiment with the settings to find your desired sound.

Sound Modes and Drive

• የሚለውን ተጠቀም MODE switch to select between CLEAN, O.DRIVE, and FUZZ.
• አስተካክል። መንዳት knob to control the intensity of the overdrive or fuzz effect. Start with lower settings and increase gradually.
• የ SATURATE knob adds harmonic richness and compression. Higher settings will increase sustain and density.
• የ ቀላቅል knob allows you to mix your original clean bass signal with the processed signal. This is particularly useful for retaining low-end clarity when using distortion effects.

ማመጣጠን (EQ)

• የ BASS knob boosts or cuts low frequencies.
• የ ሀይቆች knob boosts or cuts high frequencies.
• The mid-range EQ is semi-parametric:
  • የሚለውን ተጠቀም ድግግሞሽ knob to select the specific mid-frequency you wish to adjust.
  • የሚለውን ተጠቀም ደረጃ knob to boost or cut the selected mid-frequency.

Cabinet Simulation

• የ ካብ ርእሲ’ዚ ንላዕሊ’ዩ ዝፍለጥ switch allows you to select between three different cabinet simulations:
  • ጠፍጣፋ፡ Bypasses cabinet simulation.
  • ዘመናዊ፡ Provides a clear, full-range sound typical of modern bass cabinets.
  • ቪንTAGE: Offers a warmer, more colored sound reminiscent of classic bass cabinets.

Footswitch Functionality

• ያቀናብሩ F.SW switch to either MUTE or BYPASS to define the footswitch's action.
• Press the footswitch to activate the selected function.

ጥገና

• ክፍሉን ለስላሳ እና ደረቅ ጨርቅ ያጽዱ. ገላጭ ማጽጃዎችን ወይም ፈሳሾችን አይጠቀሙ.
• ክፍሉን ለከፍተኛ ሙቀት፣ እርጥበት ወይም ቀጥተኛ የፀሐይ ብርሃን ከማጋለጥ ይቆጠቡ።
• When not in use for extended periods, remove the 9V battery to prevent leakage.

መላ መፈለግ

ዝርዝሮች

ዋስትና እና ድጋፍ

For warranty information and technical support, please refer to the official Palmer website or contact your local dealer. Keep your proof of purchase for any warranty claims.

ለተጨማሪ እርዳታ፣ ን መጎብኘት ይችላሉ። Palmer Store on Amazon.