መግቢያ
This manual provides instructions for the installation and use of the Mount Plus MP-APM-06-01 Streaming Media Player Wall Mounting Bracket. This adjustable bracket is designed to securely hold small, narrow media devices such as Apple TV, Roku, and Fire TV, weighing up to 11 lbs. It allows for discreet mounting behind a television, contributing to a clean and organized entertainment area.
የደህንነት መረጃ
- ከመጫንዎ በፊት ሁሉንም መመሪያዎች በጥንቃቄ ያንብቡ.
- Ensure the mounting surface can support the weight of the bracket and the device.
- በሚጫኑበት ጊዜ ተገቢ መሳሪያዎችን እና የደህንነት መሳሪያዎችን ይጠቀሙ።
- ከከፍተኛው የክብደት አቅም 11 ፓውንድ (5 ኪ.ግ.) አይበልጡ።
- ትናንሽ ክፍሎችን ከልጆች ያርቁ.
የጥቅል ይዘቶች
መጫኑን ከመጀመርዎ በፊት ሁሉም አካላት መኖራቸውን ያረጋግጡ።
- 1x MP-APM-06-01 Wall Mounting Bracket
- 2x Drywall Screws
- 2x ደረቅ ግድግዳ መልህቆች
- 1x Elastic Cord (for securing device)

Figure 1: Package Contents - Wall mounting bracket, screws, anchors, and elastic cord.
ማዋቀር እና መጫን
The bracket can be installed on various wall types. Ensure you select the appropriate mounting hardware for your wall material.
ደረጃ 1፡ የመጫኛ ቦታን ይምረጡ
Select a location on the wall where you intend to mount the bracket. This is typically behind your television for a concealed setup. Use a level to ensure the bracket is straight.

ምስል 2: ዘፀample of bracket mounted on a wall next to a television.
Step 2: Mark Drill Holes
Hold the bracket against the wall at the desired height and position. Use a pencil to mark the locations for the two mounting screws through the pre-drilled holes on the bracket.
ቪዲዮ 1፡ መጫኑ ተከናውኗልview showing marking drill holes for wall mounting.
Step 3: Drill Pilot Holes and Install Anchors (if applicable)
- ለእንጨት ጡቦች; Drill pilot holes using a suitable drill bit (e.g., 1/8 inch or 3mm). Secure the bracket directly with the provided screws.
- ለ Drywall: Drill pilot holes using a suitable drill bit for the provided drywall anchors. Insert the drywall anchors into the holes until flush with the wall surface.
- For Masonry/Concrete: Drill pilot holes using a masonry drill bit. Insert appropriate masonry anchors (not included) into the holes.
ደረጃ 4፡ ቅንፍውን ይጠብቁ
Align the bracket with the pilot holes/anchors. Insert the screws and tighten them until the bracket is firmly secured to the wall. Do not overtighten.

Figure 3: Detail of the rotary knob for adjustment.
የአሠራር መመሪያዎች
Adjusting and Securing Your Device
- ስፋትን አስተካክል The bracket features a rotary knob design (Figure 3) that allows you to adjust the width to fit your device. Turn the knob to expand or contract the bracket's holding arms until it snugly fits your media player. The adjustable depth ranges from 23 mm to 37 mm.
- የመሳሪያ ቦታ፡ Carefully place your streaming media player into the adjusted bracket.
- ደህንነቱ የተጠበቀ መሣሪያ፡ For added security, use the provided elastic cord to firmly hold your equipment within the bracket. Wrap the cord around the device and the bracket's securing points.
- ገመዶችን ማገናኘት; The open construction of the bracket allows for easy access to ports for connecting power, HDMI, and other necessary cables.

ምስል 4: ዘፀample of a device (Nintendo Switch) secured in the bracket.

Figure 5: Open construction allows for easy cable management.
The bracket's design ensures that remote control signals (Infrared, Radio Frequency, and Bluetooth) are not blocked when the device is mounted behind a TV.
ጥገና
- Periodically check the tightness of the mounting screws to ensure the bracket remains securely attached to the wall.
- Inspect the elastic cord for any signs of wear or damage. Replace if necessary.
- ቅንፉን ለስላሳና ደረቅ ጨርቅ ያጽዱ። ሻካራ ማጽጃዎችን ወይም ሟሟቶችን ያስወግዱ።
መላ መፈለግ
- Device does not fit: Ensure your device's width is within the adjustable range of 23 mm to 37 mm. The bracket's height is a maximum of 10 inches.
- ቅንፍ ልቅ የሆነ ስሜት ይሰማዋል፦ Re-tighten the mounting screws. If mounted on drywall, ensure anchors are properly installed and not stripped. Consider relocating to a wood stud if possible for maximum stability.
- የርቀት መቆጣጠሪያ ችግሮች; The bracket is designed not to interfere with remote signals. Test your remote by holding your device behind the TV before final mounting to confirm functionality.
ዝርዝሮች
| የሞዴል ቁጥር | MP-APM-06-01 |
| የምርት ስም | ተራራ ፕላስ |
| ቁሳቁስ | አይዝጌ ብረት |
| ቀለም | ጥቁር |
| የመጫኛ አይነት | የግድግዳ ተራራ |
| የሚስተካከል ጥልቀት | 23 ሚሜ - 37 ሚሜ (0.9 - 1.46 ኢንች) |
| Maximum Vertical Height | 10 ኢንች (254 ሚሜ) |
| ከፍተኛው የክብደት አቅም | 11 ፓውንድ (5 ኪ.ግ) |
| የእቃው ክብደት | 12 አውንስ (0.34 ኪግ) |
| የጥቅል ልኬቶች | 5.7 x 5.1 x 1.3 ኢንች |

Figure 6: Dimensional drawing of the MP-APM-06-01 bracket.
ዋስትና እና ድጋፍ
የዋስትና መረጃ ወይም የቴክኒክ ድጋፍ ለማግኘት የአምራቹን ኦፊሴላዊ አድራሻ ይመልከቱ። webጣቢያ ወይም የደንበኞች አገልግሎት ክፍልን ያነጋግሩ። ለዋስትና ጥያቄዎች የግዢ ደረሰኝዎን ያስቀምጡ።





