ማኑዋሎች+

Sentry BT900

Sentry BT900 On-Neck Bluetooth Headphones User Manual

መግቢያ

This manual provides instructions for the Sentry BT900 On-Neck Bluetooth Headphones. It covers setup, operation, maintenance, and troubleshooting to ensure proper use of your wireless audio device.

የጥቅል ይዘቶች

የሚከተሉት ምርቶች በምርትዎ ጥቅል ውስጥ መካተታቸውን ያረጋግጡ፡

ምርት አልቋልview

Familiarize yourself with the components of your Sentry BT900 headphones.

Sentry BT900 On-Neck Bluetooth Headphones showing the neckband and earbuds

The image displays the Sentry BT900 headphones, featuring a flexible neckband designed for comfortable wear. The earbuds are connected to the neckband, and control buttons are typically located on one side of the neckband for easy access.

ቁልፍ አካላት፡-

የጆሮ ማዳመጫዎችን መሙላት

ለመጀመሪያ ጊዜ ከመጠቀምዎ በፊት የጆሮ ማዳመጫዎቹን ሙሉ በሙሉ ይሙሉ።

  1. የዩኤስቢ ባትሪ መሙያ ገመዱን ትንሽ ጫፍ በጆሮ ማዳመጫው ላይ ካለው ማይክሮ-ዩኤስቢ ወደብ ጋር ያገናኙ።
  2. የዩኤስቢ ቻርጅ ገመዱን ትልቁን ጫፍ ከዩኤስቢ የኃይል ምንጭ ጋር ያገናኙ (ለምሳሌ፣ የኮምፒውተር ዩኤስቢ ወደብ፣ የዩኤስቢ ግድግዳ አስማሚ)።
  3. የ LED አመልካች ባትሪ እየሞላ እያለ ያበራል እና ባትሪ መሙላት ሲጠናቀቅ ቀለሙን ይቀይራል ወይም ይጠፋል።
  4. ሙሉ ክፍያ በተለምዶ ከ2-3 ሰአታት ይወስዳል።

ከብሉቱዝ መሣሪያ ጋር በማጣመር ላይ

Follow these steps to connect your headphones to a Bluetooth-enabled device:

  1. የጆሮ ማዳመጫዎቹ ጠፍተው ሙሉ በሙሉ መሞላቸውን ያረጋግጡ።
  2. ተጭነው ይያዙት። የኃይል / ባለብዙ ተግባር አዝራር for approximately 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
  3. በብሉቱዝ የነቃለት መሳሪያዎ (ስማርትፎን፣ ታብሌት፣ ወዘተ) ላይ፣ ወደ ብሉቱዝ ቅንብሮች ይሂዱ።
  4. ብሉቱዝን አንቃ እና የሚገኙ መሳሪያዎችን ፈልግ።
  5. Select 'Sentry BT900' from the list of found devices.
  6. Once paired, the LED indicator on the headphones will typically flash blue slowly or turn solid blue.
  7. If a passcode is requested, enter '0000'.

የጆሮ ማዳመጫዎችን መስራት

ማብራት/ማጥፋት፡

ሙዚቃ መልሶ ማጫወት፡

የጥሪ አስተዳደር፡

የድምጽ መቆጣጠሪያ፡-

ጥገና

ማጽዳት፡

Gently wipe the headphones and earbuds with a soft, dry cloth. For ear tips, remove them and clean with a mild soap solution if necessary, then rinse and dry completely before reattaching.

ማከማቻ፡

የጆሮ ማዳመጫዎቹን ከፀሐይ ብርሃን እና ከፍተኛ የሙቀት መጠን ራቅ አድርገው ቀዝቃዛና ደረቅ ቦታ ያስቀምጡ። ከባድ ነገሮችን በላያቸው ላይ ከማስቀመጥ ይቆጠቡ።

የባትሪ እንክብካቤ

የባትሪ ዕድሜን ለማራዘም በተደጋጋሚ ባትሪውን ሙሉ በሙሉ ከመሙላት ይቆጠቡ። ምንም እንኳን ለረጅም ጊዜ ጥቅም ላይ ባይውልም የጆሮ ማዳመጫዎችን በመደበኛነት ቻርጅ ያድርጉ።

መላ መፈለግ

Headphones do not power on:

Ensure the headphones are fully charged. Connect to a power source and attempt to power on after a few minutes.

ከመሳሪያ ጋር ማጣመር አይቻልም፡-

Ensure the headphones are in pairing mode (flashing red and blue LED). Make sure Bluetooth is enabled on your device and it is within range (typically 10 meters). Turn off and on both the headphones and the device, then try pairing again.

ዝቅተኛ ድምጽ ወይም ድምጽ የለም;

Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly paired and connected. Try re-pairing the headphones.

ደካማ የድምፅ ጥራት;

Ensure there are no obstructions between the headphones and your device. Move closer to your device. Check for interference from other wireless devices.

የመሙላት ችግሮች፡-

Verify the USB cable is securely connected to both the headphones and the power source. Try a different USB cable or power source.

ዝርዝሮች

ዋስትና እና ድጋፍ

For warranty information, please refer to the documentation included with your purchase or contact Sentry customer support.

ለዋስትና ጥያቄዎች የግዢ ማረጋገጫዎን ያስቀምጡ።