FAAC Photobeam Safety Eye XP 30 Instruction Manual

1. ምርት አብቅቷልview

The FAAC Photobeam Safety Eye XP 30 is a wall-mounted photocell designed for gate opener safety applications. It provides a reliable safety barrier by detecting obstructions in the gate's path, preventing potential accidents.

Key features include a channel selection ability that uses coded signals to prevent interference from other nearby photocells, allowing up to four pairs of XP 30 units to be installed in close proximity without issues. The unit is also protected against interference from external light sources, such as LED headlights, ensuring consistent performance.

This model is suitable for both wall and flush/column-mounted installations with an appropriate adapter.

2. የደህንነት መረጃ

ጠቃሚ፡- Read all instructions carefully before installation and operation. Failure to follow these instructions may result in injury or damage to the product.

ይህ መሳሪያ ነው። UL 325 የሚያከብር when used with FAAC Control Boards, ensuring adherence to safety standards for gate operators.
Installation and wiring should be performed by qualified personnel in accordance with local electrical codes and regulations.
ማንኛውንም ጭነት፣ ጥገና ወይም ችግር ከመፍታትዎ በፊት የኃይል አቅርቦቱ መቋረጡን ያረጋግጡ።
Do not modify the product in any way. Use only original FAAC replacement parts if necessary.
Keep the area around the photocells clear of obstructions that could block the beam or interfere with detection.

3. መጫን

The FAAC XP 30 photocell can be installed in a wall-mounted configuration or flush/column-mounted using an adapter (sold separately).

3.1 Mounting the Photocell

Choose a suitable mounting location for both the transmitter (TX) and receiver (RX) units, ensuring they are aligned and have a clear line of sight. The maximum distance between units is 100 ft. (30 m).
Securely mount the photocell units using appropriate fasteners for the chosen surface. The plastic body with a moulded front seal cover and closed-cell cable routing area seal provides protection against environmental elements.
Ensure the units are level and facing each other directly for optimal performance.

FAAC XP 30 Photobeam Safety Eye, front view showing compact design and mounting points.

ምስል 1፡ ፊት ለፊት view of the FAAC XP 30 Photobeam Safety Eye. This image displays the compact design of the photocell unit, highlighting its robust plastic body and potential mounting points. The unit is designed for easy integration into gate opener systems.

3.2 ሽቦ

Connect the power supply (24V) to both the transmitter and receiver units as per the wiring diagram provided with your FAAC control board.
The output type is Relay - N.C./N.O. (Normally Closed/Normally Open). Connect the relay output from the receiver to the safety input of your FAAC gate opener control board.
Ensure all connections are secure and properly insulated to maintain the IP54 protection class.

3.3 የሰርጥ ምርጫ

The XP 30 features 4 Channel Relay Selection. This allows for the installation of up to 4 separate photocell pairs in close proximity without interference. Refer to the specific instructions provided with your FAAC control board for details on setting the channel for each pair.

3.4 አሰላለፍ

The XP 30 features Automatic Auto-Alignment with an angle of 7º - 13.5º. After power-up, the units will automatically attempt to align. Ensure a clear line of sight between the TX and RX units. Indicators on the units (refer to the specific product diagram) will confirm successful alignment.

4. ኦፕሬሽን

Once properly installed and aligned, the FAAC XP 30 photocells continuously emit and receive an infrared beam. If an object or person breaks this beam while the gate is in motion, the photocells will signal the gate opener control board to stop or reverse the gate's movement, preventing impact.

The coded signals ensure that only the intended transmitter and receiver communicate, minimizing false triggers from other light sources or nearby photocell installations.

5. ጥገና

Regular maintenance ensures optimal performance and longevity of your FAAC XP 30 photocells.

ማጽዳት፡ የማስተላለፊያውንም ሆነ የተቀባዩን ክፍሎች ሌንሶችን በየጊዜው ለስላሳ፣ ዲ በመጠቀም ያጽዱamp cloth to remove dust, dirt, or debris that may obstruct the beam. Do not use abrasive cleaners.
ምርመራ፡- Regularly inspect the wiring for any signs of damage, fraying, or loose connections. Ensure the mounting hardware is secure.
የተግባር ሙከራ፡- Periodically test the photocells by intentionally breaking the beam with an object (e.g., a cardboard box) while the gate is closing to ensure it stops or reverses as intended.

6. መላ መፈለግ

ችግር	ሊሆን የሚችል ምክንያት	መፍትሄ
Gate does not respond to photocell beam interruption.	Misalignment of TX/RX units. የቆሸሹ ሌንሶች። Wiring issue or no power. የተሳሳተ የሰርጥ ምርጫ።	Re-align units, ensure clear line of sight. Clean lenses with a soft cloth. Check power supply (24V) and wiring connections. Verify channel settings on both photocells and control board.
False triggers or intermittent operation.	ውጫዊ የብርሃን ጣልቃገብነት። Interference from other photocells. ልቅ ግንኙነቶች.	Ensure units are properly shielded from direct sunlight or strong artificial lights. Verify correct channel selection to avoid interference from other XP 30 units. ሁሉንም የገመድ ግንኙነቶችን ያረጋግጡ እና ይጠብቁ።
No power indicator on units.	የኃይል አቅርቦት የለም። የተሳሳተ ሽቦ.	Check 24V power source. Inspect wiring for breaks or incorrect connections.

If problems persist after attempting these solutions, contact FAAC technical support or a qualified technician.

7. ዝርዝሮች

ከፍተኛ ርቀት	100 ጫማ (30 ሜ)
የኃይል አቅርቦት ቁtage	24 ቪ
Absorbed Current (RX)	30 ሚ.ኤ
Absorbed Current (TX)	20 ሚ.ኤ
የእውቂያ ደረጃ አሰጣጦች	60 VA / 24 ዋ
አሰላለፍ	Automatic Auto-Alignment
Auto-Alignment Angle	7º - 13.5º
የውጤት አይነት	Relay - N.C./N.O.
የጥበቃ ክፍል	IP54
የአሠራር ሙቀቶች	-4ºF ~ 131ºፋ (-20ºሴ ~ 55ºሴ)
ልኬቶች (LxHxD)	2.16" x 3" x 0.82" (55 ሚሜ x 76 ሚሜ x 21 ሚሜ)
ተገዢነት	UL 325 Compliant (when used with FAAC Control Boards)

8. ዋስትና እና ድጋፍ

For warranty information, please refer to the documentation provided with your purchase or contact FAAC directly. Technical support is available through FAAC's official channels for assistance with installation, operation, or troubleshooting.

Visit the official FAAC webለቅርብ ጊዜ የድጋፍ ምንጮች እና የእውቂያ መረጃ ጣቢያ።

	FAAC 770 የመሬት ውስጥ ስዊንግ ጌት ኦፕሬተር፡ የመጫኛ፣ የመቆጣጠሪያ ቦርድ እና የጥገና መመሪያ ይህ መመሪያ ለFAAC 770 የመሬት ውስጥ ስዊንግ በር ኦፕሬተር አጠቃላይ መመሪያዎችን ይሰጣል፣ ይህም ጭነትን፣ የደህንነት መመሪያዎችን፣ የE024U መቆጣጠሪያ ሰሌዳን፣ ፕሮግራሚንግን፣ ጥገናን፣ መለዋወጫዎችን እና ዋስትናን ያካትታል። ለአውቶሜትድ የተሽከርካሪ ስዊንግ በሮች ቴክኒካዊ ዝርዝሮችን እና የአሠራር አመክንዮዎችን በዝርዝር ያቀርባል።
	የFAAC DSL2000 የስላይድ በር ኦፕሬተር የመጫኛ መመሪያ ለFAAC DSL2000 Slide Gate Operator የተሟላ የመጫኛ መመሪያ፣ ደህንነትን፣ ተከላን፣ የኤሌክትሪክ ግንኙነቶችን፣ ማስተካከያዎችን፣ መለዋወጫዎችን እና መላ መፈለግን ያካትታል። የUL325 የተገዢነት መረጃን ያካትታል።
	የ FAAC የርቀት ኮድ አሰጣጥ መመሪያዎች፡ ማስተር እና ባሪያ የርቀት ፕሮግራሚንግ መመሪያ በዋና እና በባሪያ ክፍሎች መካከል ያለውን ልዩነት በመለየት የ FAAC የርቀት መቆጣጠሪያ እንዴት እንደሚሰራ ላይ አጠቃላይ መመሪያ። አዲስ የርቀት መቆጣጠሪያ ፕሮግራሞችን ለማዘጋጀት እና አዲስ ዋና የርቀት መቆጣጠሪያ ለመስራት ደረጃ በደረጃ መመሪያዎችን እና አስፈላጊ የባትሪ ደህንነት ማስጠንቀቂያዎችን ያካትታል።
	FAAC S418 ስዊንግ ጌት ኦፕሬተር - የመጫኛ እና የአሠራር መመሪያ አጠቃላይ መመሪያ ለ FAAC S418 ኤሌክትሮሜካኒካል ስዊንግ ጌት ኦፕሬተር ፣ ጭነት ፣ ቴክኒካዊ ዝርዝሮች ፣ የደህንነት ጥንቃቄዎች ፣ ቀዶ ጥገና ፣ ጥገና እና የቁጥጥር ቦርድ ዝርዝሮች።
	FAAC 402 የሃይድሮሊክ ስዊንግ ጌት ኦፕሬተር - የመጫኛ፣ የአሠራር እና የደህንነት መመሪያ ለFAAC 402 የሃይድሮሊክ ስዊንግ ጌት ኦፕሬተር አጠቃላይ መመሪያ፣ መጫንን፣ አሠራርን፣ የደህንነት ጥንቃቄዎችን፣ የ455D መቆጣጠሪያ ሰሌዳን ፕሮግራም ማድረግን፣ ጥገናን እና መላ መፈለግን ያካትታል። ቴክኒካዊ ዝርዝሮችን እና መለዋወጫዎችን ያካትታል።
	FAAC S418 ኤሌክትሮሜካኒካል ስዊንግ በር ኦፕሬተር መጫኛ እና ኦፕሬሽን መመሪያ አጠቃላይ መመሪያ ለ FAAC S418 ኤሌክትሮሜካኒካል ስዊንግ ጌት ኦፕሬተር፣ ተከላ፣ አሠራር፣ ጥገና፣ የደህንነት ጥንቃቄዎች እና ቴክኒካዊ ዝርዝሮች። በE024U መቆጣጠሪያ ሰሌዳ እና መለዋወጫዎች ላይ ዝርዝሮችን ያካትታል።

FAAC XP 30