Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo - Instruction Manual

1. መግቢያ

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.

2. አጠቃላይ የደህንነት መመሪያዎች

Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.

• የሥራ አካባቢ ደህንነት; የስራ ቦታውን በንጽህና እና በደንብ እንዲበራ ያድርጉት. የተዝረከረኩ ወይም ጨለማ ቦታዎች አደጋዎችን ይጋብዛሉ። እንደ ተቀጣጣይ ፈሳሾች፣ ጋዞች ወይም አቧራ ባሉ ፈንጂዎች ውስጥ የኃይል መሳሪያዎችን አይጠቀሙ።
• የኤሌክትሪክ ደህንነት; እንደ ቱቦዎች፣ ራዲያተሮች፣ ክልሎች እና ማቀዝቀዣዎች ካሉ በመሬት ላይ ካሉ ወይም መሬት ላይ ካሉ ነገሮች ጋር ሰውነትን ንክኪ ያስወግዱ። ሰውነትዎ መሬት ላይ ወይም መሬት ላይ ከሆነ የኤሌክትሪክ ንዝረት የመጋለጥ እድሉ ይጨምራል።
• የግል ደህንነት; Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
• የመሳሪያ አጠቃቀም እና እንክብካቤ; የኃይል መሣሪያውን አያስገድዱ. ለትግበራዎ ትክክለኛውን የኃይል መሣሪያ ይጠቀሙ። በተሰራበት ፍጥነት ስራውን በተሻለ እና ደህንነቱ የተጠበቀ ያደርገዋል። ማናቸውንም ማስተካከያዎችን ከማድረግዎ, መለዋወጫዎችን ከመቀየርዎ ወይም የኃይል መሳሪያዎችን ከማጠራቀምዎ በፊት የባትሪውን መያዣ ከኃይል መሳሪያው ያላቅቁት.
• የባትሪ ጥቅል አጠቃቀም እና እንክብካቤ፡- በአምራቹ በተጠቀሰው ባትሪ መሙያ ብቻ ይሙሉ. ለአንድ የባትሪ ጥቅል ተስማሚ የሆነ ቻርጀር ከሌላ የባትሪ ጥቅል ጋር ሲጠቀሙ የእሳት አደጋ ሊፈጥር ይችላል። የኃይል መሳሪያዎችን በተለየ በተዘጋጁ የባትሪ ጥቅሎች ብቻ ይጠቀሙ።

3. ምርት አብቅቷልview እና ባህሪያት

The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.

• ከፍተኛ የቶርክ ውፅዓት፡ Delivers up to 140 Nm of torque, suitable for driving large or long screws.
• ተለዋዋጭ የፍጥነት መቆጣጠሪያ; Electronic speed control allows for precise adjustment, ideal for delicate applications.
• 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
• የተዋሃደ የ LED መብራት; Three power LEDs provide optimal illumination of the work area.
• Ergonomic ንድፍ; Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
• ዘላቂ ግንባታ; Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
• ቀበቶ ክሊፕ፡ A practical belt clip is included for convenient carrying and access during work.

Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).

4. ማዋቀር

4.1 የባትሪ መጫኛ (ባትሪ እና ቻርጀር ለብቻቸው ይሸጣሉ)

1. Ensure the battery is fully charged using an Einhell Power X-Change charger.
2. Align the battery pack with the base of the impact driver.
3. Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
4. To remove the battery, press the release button(s) on the sides of the battery pack and slide it out.

4.2 Bit Insertion and Removal

The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.

1. Pull the quick-change chuck sleeve forward.
2. Insert the hexagon bit fully into the chuck.
3. Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
4. To remove the bit, pull the sleeve forward again and extract the bit.

Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.

5. የአሠራር መመሪያዎች

5.1 ማብራት / ማጥፋት እና ፍጥነት መቆጣጠር

• መጀመር: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
• የፍጥነት ማስተካከያ; The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
• ለመቆም: የማብራት/አጥፋ መቀየሪያን ይልቀቁ።

5.2 Direction of Rotation

The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.

• Forward Rotation (Screwing In): Push the selector switch to the left.
• Reverse Rotation (Screwing Out): Push the selector switch to the right.
• የመቆለፊያ አቀማመጥ፡ When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.

5.3 Using the Impact Driver

• Select the appropriate impact-resistant bit for your screw type and material.
• Position the bit firmly on the screw head.
• Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
• Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.

Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.

6. ጥገና

መደበኛ ጥገና የውጤት አሽከርካሪዎን ረጅም ዕድሜ እና ጥሩ አፈፃፀም ያረጋግጣል።

• ማጽዳት፡ ከእያንዳንዱ አጠቃቀም በኋላ የመሳሪያውን መያዣ ለስላሳ በሆነ ጨርቅ ያፅዱ።amp ጨርቅ። ጠጣር ኬሚካሎችን ወይም ሻካራ ማጽጃዎችን አይጠቀሙ። የአየር ማናፈሻ ክፍተቶች ከአቧራ እና ከቆሻሻ የጸዱ መሆናቸውን ያረጋግጡ።
• ማከማቻ፡ Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
• ምርመራ፡- Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.

7. መላ መፈለግ

8. ዝርዝሮች

9. ዋስትና እና ድጋፍ

Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webጣቢያ.

The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.