1. መግቢያ
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ASTRALPOOL Aster 99 Sand Filter with Valve Ø 600. Please read these instructions thoroughly before attempting to install or operate the filter. Retain this manual for future reference.
1.1. የደህንነት መረጃ
- ማንኛውንም ጥገና ወይም አገልግሎት ከማከናወንዎ በፊት ሁል ጊዜ ከፓምፑ ጋር ያለውን ኃይል ያላቅቁ።
- ፍሳሾችን ለመከላከል ሁሉም ግንኙነቶች ደህንነታቸው የተጠበቀ እና ውሃ የማይቋረጡ መሆናቸውን ያረጋግጡ።
- ማንኛውም ክፍል ከተበላሸ ወይም ከጠፋ ማጣሪያውን አያሂዱ።
- Keep children away from the filtration system during operation and maintenance.
- ስለማንኛውም እርምጃ እርግጠኛ ካልሆኑ ለመጫን ብቃት ያለው ባለሙያ ያማክሩ።
2. ምርት አብቅቷልview እና አካላት
The ASTRALPOOL Aster 99 Sand Filter is designed for efficient swimming pool water filtration. It consists of a durable filter tank and a multi-port valve that controls the water flow through the system.

ምስል 1፡ ASTRALPOOL Aster 99 Sand Filter and Multi-port Valve. The image displays the main filter tank, which is a large, white, spherical unit, alongside a separate black multi-port valve with a handle, used for directing water flow.
2.1. ዋና አካላት፡-
- የማጣሪያ ማጠራቀሚያ; The main body where the filter media (sand) is contained.
- Multi-port Valve: Controls the operational modes of the filter (e.g., filter, backwash, rinse).
- የግፊት መለኪያ፡ Indicates the internal pressure of the filter, crucial for determining when backwashing is needed.
- የፍሳሽ መሰኪያ; Located at the bottom of the tank for draining water.
3. ዝርዝሮች
Understanding the dimensions and characteristics of your filter is important for proper installation and maintenance.

ምስል 2፡ Dimensional diagram of the ASTRALPOOL Aster Sand Filter. This diagram illustrates the filter's height (H), diameter (D), and the positions of the inlet/outlet ports (M, N, K) with a corresponding table showing values for different filter sizes (Ø 500, 600, 750).
3.1. General Specifications for Ø 600 Model:
- ዲያሜትር (ዲ) 600 ሚ.ሜ
- ቁመት (H): 900 ሚ.ሜ
- Port M (Height from base): 455 ሚ.ሜ
- Port N (Height from base): 330 ሚ.ሜ
- Port K (Connection Size): 1 1/2"
3.2. Additional Product Information:
- ASIN: B079L868QJ
- መጀመሪያ የሚገኝ ቀን፡- ኤፕሪል 29, 2025
- መለዋወጫ አቅርቦት፡- መረጃ አይገኝም።
4. ማዋቀር እና መጫን
Proper installation is crucial for the filter's performance and longevity. Follow these steps carefully.
4.1. የጣቢያ ምርጫ
- Place the filter on a firm, level surface, preferably concrete, to prevent settling.
- Ensure adequate ventilation and protection from direct sunlight and freezing temperatures.
- Allow sufficient space around the filter for maintenance and service.
4.2. Filling with Filter Media (Sand)
- Ensure the internal standpipe and laterals are properly assembled and secured.
- Place a plastic bag or cover over the standpipe opening to prevent sand from entering.
- Carefully pour the recommended amount and grade of filter sand into the tank.
- Remove the plastic bag/cover and ensure no sand has entered the standpipe.
4.3. Multi-port Valve Installation
- Carefully place the multi-port valve onto the filter tank, aligning the standpipe with the valve's opening.
- በተሰጠው cl በመጠቀም ቫልቭውን ከታንኩ ጋር ያገናኙትamp or bolts, ensuring a tight seal.
- Connect the plumbing from the pump to the "PUMP" port on the valve.
- Connect the plumbing to the pool return lines to the "RETURN" port on the valve.
- Connect a waste line to the "WASTE" port on the valve, directing water to an appropriate drainage area.
- Install the pressure gauge into the designated port on the valve.
5. የአሠራር መመሪያዎች
The multi-port valve controls the filter's functions. Always turn off the pump before changing the valve position to prevent damage.
5.1. Multi-port Valve Positions
- አጣራ፡ Normal filtering mode. Water flows through the sand, is cleaned, and returned to the pool.
- ባክዋሽ፡ Cleans the filter sand. Water flows in reverse, flushing trapped debris out the waste line.
- ያጠቡ Used after backwashing to settle the sand and flush any remaining dirty water to waste before returning to FILTER mode.
- ቆሻሻ/ማስወጣት፡ Bypasses the filter, sending water directly from the pool to the waste line. Useful for vacuuming heavy debris or lowering pool water level.
- ይድገሙት፡- Bypasses the filter, circulating water directly back to the pool. Useful for chemical distribution without filtering.
- ዝግ፥ Shuts off all flow to the filter. Use for servicing the pump or filter.
5.2. Initial Startup (First Backwash)
- Ensure the pool is filled to the proper level and all plumbing connections are secure.
- Set the multi-port valve to ባክዋሽ.
- Turn on the pump. Backwash for 2-3 minutes, or until the water in the sight glass (if present) runs clear.
- ፓምፑን ያጥፉ.
- Set the multi-port valve to ቀይር.
- Turn on the pump. Rinse for 30-60 seconds.
- ፓምፑን ያጥፉ.
- Set the multi-port valve to አጣራ.
- Turn on the pump. Note the initial pressure gauge reading; this is your clean filter pressure.
6. ጥገና
Regular maintenance ensures optimal performance and extends the life of your filter.
6.1. Backwashing
Backwash the filter when the pressure gauge reading is 8-10 PSI (0.5-0.7 bar) above the clean filter pressure, or when pool water clarity decreases. Follow the steps outlined in "5.2. Initial Startup (First Backwash)" for each backwash cycle.
6.2. ክረምት (የሚመለከተው ከሆነ)
- ፓምፑን ያጥፉ እና ኃይሉን ያላቅቁ።
- Set the multi-port valve to ዊንተርራይዝ ያድርጉ (if available) or an intermediate position between two settings to relieve pressure on the gasket.
- Remove the drain plug at the bottom of the filter tank to completely drain all water.
- Disconnect all plumbing lines and store them in a dry, frost-free area.
- Remove the pressure gauge and store it indoors.
- Cover the filter to protect it from elements.
7. መላ መፈለግ
This section addresses common issues you might encounter with your sand filter.
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| ዝቅተኛ የውሃ ፍሰት / ከፍተኛ ግፊት | Clogged filter sand; pump strainer basket full; closed valve. | Backwash the filter; clean pump strainer basket; check valve position. |
| ደመናማ ገንዳ ውሃ | Insufficient filtration time; dirty filter sand; improper chemical balance; damaged laterals. | Increase filtration time; backwash/rinse filter; test and adjust pool chemistry; inspect laterals for damage. |
| ከቫልቭ የሚወጣ ውሃ | Worn spider gasket; loose connections. | Replace spider gasket; tighten connections. |
| አሸዋ ወደ ገንዳው ይመለሳል | Damaged laterals; too much sand; improper sand grade. | Inspect and replace damaged laterals; ensure correct sand level and grade. |
8. ዋስትና እና ድጋፍ
Specific warranty details for the ASTRALPOOL Aster 99 Sand Filter with Valve Ø 600 are not provided within this manual. For warranty claims, technical support, or to inquire about spare parts, please contact your authorized ASTRALPOOL dealer or the manufacturer directly. Please have your product model and purchase date available when contacting support.
የ ASIN for this product is B079L868QJ.





