1. መግቢያ
The BLS T01L LED Closet Light is a versatile, motion-sensing lighting solution designed for various indoor applications. It features 20 super bright LEDs, offering 180 lumens of soft white light. This light can be powered by 3 AA batteries for wireless operation or via a 5V USB DC input for constant lighting. Its adjustable light beam and motion sensor provide customizable illumination and detection.
Image 1.1: The BLS T01L LED Closet Light, a 14-inch white light bar with a central motion sensor.
2. በሳጥኑ ውስጥ ያለው
ጥቅሉን ሲከፍቱ ሁሉም ክፍሎች መኖራቸውን ያረጋግጡ፡
- 1 x BLS Under Cabinet Light (Model T01L)
- 1 x የዲሲ ገመድ
- 2 x 3M ተለጣፊ ቴፖች
- 1 x መመሪያ መመሪያ (ይህ ሰነድ)
Image 2.1: The BLS T01L LED Closet Light shown with its packaging, DC cable, and mounting accessories.
3. ዝርዝሮች
| የሞዴል ስም | T01L |
| የምርት ስም | BLS |
| የብርሃን ምንጭ ዓይነት | LED (20 LEDs) |
| ብሩህነት | 180 Lumens |
| የቀለም ሙቀት | 6000 ኬልቪን (አሪፍ ነጭ) |
| ዋትtage | 2 ዋት |
| የኃይል ምንጭ | 3 x AA Batteries (not included) or 5V USB DC Input |
| የምርት ልኬቶች | 14.7"ኤል x 2.6" ዋ x 1.1" ኤች |
| የእቃው ክብደት | 7.8 አውንስ (220 ግራም) |
| ልዩ ባህሪያት | Cordless, Motion Activated, Adjustable Angle, Adjustable Motion Sensor Sensitivity |
| የመቆጣጠሪያ ዘዴ | Slide Switch (Auto/On/Off) |
| የመጫኛ ዓይነት | Screws or 3M Adhesive Tape |
| የቤት ውስጥ / የውጭ አጠቃቀም | የቤት ውስጥ |
4. ማዋቀር እና መጫን
Follow these steps to set up your BLS T01L LED Closet Light:
4.1. መሳሪያውን ማብቃት
The light can be powered by 3 AA batteries or a 5V USB DC input.
- የባትሪ ጭነት;
- Locate the battery compartment on the back of the light.
- Gently push to open the center part of the battery compartment cover.
- Insert three AA batteries (not included). One battery slides into the hole on the left, the second into the hole on the right, and the third goes into the open center between the first two. Ensure correct polarity (+/-).
- የባትሪውን ክፍል ደህንነቱ በተጠበቀ ሁኔታ ይዝጉ።
- USB DC Power:
- Connect the provided DC cable to the light's DC input port.
- Plug the other end of the DC cable into a 5V USB power source (e.g., USB wall adapter, power bank).
- ማስታወሻ፡- If using USB DC power, it is recommended to remove the AA batteries to prevent potential issues or unnecessary battery drain.
Image 4.1: Diagram illustrating the 14-inch length of the light and its power options: 3 AA batteries or USB cable.
4.2. ብርሃኑን መትከል
The BLS T01L offers multiple installation options:
- ተለጣፊ መጫኛ; Peel the backing from the 3M adhesive tapes and firmly press the light onto a clean, dry surface.
- የጭረት መጫኛ Use the provided screws to secure the light to the desired surface. This method offers a more permanent installation.
The light can be mounted either horizontally or vertically, depending on your application needs.
Image 4.2: Diagram showing horizontal and vertical installation options using screws or 3M adhesive stickers.
5. የአሠራር መመሪያዎች
5.1. ሁነታ ምርጫ
The light features a slide switch with three modes:
- AUTO ሁነታ፡ The light will automatically turn on when motion is detected within 10 feet in a dark environment. It will remain on for 20 seconds after motion ceases. The built-in light sensor ensures it only activates when ambient light is low (e.g., at night).
- ሁነታ ላይ የእንቅስቃሴ ወይም የአከባቢ ብርሃን ሁኔታዎች ምንም ቢሆኑም መብራቱ ያለማቋረጥ እንደበራ ይቆያል።
- የጠፋ ሁነታ ፦ ብርሃኑ ጠፍቶ ይቆያል።
5.2. Adjusting Motion Sensor Sensitivity
The motion sensor can be adjusted to modify its detection sensitivity and range:
- The motion sensor module is designed to swivel. Gently rotate the sensor to adjust its detection angle.
- This allows you to fine-tune the area where motion is detected, preventing unwanted activations.
Image 5.1: Illustration of how to adjust the motion sensor to control sensitivity.
5.3. Adjusting Light Beam Angle
The entire light fixture can be adjusted to direct the light beam as desired:
- The light is mounted on a bracket that allows it to swivel.
- Gently pivot the light to achieve the desired illumination angle (e.g., 90°, 120°, 180°).
ምስል 5.2፡ ዘጸamples of adjustable light beam angles (90°, 120°, 180°) for optimal illumination.
6. ጥገና
6.1. የባትሪ መተካት
When the light output diminishes or the motion sensor becomes less responsive, it may be time to replace the batteries.
- በክፍል 4.1 እንደተገለፀው የባትሪውን ክፍል ክዳን ይክፈቱ.
- የድሮውን የ AA ባትሪዎች ያስወግዱ.
- Insert three new AA batteries, ensuring correct polarity.
- የባትሪውን ክፍል ሽፋን ይዝጉ.
ማስታወሻ፡- For optimal performance and to avoid frequent battery changes, consider using high-quality alkaline or rechargeable AA batteries. If using the USB DC power option, remove the AA batteries.
6.2. ማጽዳት
To maintain the appearance and functionality of your light:
- Ensure the light is in the OFF position or disconnected from power before cleaning.
- ንጣፉን ለስላሳ እና ደረቅ ጨርቅ ይጥረጉ.
- የማጽጃ ማጽጃዎችን፣ መሟሟቶችን ወይም ጠጣር ኬሚካሎችን አይጠቀሙ፤ ምክንያቱም እነዚህ ጨርቆችን ወይም የኤሌክትሮኒክስ ክፍሎችን ሊጎዱ ይችላሉ።
7. መላ መፈለግ
If you encounter issues with your BLS T01L LED Closet Light, refer to the following common problems and solutions:
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| መብራት አይበራም ፡፡ |
|
|
| Light turns on too frequently or not enough (in AUTO mode). |
|
|
| አጭር የባትሪ ህይወት. |
|
|
| ብርሃን ደብዛዛ ነው። |
|
|
8. የዋስትና መረጃ
The BLS T01L LED Closet Light comes with an extended warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or contact BLS customer support.
9. የደንበኛ ድጋፍ
If you have any questions, require technical assistance, or need further support, please contact BLS customer service through the following channels:
- ኢሜይል፡- Refer to your product packaging or the official BLS webለአሁኑ የእውቂያ ኢሜይል ጣቢያ።
- Webጣቢያ፡ Visit the official BLS webለተደጋጋሚ ጥያቄዎች እና የድጋፍ መርጃዎች ጣቢያ።
- Amazon Store፡ እንዲሁም መጎብኘት ይችላሉ BLS Store on Amazon ለምርት መረጃ እና ለሻጭ የእውቂያ አማራጮች።
